Carbon nanotubes modified with catalyst—Promising material for fuel cells Fulltext Access 6 Pages 2006
Synthesis of electrode materials by reduction of KMnO4 with NiCl2·6H2O in aqueous solutions Fulltext Access 6 Pages 2006
Preparation of LiMn2O4 at the low temperature of 250 °C using eutectic self-mixing method Fulltext Access 6 Pages 2006
Morphological differences between lithium powder and lithium foil electrode during discharge/charge Fulltext Access 6 Pages 2006
Discharge behavior of lithium/sulfur cell with TEGDME based electrolyte at low temperature Fulltext Access 6 Pages 2006
In situ XRD studies of the structural changes of ZrO2-coated LiCoO2 during cycling and their effects on capacity retention in lithium batteries Fulltext Access 6 Pages 2006
Adoption of nano-materials for the micro-layer in gas diffusion layers of PEMFCs Fulltext Access 6 Pages 2006
Study on the morphology of CsH2PO4 using the mixture of methanol and polyols Fulltext Access 6 Pages 2006
An algorithm for optimum design and macro-model development in PEMFC with exergy and cost considerations Fulltext Access 6 Pages 2006
Direct methanol fuel cell performance of Nafion®/poly(vinyl alcohol) blend membranes Fulltext Access 6 Pages 2006
Novel proton conducting polymer electrolytes based on polyparabanic acid doped with H3PO4 for high temperature fuel cell Fulltext Access 6 Pages 2006
Electrochemical properties and cycle performance of electrospun poly(vinylidene fluoride)-based fibrous membrane electrolytes for Li-ion polymer battery Fulltext Access 6 Pages 2006
Electrochemical profile of nano-particle CoAl double hydroxide/active carbon supercapacitor using KOH electrolyte solution Fulltext Access 6 Pages 2006
Structural and electrochemical properties of micro-porous polymer blend electrolytes based on PVdF-co-HFP-PAN for Li-ion battery applications Fulltext Access 6 Pages 2006
High efficiency fuel cell based uninterruptible power supply for digital equipment Fulltext Access 6 Pages 2006
Performance and ageing of an anode-supported SOFC operated in single-chamber conditions Fulltext Access 6 Pages 2006
Electrically conductive LCP–carbon composite with low carbon content for bipolar plate application in polymer electrolyte membrane fuel cell Fulltext Access 6 Pages 2006
A critical review of using the Peukert equation for determining the remaining capacity of lead-acid and lithium-ion batteries Fulltext Access 6 Pages 2006
Ionic liquid–polymer gel electrolytes based on morpholinium salt and PVdF(HFP) copolymer Fulltext Access 6 Pages 2006
Study of a PEFC power generator modular architecture based on a multi-stack association Fulltext Access 6 Pages 2006
Performance of carbon-fiber-containing LiFePO4 cathodes for high-power applications Fulltext Access 6 Pages 2006
Crystal chemistry and electrochemical characterization of layered LiNi0.5−yCo0.5−yMn2yO2 and LiCo0.5−yMn0.5−yNi2yO2 (0 ≤ 2y ≤ 1) cathodes Fulltext Access 6 Pages 2006
Asymmetric sulfonium-based molten salts with TFSI− or PF6− anion as novel electrolytes Fulltext Access 6 Pages 2006
Studies of performance degradation of a high temperature PEMFC based on H3PO4-doped PBI Fulltext Access 6 Pages 2006
Proton conducting composite membranes from sulfonated polyethersulfone Cardo and phosphotungstic acid for fuel cell application Fulltext Access 6 Pages 2006
Performance of the gold-plated titanium bipolar plates for the light weight PEM fuel cells Fulltext Access 6 Pages 2006
A bi-functional micro-porous layer with composite carbon black for PEM fuel cells Fulltext Access 6 Pages 2006
Influence of anode diffusion layer properties on performance of direct borohydride fuel cell Fulltext Access 6 Pages 2006
Using Pt sols to prepare low Pt-loading electrodes for polymer electrolyte fuel cells Fulltext Access 6 Pages 2006
Montmorillonite functionalized with perfluorinated sulfonic acid for proton-conducting organic–inorganic composite membranes Fulltext Access 6 Pages 2006
Electrochemical properties of LiCoO2 thick-film cathodes prepared by screen-printing technique Fulltext Access 6 Pages 2006
Opportunity of metallic interconnects for ITSOFC: Reactivity and electrical property Fulltext Access 6 Pages 2006
Composition and porosity graded La2−xNiO4+δ (x ≥ 0) interlayers for SOFC: Control of the microstructure via a sol–gel process Fulltext Access 6 Pages 2006
Role of TiB2 and Bi2O3 additives on the rechargeability of MnO2 in alkaline cells Fulltext Access 6 Pages 2006
Aromatic isocyanate as a new type of electrolyte additive for the improved performance of Li-ion batteries Fulltext Access 6 Pages 2006
PEM fuel cell open circuit voltage (OCV) in the temperature range of 23 °C to 120 °C Fulltext Access 6 Pages 2006
Sintering and electrical properties of Ce0.8Y0.2O1.9 powders prepared by citric acid-nitrate low-temperature combustion process Fulltext Access 6 Pages 2006
