Prediction of the functional properties of ceramic materials from composition using artificial neural networks Fulltext Access 11 Pages 2007
Densification during hot-pressing of carbon nanotube–metal–magnesium aluminate spinel nanocomposites Fulltext Access 11 Pages 2007
High-temperature hot-pressing of titanium carbide–graphite hetero-modulus ceramics Fulltext Access 11 Pages 2007
Using confocal scanning laser microscopy for the in situ study of high-temperature behaviour of complex ceramic materials Fulltext Access 11 Pages 2007
High temperature oxidation behaviour of a TiAl–Al2O3 intermetallic matrix composite Fulltext Access 11 Pages 2007
Pitting and alkaline dissolution of an amorphous–nanocrystalline alloy with solute-lean nanocrystals Fulltext Access 11 Pages 2007
Corrosion inhibition of mild steel in acidic medium by some sulfa drugs compounds Fulltext Access 11 Pages 2007
Analysis of electrochemical noise obtained from pure aluminium in neutral chloride and alkaline solutions Fulltext Access 11 Pages 2007
Characterization and perspective of stress corrosion cracking of austenitic stainless steels (type 304 and type 316) in acid solutions using constant load method Fulltext Access 11 Pages 2007
Synthesis, densification and electrical properties of strontium cerate ceramics Fulltext Access 11 Pages 2007
Stability, validity, and sensitivity to input parameters of the slip-dissolution model for stress-corrosion cracking Fulltext Access 11 Pages 2007
Stress generated porosity in anodic alumina formed in sulphuric acid electrolyte Fulltext Access 11 Pages 2007
Oxidation of a quaternary three-phase Cu-20Ni-20Cr-5Fe alloy at 700-900 °C in 1 atm of pure O2 Fulltext Access 11 Pages 2007
Effect of rapid solidification on the microstructure and corrosion behaviour of Al–Zn–Mg based material Fulltext Access 11 Pages 2007
On-line corrosion monitoring in geothermal district heating systems. II. Localized corrosion Fulltext Access 11 Pages 2007
The effect of counter anions on corrosion resistance of steel covered by bi-layered polypyrrole film Fulltext Access 11 Pages 2007
Electrochemical stability of anodic titanium oxide films grown at potentials higher than 3 V in a simulated physiological solution Fulltext Access 11 Pages 2007
Effects of inorganic additions on the performance of manganese-based conversion treatments Fulltext Access 11 Pages 2007
Substitution of the constant phase element by Warburg impedance for protective coatings Fulltext Access 11 Pages 2007
Chromium and yttrium-doped magnesium aluminum oxides prepared from layered double hydroxides Fulltext Access 11 Pages 2007
Grain to grain slip activity in plastically deformed Zr determined by X-ray micro-diffraction line profile analysis Fulltext Access 11 Pages 2007
Heterogeneous nucleation on potent spherical substrates during solidification Fulltext Access 11 Pages 2007
Measurement and prediction of residual stresses and crystallographic texture development in rolled Zircaloy-4 plates: X-ray diffraction and the self-consistent model Fulltext Access 11 Pages 2007
Effect of microporosity on the tensile properties of AZ91 magnesium alloy Fulltext Access 11 Pages 2007
Redox behavior and transport properties of La0.5−2xCexSr0.5+xFeO3−δ and La0.5−2ySr0.5+2yFe1−yNbyO3−δ perovskites Fulltext Access 11 Pages 2007
Flame synthesis of TiO2 nanoparticles with high photocatalytic activity Fulltext Access 11 Pages 2007
Structural, magnetic and Mössbauer spectroscopic investigations of the magnetoelectric relaxor Pb(Fe0.6W0.2Nb0.2)O3 Fulltext Access 11 Pages 2007
Solvothermal syntheses, high- and low-temperature crystal structures, and thermochromic behavior of [1,2-diethyl-3,4,5-trimethyl-pyrazolium]4[Bi4I16] and [1,10-phenanthrolinium][BiI4]·(H2O) Fulltext Access 11 Pages 2007
Solid-state spreading of oxides: Morphology and conductivity of In2O3-based films Fulltext Access 11 Pages 2007
Synthesis, crystal structure, cationic mobility, thermal evolution and spectroscopic study of Cs8(UO2)4(WO4)4(WO5)2 containing infinite uranyl tungstate chains Fulltext Access 11 Pages 2007
Supported Pd-perovskite catalyst for CNG engines' exhaust gas treatment Fulltext Access 11 Pages 2007
Thermoelectric properties of perovskites: Sign change of the Seebeck coefficient and high temperature properties Fulltext Access 11 Pages 2007
Influence of composition and thermal treatment on the properties of Cu2+xTa4O12+δ Fulltext Access 11 Pages 2007
Perovskite thin films deposited by pulsed laser ablation as model systems for electrochemical applications Fulltext Access 11 Pages 2007
Metastable microheterogeneity of melts in eutectic and monotectic systems and its influence on the properties of the solidified alloy Fulltext Access 11 Pages 2007
Magnetic nanostructures in liquid and amorphous materials as probed by small angle neutron scattering Fulltext Access 11 Pages 2007
Nanoscaled BaTiO3 powders with a large surface area synthesized by precipitation from aqueous solutions: Preparation, characterization and sintering Fulltext Access 11 Pages 2007
On the surface morphology of solution annealed Co1âxO-MgO-Effects of directional dislocation exposure and Co1âxO condensation Fulltext Access 11 Pages 2007
A finite element simulation and experimental validation of a composite bolted joint loaded in bending and torsion Fulltext Access 11 Pages 2007
Microstructure, tensile and fatigue properties of AA6061/20 vol.%Al2O3p friction stir welded joints Fulltext Access 11 Pages 2007
