The powder's thermal behavior on the surface of the melting pool during PTA powder surfacing Fulltext Access 7 Pages 2006
Depositions and microstructures of Mg-Si thin film by ion beam sputtering Fulltext Access 7 Pages 2006
On the evaluation of stresses in coated materials during nanoindentation with sharp indenters Fulltext Access 7 Pages 2006
Zr–Si–N films fabricated using hybrid cathodic arc and chemical vapour deposition: Structure vs. properties Fulltext Access 7 Pages 2006
Pulse and direct current plating of Ni–W alloys from ammonia–citrate electrolyte Fulltext Access 7 Pages 2006
Open-air laser-induced chemical vapor deposition of silicon carbide coatings Fulltext Access 7 Pages 2006
Laser surface cladding of Fe–B–C, Fe–B–Si and Fe–BC–Si–Al–C on plain carbon steel Fulltext Access 7 Pages 2006
Use of fuzzy logic for modeling the growth of Fe2B boride layers during boronizing Fulltext Access 7 Pages 2006
An approach to predict the solid film thickness possibly yielded from an alumina sol-gel liquid film Fulltext Access 7 Pages 2006
The role of the amino-organosilane/SiOx interphase in the barrier and mechanical performance of nanocomposites Fulltext Access 7 Pages 2006
Influence of gas flow rate on the microstructure and mechanical properties of hydroxyapatite coatings fabricated by gas tunnel type plasma spraying Fulltext Access 7 Pages 2006
Structure–property–performance relations of high-rate reactive arc-evaporated Ti–B–N nanocomposite coatings Fulltext Access 7 Pages 2006
Evaluation on wear behavior of Cr–Ag–N and Cr–W–N PVD nanocomposite coatings using two different types of tribometer Fulltext Access 7 Pages 2006
Effects of silicate concentration on anodic films formed on AZ91D magnesium alloy in solution containing silica sol Fulltext Access 7 Pages 2006
Surface modification of a polyester non-woven with a dielectric barrier discharge in air at medium pressure Fulltext Access 7 Pages 2006
A cBN-TiN composite coating for carbide inserts: Coating characterization and its applications for finish hard turning Fulltext Access 7 Pages 2006
Glow-discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment time Fulltext Access 7 Pages 2006
Physical and mechanical properties of chromium zirconium nitride thin films Fulltext Access 7 Pages 2006
Thermal resistance and apparent thermal conductivity of thin plasma-sprayed mullite coatings Fulltext Access 7 Pages 2006
Laser surface alloying of NiTi shape memory alloy with Mo for hardness improvement and reduction of Ni2+ ion release Fulltext Access 7 Pages 2006
Surface roughness and microstructure of yttria stabilized zirconia EB-PVD coatings Fulltext Access 7 Pages 2006
Yttria-stabilized zirconia films grown by radiofrequency magnetron sputtering: Structure, properties and residual stresses Fulltext Access 7 Pages 2006
Modelling the oxygen diffusion profile in TA3V and T40 during heat-treatment under air between 620 and 850 °C Fulltext Access 7 Pages 2006
Characteristics of thin surface layers of cobalt-based alloys deposited by laser cladding Fulltext Access 7 Pages 2006
Electrochemical characterisation of a PVD film of titanium on AISI 316L stainless steel Fulltext Access 7 Pages 2006
Electrodeposition of zinc–nickel compositionally modulated multilayer coatings and their corrosion behaviours Fulltext Access 7 Pages 2006
Investigation on crater morphology by high repetitive rate YAG laser-induced discharge texturing Fulltext Access 7 Pages 2006
Titanium nitride/vanadium nitride alloy coatings: mechanical properties and adhesion characteristics Fulltext Access 7 Pages 2006
Determination of film-only hardness by eliminating the effects of elastic deformation of substrate Fulltext Access 7 Pages 2006
Influence of the concentration of ZrCl4 on texture, morphology and growth rate of CVD grown α-Al2O3 coatings deposited by the AlCl3/ZrCl4/H2/CO2/H2S process Fulltext Access 7 Pages 2006
The effect of different preparation conditions on the photocatalytic activity of TiO2·SiO2/beads Fulltext Access 7 Pages 2006
Nitriding of titanium disks and industrial dental implants using hollow cathode discharge Fulltext Access 7 Pages 2006
Combined pre-annealing and pre-oxidation treatment for the processing of thermal barrier coatings on NiCoCrAlY bond coatings Fulltext Access 7 Pages 2006
Effect of tribological media on tribological properties of multilayer Cr(N)/C(DLC) coatings Fulltext Access 7 Pages 2006
Tribological behavior of CrN/WN multilayer coatings grown by ion-beam assisted deposition Fulltext Access 7 Pages 2006
Influence of surface roughness of PVD coatings on tribological performance in sliding contacts Fulltext Access 7 Pages 2006
Copper film deposition rates by a hot refractory anode vacuum arc and magnetically filtered vacuum arc Fulltext Access 7 Pages 2006
Formation of composite ternary nitride thin films by magnetron sputtering co-deposition Fulltext Access 7 Pages 2006
High temperature processing of poly-SiC substrates from the vapor phase for wafer-bonding Fulltext Access 7 Pages 2006
Filtered vacuum arc deposition of undoped and doped ZnO thin films: Electrical, optical, and structural properties Fulltext Access 7 Pages 2006
The effect of pulsed magnetron sputtering on the structure and mechanical properties of CrB2 coatings Fulltext Access 7 Pages 2006
Oxidation resistant coatings in combination with thermal barrier coatings on γ-TiAl alloys for high temperature applications Fulltext Access 7 Pages 2006
Plasma nitriding of austenitic stainless steel in N2 and N2–H2 dc pulsed discharge Fulltext Access 7 Pages 2006