Performance of Pt–Co/C prepared by the selective deposition of Co on Pt as a cathode in PEMFCs Fulltext Access 6 Pages 2006
Nano-composite materials for high-performance and durability of solid oxide fuel cells Fulltext Access 6 Pages 2006
Simultaneous optimisation of the properties of engineered composite grids for lead-acid batteries Fulltext Access 6 Pages 2006
Preparation and properties of novel sulfonated poly(phthalazinone ether ketone) based PEM for PEM fuel cell application Fulltext Access 6 Pages 2006
Fabrication of all solid-state rechargeable lithium battery and its electrochemical properties Fulltext Access 6 Pages 2006
High-density positive electrodes containing carbon nanotubes for use in Li-ion cells Fulltext Access 6 Pages 2006
Particle size effects on temperature-dependent performance of LiCoO2 in lithium batteries Fulltext Access 6 Pages 2006
Investigations on self-discharge of gel valve-regulated lead–acid batteries Fulltext Access 6 Pages 2006
Electrochemical behavior of lead alloys in sulfuric and phosphoric acid electrolyte Fulltext Access 6 Pages 2006
Properties and application of lead–calcium–tin–aluminium–bismuth alloys for positive grids Fulltext Access 6 Pages 2006
Oxygen evolution reaction on lead–bismuth alloys in sulfuric acid solution Fulltext Access 6 Pages 2006
Sulfonic-functionalized heteropolyacid–silica nanoparticles for high temperature operation of a direct methanol fuel cell Fulltext Access 6 Pages 2006
Control of vital chemical processes in the preparation of lead-acid battery active materials Fulltext Access 6 Pages 2006
Synthesis and characterization of lead dioxide active material for lead-acid batteries Fulltext Access 6 Pages 2006
On the reaction in the lead-acid battery (as the special review-article by the 2005' Gaston Planté Medal recipient) Fulltext Access 6 Pages 2006
Effect of long-term overcharge and operated temperature on performance of rechargeable NiMH cells Fulltext Access 6 Pages 2006
Improved rechargeability of manganese oxide cathodes in alkaline cells in the presence of TiB2 and TiS2 Fulltext Access 6 Pages 2006
Electrochemical properties of amorphous and icosahedral quasicrystalline Ti45Zr35Ni17Cu3 powders Fulltext Access 6 Pages 2006
Characterization of a LiCoO2 thick film by screen-printing for a lithium ion micro-battery Fulltext Access 6 Pages 2006
Recycling of nickel from NiOOH/Ni(OH)2 electrodes of spent Ni–Cd batteries Fulltext Access 6 Pages 2006
Experimental investigations of the anode flow field of a micro direct methanol fuel cell Fulltext Access 6 Pages 2006
Oxygen reduction on a Pt70Ni30/C electrocatalyst prepared by the borohydride method in H2SO4/CH3OH solutions Fulltext Access 6 Pages 2006
The production of hydrogen by dark fermentation of municipal solid wastes and slaughterhouse waste: A two-phase process Fulltext Access 6 Pages 2006
Preparation of LaGaO3-based perovskite oxide film by a pulsed-laser ablation method and application as a solid oxide fuel cell electrolyte Fulltext Access 6 Pages 2006
Investigation of polyaniline impregnation on the performance of gas diffusion electrode (GDE) in PEMFC using binary of Nafion and polyaniline nanofiber Fulltext Access 6 Pages 2006
Room temperature molten salt as electrolyte for carbon nanotube-based electric double layer capacitors Fulltext Access 6 Pages 2006
Synthesis and characterization of LiFeO2 and LiFe0.9Co0.1O2 as cathode materials for Li-ion cells Fulltext Access 6 Pages 2006
Mechanical–electrochemical modeling of Li-ion battery designed for an electric scooter Fulltext Access 6 Pages 2006
On the lithiation–delithiation of tin and tin-based intermetallic compounds on carbon paper current collector-substrate Fulltext Access 6 Pages 2006
LiMn2O4 cathode materials synthesized by the cellulose–citric acid method for lithium ion batteries Fulltext Access 6 Pages 2006
Synthetic optimization of spherical LiCoO2 and precursor via uniform-phase precipitation Fulltext Access 6 Pages 2006
Structural and electrochemical properties of nanocrystalline LixMn2O4 thin film cathodes (x = 1.0–1.4) Fulltext Access 6 Pages 2006
Study of electrodeposited polypyrrole coatings for the corrosion protection of stainless steel bipolar plates for the PEM fuel cell Fulltext Access 6 Pages 2006
Effects of cathode open area and relative humidity on the performance of air-breathing polymer electrolyte membrane fuel cells Fulltext Access 6 Pages 2006
Gas-phase mass-transfer resistance at PEMFC electrodes: Part 1. Diffusive and forced migration through a porous medium Fulltext Access 6 Pages 2006
Durability investigation of carbon nanotube as catalyst support for proton exchange membrane fuel cell Fulltext Access 6 Pages 2006
Combustion synthesis of Sm0.5Sr0.5CoO3−x and La0.6Sr0.4CoO3−x nanopowders for solid oxide fuel cell cathodes Fulltext Access 6 Pages 2006