Damage and residual strength of laminated carbon–epoxy composite circular plates loaded at the centre Fulltext Access 11 Pages 2007
Nanosized-hybrid colloids of poly(acrylic acid)/titania prepared via in situ sol–gel reaction Fulltext Access 11 Pages 2007
Molecular dynamics modeling of the structure, dynamics and energetics of mineral–water interfaces: Application to cement materials Fulltext Access 11 Pages 2007
Measurement methods of carbonation profiles in concrete: Thermogravimetry, chemical analysis and gammadensimetry Fulltext Access 11 Pages 2007
Structure and phase investigations on crystallization of 11 Å tobermorite in lime sand pellets Fulltext Access 11 Pages 2007
Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment Fulltext Access 11 Pages 2007
Compression creep rupture behavior of a glass/vinyl ester composite subject to isothermal and one-sided heat flux conditions Fulltext Access 11 Pages 2007
Effects of carbonation on the pore structure of non-hydraulic lime mortars Fulltext Access 11 Pages 2007
A test method for measuring chloride diffusion coefficients through partially saturated concrete. Part II: The instantaneous plane source diffusion case with chloride binding consideration Fulltext Access 11 Pages 2007
Damage evolution analysis in mortar, during compressive loading using acoustic emission and X-ray tomography: Effects of the sand/cement ratio Fulltext Access 11 Pages 2007
A method for measuring transient thermal diffusivity in hydrating Portland cement mortars using an oscillating boundary temperature Fulltext Access 11 Pages 2007
Synthesis of cement based CaO–Al2O3–SiO2–H2O (CASH) hydroceramics at 200 and 250 °C: Ex-situ and in-situ diffraction Fulltext Access 11 Pages 2007
Quantitative analysis of the microstructure of interfaces in steel reinforced concrete Fulltext Access 11 Pages 2007
Petrographic and mechanical aspects of accelerated ageing of polymeric mortars Fulltext Access 11 Pages 2007
Effect of specimen size on flexural compressive strength of reinforced concrete members Fulltext Access 11 Pages 2007
Bond and failure mechanisms of textile reinforced concrete (TRC) under uniaxial tensile loading Fulltext Access 11 Pages 2007
Electrical conductivity based characterization of plain and coarse glass powder modified cement pastes Fulltext Access 11 Pages 2007
Nucleation of corrosion pits in Ringer’s solution containing bovine serum Fulltext Access 11 Pages 2007
A study on mechanism of corrosion protection of polyaniline coating and its failure Fulltext Access 11 Pages 2007
Explanation of the effect of high chloride concentration on the critical pitting temperature of stainless steel Fulltext Access 11 Pages 2007
Effect of α-Al/Al3Ni microstructure on the corrosion behaviour of Al–5.4 wt% Ni alloy fabricated by equal-channel angular pressing Fulltext Access 11 Pages 2007
Thermoelastic analysis of the asymmetries of interfacial embedded delamination characteristics in laminated FRP composites Fulltext Access 11 Pages 2007
A simple mechanistic model to predict the macroscopic response of fibreglass–aluminium laminates under low-velocity impact Fulltext Access 11 Pages 2007
Identification of the local stiffness reduction of a damaged composite plate using the virtual fields method Fulltext Access 11 Pages 2007
Thermoelastic evaluation of composite laminates using digital imaging processing Fulltext Access 11 Pages 2007
Constitutive modeling of woven composites considering asymmetric/anisotropic, rate dependent, and nonlinear behavior Fulltext Access 11 Pages 2007
Numerical prediction and experimental characterisation of meso-scale-voids in liquid composite moulding Fulltext Access 11 Pages 2007
Morphology, dynamic mechanical and thermal studies on poly(styrene-co-acrylonitrile) modified epoxy resin/glass fibre composites Fulltext Access 11 Pages 2007
Influence of paste volume on shrinkage cracking and fracture properties of self-compacting concrete Fulltext Access 11 Pages 2007
The crack development on the micro- and mesoscopic scale during the pyrolysis of carbon fibre reinforced plastics to carbon/carbon composites Fulltext Access 11 Pages 2007
Simulation and experimental validation of flow flooding chamber method of resin delivery in liquid composite molding Fulltext Access 11 Pages 2007
Electrically conductive polymer nanocomposites of polymethylmethacrylate and carbon nanofibers prepared by chaotic mixing Fulltext Access 11 Pages 2007
Chemical and physical modifications of rice husks for use as composite panels Fulltext Access 11 Pages 2007
Flexural behavior of a hybrid FRP and lightweight concrete sandwich bridge deck Fulltext Access 11 Pages 2007
Computational and experimental analysis of particulate distribution during Al–SiC MMC fabrication Fulltext Access 11 Pages 2007
Treatment of functionalized graphitic nanofibers (GNFs) and the adhesion of GNFs-reinforced-epoxy with ultra high molecular weight polyethylene fiber Fulltext Access 11 Pages 2007
Thermal expansion of carbon–epoxy laminates measured with embedded FBGS – Comparison with other experimental techniques and numerical simulation Fulltext Access 11 Pages 2007
Structural biocomposites from flax - Part II: The use of PEG and PVA as interfacial compatibilising agents Fulltext Access 11 Pages 2007
Mechanical properties and fracture behavior of injection and compression molded polypropylene/coal gangue powder composites with and without a polymeric coupling agent Fulltext Access 11 Pages 2007