Control analysis of renewable energy system with hydrogen storage for residential applications Fulltext Access 8 Pages 2006
Sulfonated polyimides: Synthesis, proton conductivity and water stability Fulltext Access 8 Pages 2006
Ionic liquids containing the tetrafluoroborate anion have the best performance and stability for electric double layer capacitor applications Fulltext Access 8 Pages 2006
Effects of addition of TiO2 nanoparticles on mechanical properties and ionic conductivity of solvent-free polymer electrolytes based on porous P(VdF-HFP)/P(EO-EC) membranes Fulltext Access 8 Pages 2006
Effects of operating conditions on cell performance of PEM fuel cells with conventional or interdigitated flow field Fulltext Access 8 Pages 2006
Evaluating the enhanced performance of a novel wave-like form gas flow channel in the PEMFC using the field synergy principle Fulltext Access 8 Pages 2006
Photographic production of metal nano-particles for fuel cell electrodes Fulltext Access 8 Pages 2006
State-of-charge determination of lead-acid batteries using wire-wound coils Fulltext Access 8 Pages 2006
Design and implementation of a fuzzy logic-based state-of-charge meter for Li-ion batteries used in portable defibrillators Fulltext Access 8 Pages 2006
Recycling of nickel–cadmium batteries—Thermogravimetric behavior of electrodes Fulltext Access 8 Pages 2006
Low operational temperature Li–CFx batteries using cathodes containing sub-fluorinated graphitic materials Fulltext Access 8 Pages 2006
Intra-fuel cell stack measurements of transient concentration distributions Fulltext Access 8 Pages 2006
Estimating the early household market for light-duty hydrogen-fuel-cell vehicles and other “Mobile Energy” innovations in California: A constraints analysis Fulltext Access 8 Pages 2006
The influence of catalyst layer morphology on the electrochemical performance of DMFC anode Fulltext Access 8 Pages 2006
Parametric study of a novel cathode catalyst layer in proton exchange membrane fuel cells Fulltext Access 8 Pages 2006
Preparation of NiO-YSZ/YSZ bi-layers for solid oxide fuel cells by electrophoretic deposition Fulltext Access 8 Pages 2006
Performance of direct methanol fuel cell using carbon nanotube-supported Pt–Ru anode catalyst with controlled composition Fulltext Access 8 Pages 2006
Enhanced electrocatalytic performance for methanol oxidation of a novel Pt-dispersed poly(3,4-ethylenedioxythiophene)–poly(styrene sulfonic acid) electrode Fulltext Access 8 Pages 2006
Ba0.5Sr0.5Co0.8Fe0.2O3−δ as a cathode for IT-SOFCs with a GDC interlayer Fulltext Access 8 Pages 2006
EIS-in situ characterization of anodic films on antimony and lead–antimony alloys Fulltext Access 8 Pages 2006
Engineering aspects and hardware verification of a volume producable solid oxide fuel cell stack design for diesel auxiliary power units Fulltext Access 8 Pages 2006
Analysis of dynamic requirements for fuel cell systems for vehicle applications Fulltext Access 8 Pages 2006
Dynamic investigation of PEFC stacks in interaction with the air supply system Fulltext Access 8 Pages 2006
Low temperature operation and influence parameters on the cold start ability of portable PEMFCs Fulltext Access 8 Pages 2006
Dynamic fuel cell models and their application in hardware in the loop simulation Fulltext Access 8 Pages 2006
Effect of ammonia on the performance of polymer electrolyte membrane fuel cells Fulltext Access 8 Pages 2006
Modeling of the heat transfer in a portable PEFC system within MATLAB-Simulink Fulltext Access 8 Pages 2006
In situ STM studies of zinc in aqueous solutions containing PEG DiAcid inhibitor: Correlation with electrochemical performances of zinc–air fuel cells Fulltext Access 8 Pages 2006
Studies of the current and potential distributions on lead-acid batteries Fulltext Access 8 Pages 2006
Effect of solvents on the characteristics of Nafion®/PTFE composite membranes for fuel cell applications Fulltext Access 8 Pages 2006
Effects of ball-milling on lithium insertion into multi-walled carbon nanotubes synthesized by thermal chemical vapour deposition Fulltext Access 8 Pages 2006
Operation of ceria-electrolyte solid oxide fuel cells on iso-octane–air fuel mixtures Fulltext Access 8 Pages 2006
Electrical behaviour of glass–ceramics in the systems RO–BaO–SiO2 (R = Mg, Zn) for sealing SOFCs Fulltext Access 8 Pages 2006
Overview of the development of CO-tolerant anode electrocatalysts for proton-exchange membrane fuel cells Fulltext Access 8 Pages 2006
Studies on Co-based catalysts supported on modified carbon substrates for PEMFC cathodes Fulltext Access 8 Pages 2006
Numerical study of an internal-reforming solid oxide fuel cell and adsorption chiller co-generation system Fulltext Access 8 Pages 2006
X-ray diffraction and impedance spectroscopy studies of lithium manganese oxide spinel Fulltext Access 8 Pages 2006
Key challenges and recent progress in batteries, fuel cells, and hydrogen storage for clean energy systems Fulltext Access 8 Pages 2006
