A post-processing method for interlaminar normal stresses in doubly curved laminates Fulltext Access 8 Pages 2007
Performance of externally bonded GFRP sheets on concrete in tropical environments. Part II: Microstructural tests Fulltext Access 8 Pages 2007
Determining stress intensity factors of composites using crack opening displacement Fulltext Access 8 Pages 2007
Behavior of notched and unnotched [0/±30/±60/90]s GFR/EPOXY composites under static and fatigue loads Fulltext Access 8 Pages 2007
Particle swarm optimization approach for multi-objective composite box-beam design Fulltext Access 8 Pages 2007
Effect of thickness on buckling of perfect cross-ply rings under external pressure Fulltext Access 8 Pages 2007
Experimental study of FRP-strengthened RC bridge girders subjected to fatigue loading Fulltext Access 8 Pages 2007
Transverse impact behavior and energy absorption of three-dimensional orthogonal hybrid woven composites Fulltext Access 8 Pages 2007
Numerical and experimental studies on the deformational behavior a composite train carbody of the Korean tilting train Fulltext Access 8 Pages 2007
A simple method to calculate the crack growth life of adhesively repaired aluminum panels Fulltext Access 8 Pages 2007
New iteration fractal branch and bound method for stacking sequence optimizations of multiple laminates Fulltext Access 8 Pages 2007
The influence of polymer fillers in a grease lubricant on the tribological performance of friction nodes operating under mixed friction conditions Fulltext Access 8 Pages 2007
The role of trustworthiness in the formation and governance of construction alliances Fulltext Access 8 Pages 2007
Effect of water/cement ratio on the fresh and hardened properties of self-compacting concrete Fulltext Access 8 Pages 2007
Evaluation of coupled outdoor and indoor thermal comfort environment and anthropogenic heat Fulltext Access 8 Pages 2007
Thermal buckling response of all-edge clamped rectangular plates with symmetric angle-ply lamination Fulltext Access 8 Pages 2007
Extraction and tensile properties of natural fibers: Vakka, date and bamboo Fulltext Access 8 Pages 2007
Analysis of sandwich TPS panel with functionally graded foam core by Galerkin method Fulltext Access 8 Pages 2007
Application of eigenvalue perturbation theory for detecting small structural damage using dynamic responses Fulltext Access 8 Pages 2007
Evolution of the eye-end design of a composite leaf spring for heavy axle loads Fulltext Access 8 Pages 2007
Rapid simulation of impacts on composite sandwich panels inducing barely visible damage Fulltext Access 8 Pages 2007
Elastic–viscoplastic behavior of plain-woven GFRP laminates: Homogenization using a reduced domain of analysis Fulltext Access 8 Pages 2007
Dynamic behavior of a finite crack in functionally graded materials subjected to plane incident time-harmonic stress wave Fulltext Access 8 Pages 2007
Fatigue behavior of integrally fabricated joints between titanium matrix composite and titanium alloy Fulltext Access 8 Pages 2007
Failure mode investigation of sandwich beams with functionally graded core Fulltext Access 8 Pages 2007
Development of a user-friendly expert system for composite laminate design Fulltext Access 8 Pages 2007
Development of a pultruded FRP composite material ROPS for farm tractors Fulltext Access 8 Pages 2007
Development of an expert system for evaluation of the strength of matrix shape memory composites Fulltext Access 8 Pages 2007
Computation of stress intensity factors (KI, KII) and T-stress for cracks reinforced by composite patching Fulltext Access 8 Pages 2007
Dynamic focusing-effect of piezoelectric fibers subjected to radial impact Fulltext Access 8 Pages 2007
Imperfection sensitivity in the nonlinear vibration of initially stresses functionally graded plates Fulltext Access 8 Pages 2007
Full-scale evaluations on heat resistance of glass panes incorporated with water film or sprinkler in a room fire Fulltext Access 8 Pages 2007
Ventilation effectiveness measures based on heat removal: Part 1. Definitions Fulltext Access 8 Pages 2007
On the transition from displacement to mixing ventilation with a localized heat source Fulltext Access 8 Pages 2007
Evaluation of performance characteristics of the heavy vehicle simulator in Florida Fulltext Access 8 Pages 2007
Evaluation of three test methods in determination of formaldehyde emission from particleboard bonded with different mole ratio in the urea–formaldehyde resin Fulltext Access 8 Pages 2007
