Effect of weaving processes on compressive behavior of 3D woven composites Fulltext Access 11 Pages 2007
Investigation of impact behaviour of aluminium based SiC particle reinforced metal–matrix composites Fulltext Access 11 Pages 2007
The stress corrosion cracking behavior of austenitic stainless steels in boiling magnesium chloride solutions Fulltext Access 12 Pages 2007
Effect of austenite instability on the hydrogen-enhanced crack growth of austenitic stainless steels Fulltext Access 12 Pages 2007
Effect of the marine environment on reinforced concrete durability in Iberoamerican countries: DURACON project/CYTED Fulltext Access 12 Pages 2007
Mode I interlaminar fracture behavior and mechanical properties of CFRPs with nanoclay-filled epoxy matrix Fulltext Access 12 Pages 2007
Nonlinear constant fatigue life diagrams for carbon/epoxy laminates at room temperature Fulltext Access 12 Pages 2007
Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part II: Experimental results Fulltext Access 12 Pages 2007
Particle deposition mechanisms during processing of advanced composite materials Fulltext Access 12 Pages 2007
Modeling of post-fire stiffness of E-glass fiber-reinforced polyester composites Fulltext Access 12 Pages 2007
A multi-segment injection line and real-time adaptive, model-based controller for vacuum assisted resin transfer molding Fulltext Access 12 Pages 2007
Mechanical and fracture properties of cellulose-fibre-reinforced epoxy laminates Fulltext Access 12 Pages 2007
Sources of variability in uncured aerospace grade unidirectional carbon fibre epoxy preimpregnate Fulltext Access 12 Pages 2007
An experimental investigation into the tensile strength scaling of notched composites Fulltext Access 12 Pages 2007
A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models Fulltext Access 12 Pages 2007
Three-dimensional stress analysis and Weibull statistics based strength prediction in open hole composites Fulltext Access 12 Pages 2007
Combined effect of the nature of the filler and the compatibilizer on the weld line properties of filled blends Fulltext Access 12 Pages 2007
Impact of transient chemistry on the corrosion potential of a steam turbine disc steel Fulltext Access 12 Pages 2007
Semiconductor TiO2-Ga2O3 thin film gas sensors derived from particulate sol-gel route Fulltext Access 12 Pages 2007
Microstructural and corrosive interactions in phosphorus ion implanted 304L stainless steel—II. Alterations in corrosion resistance by implantation Fulltext Access 12 Pages 2007
Composition and structure of coloured oxide films on stainless steel formed by triangular current scan and cathodic hardening treatment Fulltext Access 12 Pages 2007
Influence of pH on the passivation behavior of 254SMO stainless steel in 3.5% NaCl solution Fulltext Access 12 Pages 2007
Electrochemical corrosion behaviour of microcrystalline aluminium in acidic solutions Fulltext Access 12 Pages 2007
A comparison of hydrogen embrittlement susceptibility of two austenitic stainless steel welds Fulltext Access 12 Pages 2007
SVET and SECM imaging of cathodic protection of aluminium by a Mg-rich coating Fulltext Access 12 Pages 2007
Corrosion performance of steel coated with co-polyamides and polyaniline Fulltext Access 12 Pages 2007
Emeraldine base as corrosion protective layer on aluminium alloy AA5182, effect of the surface microstructure Fulltext Access 12 Pages 2007
Dissolution of Ti wires in sulphuric acid and hydrochloric acid solutions Fulltext Access 12 Pages 2007
Validity of dynamic electrochemical impedance spectra of some amine corrosion inhibitors in petroleum/water corrosive mixtures by Kramers–Kronig transformation Fulltext Access 12 Pages 2007
Polypyrrole electrodeposited on copper from an aqueous phosphate solution: Corrosion protection properties Fulltext Access 12 Pages 2007
Ellipsometry of passive oxide films on nickel in acidic sulfate solution Fulltext Access 12 Pages 2007
Electrochemical behaviour of Cu-40Zn in 3% NaCl solution polluted by sulphides: Effect of aminotriazole Fulltext Access 12 Pages 2007
Taxonomy for protective ability of rust layer using its composition formed on weathering steel bridge Fulltext Access 12 Pages 2007
Surface characteristics and corrosion behavior of Ti–Al–Zr alloy implanted with Al and Nb Fulltext Access 12 Pages 2007
Stress corrosion cracking mechanism of prestressing steels in bicarbonate solutions Fulltext Access 12 Pages 2007
Investigation of the HCl (g) attack on pre-oxidized pure Fe, Cr, Ni and commercial 304 steel at 400 °C Fulltext Access 12 Pages 2007
Preparation and oxidation resistance of a crack-free Al diffusion coating on Ti22Al26Nb Fulltext Access 12 Pages 2007
Torque transmission capability of composite–metal interference fit joints Fulltext Access 12 Pages 2007
Stability of the face layer of sandwich beams with sub-interface damage in the foam core Fulltext Access 12 Pages 2007