Photo-electrochemical hydrogen generation using band-gap modified nanotubular titanium oxide in solar light Fulltext Access 8 Pages 2006
Preparation of a carbon supported Pt catalyst using an improved organic sol method and its electrocatalytic activity for methanol oxidation Fulltext Access 8 Pages 2006
A novel Nylon-6–S316L fiber compound material for injection molded PEM fuel cell bipolar plates Fulltext Access 8 Pages 2006
Spatially resolved optical measurements of water partial pressure and temperature in a PEM fuel cell under dynamic operating conditions Fulltext Access 8 Pages 2006
Corrosion behavior of 316L stainless steel and Zr75Ti25 bulk amorphous alloy in simulated PEMFC anode environment in a solution containing 12.5 ppm H2SO4 + 1.8 ppm HF at 25 and 80 °C Fulltext Access 8 Pages 2006
Performance analysis of sulfonated PPTA polymers as potential fuel cell membranes Fulltext Access 8 Pages 2006
Measurement of the interface adhesion of solid oxide fuel cells by indentation Fulltext Access 8 Pages 2006
Electrochemical properties of LiNi0.5Mn1.5O4 films prepared by spin-coating deposition Fulltext Access 8 Pages 2006
Synthesis and physicochemical properties of LiAl0.05Mn1.95O4 cathode material by the ultrasonic-assisted sol–gel method Fulltext Access 8 Pages 2006
An electromechanical transfer circuit to measure individual battery voltages in series packs Fulltext Access 8 Pages 2006
Electrodeposition synthesis and electrochemical properties of nanostructured γ-MnO2 films Fulltext Access 8 Pages 2006
Pt-, PtNi- and PtCo-supported catalysts for oxygen reduction in PEM fuel cells Fulltext Access 8 Pages 2006
Magnetic resonance imaging (MRI) of PEM dehydration and gas manifold flooding during continuous fuel cell operation Fulltext Access 8 Pages 2006
Electrochemical characterization of LaNi5−xAlx (x = 0.1–0.5) in the absence of additives Fulltext Access 8 Pages 2006
Evaluation of the electrochemical stability of graphite foams as current collectors for lead acid batteries Fulltext Access 8 Pages 2006
Hg/HgO electrode and hydrogen evolution potentials in aqueous sodium hydroxide Fulltext Access 8 Pages 2006
Experimental investigation of coupling phenomena in polymer electrolyte fuel cell stacks Fulltext Access 8 Pages 2006
Thermodynamics of SOFC efficiency and fuel utilization as functions of fuel mixtures and operating conditions Fulltext Access 8 Pages 2006
Effects of cathode humidification on the gas–liquid interface location in a PEM fuel cell Fulltext Access 8 Pages 2006
An oxidation-resistant indium tin oxide catalyst support for proton exchange membrane fuel cells Fulltext Access 8 Pages 2006
A semi empirical model of the direct methanol fuel cell. Part II. Parametric analysis Fulltext Access 8 Pages 2006
Investigation on “saw-tooth” behavior of PEM fuel cell performance during shutdown and restart cycles Fulltext Access 8 Pages 2006
Sulphonated poly(ether ether ketone) membranes for fuel cell application: Thermal and structural characterisation Fulltext Access 9 Pages 2006
Electrochemical and solid-state NMR studies on LiCoO2 coated with Al2O3 derived from carboxylate-alumoxane Fulltext Access 9 Pages 2006
Combinatorial screening of thin film electrocatalysts for a direct methanol fuel cell anode Fulltext Access 9 Pages 2006
An investigation into polypyrrole-coated 316L stainless steel as a bipolar plate material for PEM fuel cells Fulltext Access 9 Pages 2006
System modelling and integration of an intermediate temperature solid oxide fuel cell and ZEBRA battery for automotive applications Fulltext Access 9 Pages 2006
Dynamic modeling of a hybrid system of the solid oxide fuel cell and recuperative gas turbine Fulltext Access 9 Pages 2006
Performance comparison of autothermal reforming for liquid hydrocarbons, gasoline and diesel for fuel cell applications Fulltext Access 9 Pages 2006
Development of alkaline direct methanol fuel cells based on crosslinked PVA polymer membranes Fulltext Access 9 Pages 2006
Direct methanol fuel cell membranes from Nafion–polybenzimidazole blends Fulltext Access 9 Pages 2006
Effects of annealing treatment and pH on preparation of citrate-stabilized PtRu/C catalyst Fulltext Access 9 Pages 2006
Electrocatalysis of oxidation of hydrogen on platinum ordered intermetallic phases: Kinetic and mechanistic studies Fulltext Access 9 Pages 2006
A reforming system for co-generation of hydrogen and mechanical work from methanol Fulltext Access 9 Pages 2006
Optimization of key parameters in the proton exchange membrane fuel cell Fulltext Access 9 Pages 2006
Characterization of the operational parameters of a H2/air micro PEMFC with different flow fields by impedance spectroscopy Fulltext Access 9 Pages 2006
Direct formic acid fuel cell portable power system for the operation of a laptop computer Fulltext Access 9 Pages 2006
On-board removal of CO and other impurities in hydrogen for PEM fuel cell applications Fulltext Access 9 Pages 2006