Advanced burner-rig test for oxidation–corrosion resistance evaluation of MCrAlY/superalloys systems Fulltext Access 7 Pages 2006
Formation of electroless Ni–B coatings using low temperature bath and evaluation of their characteristic properties Fulltext Access 7 Pages 2006
The physical and electrochemical properties of electroless deposited nickel–phosphorus black coatings Fulltext Access 7 Pages 2006
New method for hydroxyapatite coating of titanium by the hydrothermal hot isostatic pressing technique Fulltext Access 7 Pages 2006
Thermal fatigue behavior of medium carbon steel with striated non-smooth surface Fulltext Access 7 Pages 2006
SnO2 coated Ni particles prepared by fluidized bed chemical vapor deposition Fulltext Access 7 Pages 2006
Surface modification of polymer fibre by the new atmospheric pressure cold plasma jet Fulltext Access 7 Pages 2006
Mechanical properties of interference thin films on colored stainless steel evaluated by depth-sensing nanoindentation Fulltext Access 7 Pages 2006
Use of the reverse pulse plating method to improve the properties of cobalt-molybdenum electrodeposits Fulltext Access 7 Pages 2006
SU-8 nanocomposite coatings with improved tribological performance for MEMS Fulltext Access 7 Pages 2006
The correlation between the hardness and tribological behaviour of electroplated chromium coatings sliding against ceramic and steel counterparts Fulltext Access 7 Pages 2006
Multilayer coatings by chemical vapor deposition in a fluidized bed reactor at atmospheric pressure (AP/FBR-CVD): TiN/TaN and TiN/W Fulltext Access 7 Pages 2006
Evaluation of arc ion plated NiCoCrAlYSiB coatings after oxidation at 900–1100 °C Fulltext Access 7 Pages 2006
High temperature corrosion of nanoceria coated 9Cr–1Mo ferritic steel in air and steam Fulltext Access 7 Pages 2006
Effect of NiCoCrAlYHf overlay coating on performance of Ni3Al-based alloy IC6A Fulltext Access 7 Pages 2006
The effect of roughness and pre-heating of the substrate on the morphology of aluminium coatings deposited by thermal spraying Fulltext Access 7 Pages 2006
Electrochemically synthesized polypyrrole films as primer for protective coatings on carbon steel Fulltext Access 7 Pages 2006
The effect of substrate on the electroless nickel plating of Mg and Mg alloys Fulltext Access 8 Pages 2006
Functional modules: Metal ion assembly in novel topological poly(phenylazomethine)s Fulltext Access 8 Pages 2006
Plasma-induced graft-polymerization of flame retardant monomers onto PAN fabrics Fulltext Access 8 Pages 2006
Effect of para-substituents of azobenzene side chains tethered to poly(methacrylate)s on pretilt angle photocontrol of nematic liquid crystals Fulltext Access 8 Pages 2006
Atomic layer deposition of calcium oxide and calcium hafnium oxide films using calcium cyclopentadienyl precursor Fulltext Access 8 Pages 2006
Improvement of hardness and wear resistance in stainless-steel-based surface composites fabricated by high-energy electron beam irradiation Fulltext Access 8 Pages 2006
SiO2/TiO2 thin films with variable refractive index prepared by ion beam induced and plasma enhanced chemical vapor deposition Fulltext Access 8 Pages 2006
Deposition of electroless Ni–P graded coatings and evaluation of their corrosion resistance Fulltext Access 8 Pages 2006
Characterization of hydroxyapatite/titania composite coatings codeposited by a hydrothermal–electrochemical method on titanium Fulltext Access 8 Pages 2006
A study on the flexibility of the hot-filament configuration and its implementation for diamond, boron carbide and ternary alloys deposition Fulltext Access 8 Pages 2006
Experimental design in the deposition of BN interface coatings on SiC fibers by chemical vapor deposition Fulltext Access 8 Pages 2006
Effects of solid lubricants on friction and wear behaviors of the phenolic coating under different friction conditions Fulltext Access 8 Pages 2006
Effects of low temperature thermal treatment on zinc and/or tin plated coatings of AZ91D magnesium alloy Fulltext Access 8 Pages 2006
Pulsed magnetron sputtering of chromium boride films from loose powder targets Fulltext Access 8 Pages 2006
Mechanical characterization and thermal behavior of HVOF-sprayed bond coat in thermal barrier coatings (TBCs) Fulltext Access 8 Pages 2006
Microwave-assisted deposition of uniform thin gold film on glass surface Fulltext Access 8 Pages 2006
Niobium layers on graphite: Growth parameters and thermal annealing effects Fulltext Access 8 Pages 2006
Effect of isothermal aging on the interfacial reactions between Sn–0.4Cu solder and Cu substrate with or without ENIG plating layer Fulltext Access 8 Pages 2006
Comparisons of tribological property of a-C, a-CNx and BCN coatings sliding against SiC balls in water Fulltext Access 8 Pages 2006
The lubrication of DLC coatings with mineral and biodegradable oils having different polar and saturation characteristics Fulltext Access 8 Pages 2006
Changes in the specific surface area of porous aluminium oxide films during sealing Fulltext Access 8 Pages 2006
Phase composition and stability of nanostructured 4.7 wt.% yttria-stabilized zirconia coatings deposited by atmospheric plasma spraying Fulltext Access 8 Pages 2006
Influence of film structure and composition on diffusion barrier performance of SiOx thin films deposited by PECVD Fulltext Access 8 Pages 2006
Characterization of low temperature deposited nanolayered TiN/NbN multilayer coatings by cross-sectional transmission electron microscopy Fulltext Access 8 Pages 2006