Integrated development of CFRP structures for a topless high performance vehicle Fulltext Access 12 Pages 2007
Low-velocity impact response of carbon/epoxy laminates subjected to cold–dry and cold–moist conditioning Fulltext Access 12 Pages 2007
Experimental validation of vibration-based damage detection for static laminated composite shells partially filled with fluid Fulltext Access 12 Pages 2007
Analysis of RC beams strengthened with mechanically fastened FRP (MF-FRP) strips Fulltext Access 12 Pages 2007
Nonlinear vibration of an initially stressed laminated plate according to a higher-order theory Fulltext Access 12 Pages 2007
Thermo-mechanics of undamaged and damaged multilayered composite plates: a sub-laminates finite element approach Fulltext Access 12 Pages 2007
An experimental study of pultruded glass fibre reinforced plastics channel columns at elevated temperatures Fulltext Access 12 Pages 2007
Performance of externally bonded GFRP sheets on concrete in tropical environments. Part I: Structural scale tests Fulltext Access 12 Pages 2007
A numerical study on the axial crushing response of hybrid pultruded and ±45° braided tubes Fulltext Access 12 Pages 2007
Repair evaluation of concrete cracks using surface and through-transmission wave measurements Fulltext Access 12 Pages 2007
Experimental and numerical evaluation of the mechanical behaviour of GFRP sandwich panels Fulltext Access 12 Pages 2007
An enhanced global–local higher-order theory for the free edge effect in laminates Fulltext Access 12 Pages 2007
Thermal buckling of cross-ply laminated composite shallow shells according to a global higher-order deformation theory Fulltext Access 12 Pages 2007
Criteria for punching failure mode in RC slabs reinforced by externally bonded CFRP Fulltext Access 12 Pages 2007
A strain-rate dependent 3-D micromechanical model for finite element simulations of plain weave composite structures Fulltext Access 12 Pages 2007
Buckling optimization of laminated cylindrical panels subjected to axial compressive load Fulltext Access 12 Pages 2007
Weakening effects of internal part-through elliptic holes in homogeneous and laminated composite plates Fulltext Access 12 Pages 2007
Augmented higher order global–local theory and refined triangular element for laminated composite plates Fulltext Access 12 Pages 2007
Investigation of the carbonation front shape on cementitious materials: Effects of the chemical kinetics Fulltext Access 12 Pages 2007
Studies on lignocellulosic fibers of Brazil. Part II: Morphology and properties of Brazilian coconut fibers Fulltext Access 12 Pages 2007
Kenaf natural fiber reinforced polypropylene composites: A discussion on manufacturing problems and solutions Fulltext Access 12 Pages 2007
Degradation mechanisms of magnesia-carbon refractories by high-alumina stainless steel slags under vacuum Fulltext Access 12 Pages 2007
Influence of gel-derived nanocrystalline spinel in a high alumina castable: Part 2 Fulltext Access 12 Pages 2007
Modeling of the link between microstructure and effective diffusivity of cement pastes using a simplified composite model Fulltext Access 12 Pages 2007
Technological and environmental behavior of sewage sludge ash (SSA) in cement-based materials Fulltext Access 12 Pages 2007
Comparative study of methods used to estimate ionic diffusion coefficients using migration tests Fulltext Access 12 Pages 2007
The nanogranular behavior of C-S-H at elevated temperatures (up to 700 °C) Fulltext Access 12 Pages 2007
Enhanced thermodynamic analysis coupled with temperature-dependent microstructures of cement hydrates Fulltext Access 12 Pages 2007
Tribological consequences of rubber composition and structure – case studies Fulltext Access 12 Pages 2007
De-icing salt scaling resistance of mechanically loaded engineered cementitious composites Fulltext Access 12 Pages 2007
Effect of shrinkage-reducing admixtures on the properties of alkali-activated slag mortars and pastes Fulltext Access 12 Pages 2007
Chemical interactions between siliceous aggregates and low-Ca alkali-activated cements Fulltext Access 12 Pages 2007
Microstructural evolution of cemented paste backfill: Mercury intrusion porosimetry test results Fulltext Access 12 Pages 2007
Composition, morphology and nanostructure of C–S–H in white Portland cement pastes hydrated at 55 °C Fulltext Access 12 Pages 2007
A review of the hardened mechanical properties of self-compacting concrete Fulltext Access 12 Pages 2007
Punching shear strength of interior concrete slab–column connections reinforced with steel fibers Fulltext Access 12 Pages 2007
A review on durability properties of strain hardening fibre reinforced cementitious composites (SHFRCC) Fulltext Access 12 Pages 2007
Mechanics of hollow concrete block masonry prisms under compression: Review and prospects Fulltext Access 12 Pages 2007
Effects of the molecular architecture of comb-shaped superplasticizers on their performance in cementitious systems Fulltext Access 12 Pages 2007