The effect of the wind speed velocity on the stack pressure in medium-rise buildings in cold region of China Fulltext Access 8 Pages 2007
Approach to the quantification of the sustainable value in industrial buildings Fulltext Access 8 Pages 2007
Perceived crowding in a café/restaurant with different seating densities Fulltext Access 8 Pages 2007
Optimization of indoor climate conditioning with passive and active methods using GA and CFD Fulltext Access 8 Pages 2007
A study of construction mediator tactics—Part II: The contingent use of tactics Fulltext Access 8 Pages 2007
Modeling of cooking-emitted particle dispersion and deposition in a residential flat: A real room application Fulltext Access 8 Pages 2007
Characterization of minienvironments in a clean room: Design characteristics and environmental performance Fulltext Access 8 Pages 2007
Evaluation of professional choice of sampling locations for indoor air quality assessment Fulltext Access 8 Pages 2007
Deformation behaviour of low carbon deep-drawing steels influenced by phase transformation Fulltext Access 8 Pages 2007
Polyurethane coating for protecting concrete floors using the system with fillers produced by recycling Fulltext Access 8 Pages 2007
The impact of compression with oscillatory torsion on the structure change in copper Fulltext Access 8 Pages 2007
Selection of the most suitable method to split the resistance increment into components related to individual propellers of double-ended ferry Fulltext Access 8 Pages 2007
Investigation on the flexural behaviour of high-performance reinforced concrete beams using sandstone aggregates Fulltext Access 8 Pages 2007
Properties of low-formaldehyde-emission particleboard made from recycled wood-waste chips sprayed with PMDI/PF resin Fulltext Access 8 Pages 2007
Estimation of total equivalent temperature difference values for multilayer walls and flat roofs by using periodic solution Fulltext Access 8 Pages 2007
Lightweight concrete made from oil palm shell (OPS): Structural bond and durability properties Fulltext Access 8 Pages 2007
Sorption of VOCs on material surfaces as the deciding factor when choosing a ventilation strategy Fulltext Access 8 Pages 2007
Prediction of temperature rise near condensing units in the confined space of a high-rise building Fulltext Access 8 Pages 2007
An approach to investigate and remedy thermal-comfort problems in buildings Fulltext Access 8 Pages 2007
Energy and environmental comparison of three variants of a family house during its whole life span Fulltext Access 8 Pages 2007
Impact of cyclic wetting–drying on swelling behavior of lime-stabilized soil Fulltext Access 8 Pages 2007
Neutral temperature in subtropical climates—A field survey in air-conditioned offices Fulltext Access 8 Pages 2007
Influence of plastic electrical outlet boxes on sound insulation of gypsum board walls Fulltext Access 8 Pages 2007
Design of variable stiffness composite panels for maximum fundamental frequency using lamination parameters Fulltext Access 9 Pages 2007
Nonlinear dynamic response of piezoelastic laminated plates considering damage effects Fulltext Access 9 Pages 2007
Shape memory effect and mechanical properties of carbon nanotube/shape memory polymer nanocomposites Fulltext Access 9 Pages 2007
Flexural stiffness characterization of fiber reinforced plastic (FRP) pultruded beams Fulltext Access 9 Pages 2007
Initiation and progression of composite patch debonding in adhesively repaired cracked metallic sheets Fulltext Access 9 Pages 2007
Comparison of the effectiveness of boron/epoxy and graphite/epoxy patches for repaired cracks emanating from a semicircular notch edge Fulltext Access 9 Pages 2007
Strength design of composite beam using gradient and particle swarm optimization Fulltext Access 9 Pages 2007
Free vibration of laminated composite conical shells with random material properties Fulltext Access 9 Pages 2007
Effect of double constraints on the optimization of two-component armor systems Fulltext Access 9 Pages 2007
An energy-based fatigue damage parameter for off-axis unidirectional FRP composites Fulltext Access 9 Pages 2007
Closed-form analysis of the buckling loads of symmetrically laminated orthotropic plates considering elastic edge restraints Fulltext Access 9 Pages 2007
The low velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites Fulltext Access 9 Pages 2007