Mechanisms of corrosion layer formation during zirconium immersion in a (Fe)-bearing glass melt Fulltext Access 15 Pages 2007
Effects of dithionite ion on corrosion of type 304 stainless steel in sulphuric acid solution Fulltext Access 15 Pages 2007
Microbially influenced corrosion of zinc and aluminium – Two-year subjection to influence of Aspergillus niger Fulltext Access 15 Pages 2007
1,3-Bis-diethylamino-propan-2-ol as volatile corrosion inhibitor for brass Fulltext Access 15 Pages 2007
Poly(N-methylaniline) coatings on stainless steel by electropolymerization Fulltext Access 15 Pages 2007
Schiff bases of increasing complexity as mild steel corrosion inhibitors in 2 M HCl Fulltext Access 15 Pages 2007
An energy based damage mechanics approach to modelling impact onto woven composite materials: Part II. Experimental and numerical results Fulltext Access 15 Pages 2007
Characterising wood fibre mats as reinforcements for liquid composite moulding processes Fulltext Access 15 Pages 2007
Correlation between the microstructure and the electromagnetic properties of carbonyl iron filled polymer composites Fulltext Access 15 Pages 2007
Cooling and crystallisation behaviour during vacuum-consolidation of commingled thermoplastic composites Fulltext Access 15 Pages 2007
Residual stresses in thermoplastic composites—A study of the literature—Part II: Experimental techniques Fulltext Access 15 Pages 2007
A study of damage development in a weft knitted fabric reinforced composite. Part 2: Stress-strain and early cyclic behaviour of composite laminates with realistic fabric layups Fulltext Access 15 Pages 2007
Intralaminar toughness characterisation of unbalanced hybrid plain weave laminates Fulltext Access 15 Pages 2007
Temperature effect on mild steel corrosion in acid media in presence of azoles Fulltext Access 15 Pages 2007
Primary creep in single crystal superalloys: Origins, mechanisms and effects Fulltext Access 15 Pages 2007
Recrystallization mechanisms of low stacking fault energy metals as characterized on model silver single crystals Fulltext Access 15 Pages 2007
Advanced Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite-type ceramics as oxygen selective membranes: Evaluation of the synthetic process Fulltext Access 15 Pages 2007
Synthesis and low temperature fluorination of the alkaline-earth palladates Ba2−xSrxPdO3 (x = 0–2) Fulltext Access 15 Pages 2007
Some peculiarities of nematic–isotropic liquid phase transitions in monomorphic and polymorphic mesogens Fulltext Access 15 Pages 2007
Characterization of intrazeolitic Fe3+ prepared by chemical vapor deposition of [(C5H5)Fe(CO)2]2 inside NaY and FSM-16 zeolites and their catalytic activities towards phenol hydroxylation Fulltext Access 15 Pages 2007
The thermal evolution of metakaolin geopolymers: Part 2 – Phase stability and structural development Fulltext Access 15 Pages 2007
High temperature corrosion mechanisms of certain new TiAl-based intermetallic alloys in an aggressive H2/H2O/H2S environment at 850 °C Fulltext Access 15 Pages 2007
Transgranular SCC mechanism of thermally treated alloy 600 in alkaline water containing lead Fulltext Access 15 Pages 2007
Pitting corrosion of artificially aged T6 AA2024/SiCp composites in 3.5 wt.% NaCl aqueous solution Fulltext Access 15 Pages 2007
Electrochemical effects of S accumulation on ion-implanted Alloy 22 in 1Â M NaCl solutions Fulltext Access 15 Pages 2007
Sub critical crack growth in hydrogen assisted cracking of cold drawn eutectoid steel Fulltext Access 15 Pages 2007
Steel corrosion in concrete: Determinist modeling of cathodic reaction as a function of water saturation degree Fulltext Access 15 Pages 2007
Effect of selective dissolution on fatigue crack initiation in 2205 duplex stainless steel Fulltext Access 15 Pages 2007
Corrosion behaviour of Cu–10Sn bronze in aerated NaCl aqueous media – Electrochemical investigation Fulltext Access 15 Pages 2007
A numerical model for delamination growth simulation in non-crimp fabric composites Fulltext Access 15 Pages 2007
Modeling of precipitate-free zone formed upon homogenization in a multi-component alloy Fulltext Access 15 Pages 2007
Estimating rheological properties of cement pastes using various rheological models for different test geometry, gap and surface friction Fulltext Access 15 Pages 2007
Measuring elastoplastic properties of thin films on an elastic substrate using sharp indentation Fulltext Access 15 Pages 2007
Determination of the stress field in textured duplex steel using the TOF neutron diffraction method Fulltext Access 15 Pages 2007
Substitutional diffusion and Kirkendall effect in binary crystalline solids containing discrete vacancy sources and sinks Fulltext Access 15 Pages 2007
Micro-mechanical modeling of machining of FRP composites – Cutting force analysis Fulltext Access 15 Pages 2007
Effects of nonlinear viscoelastic behaviour and loading rate on transverse cracking in CFRP laminates Fulltext Access 15 Pages 2007
Elastic constants estimation of stitched NCF CFRP laminates based on a finite element unit-cell model Fulltext Access 15 Pages 2007
The effect of stitch distribution on Mode I delamination toughness of stitched laminated composites – experimental results and FEA simulation Fulltext Access 15 Pages 2007
Multiscale modeling of solid propellants: From particle packing to failure Fulltext Access 15 Pages 2007
Group velocity and characteristic wave curves of Lamb waves in composites: Modeling and experiments Fulltext Access 15 Pages 2007
Low-energy morphology of the interface layer between austenite and twinned martensite Fulltext Access 15 Pages 2007
Nonlinear thermal bending response of FGM plates due to heat conduction Fulltext Access 15 Pages 2007
Inherent sensing and interfacial evaluation of carbon nanofiber and nanotube/epoxy composites using electrical resistance measurement and micromechanical technique Fulltext Access 15 Pages 2007
Vibration and stability of cross-ply laminated composite shallow shells subjected to in-plane stresses Fulltext Access 15 Pages 2007
Structural response of a hybrid composite-to-metal bolted connection under uniform pressure loading Fulltext Access 15 Pages 2007
Progressive damage and delamination in plain weave S-2 glass/SC-15 composites under quasi-static punch-shear loading Fulltext Access 15 Pages 2007
Postbuckling of pressure-loaded FGM hybrid cylindrical shells in thermal environments Fulltext Access 15 Pages 2007
Fourier analysis of thick cross-ply Levy type clamped doubly-curved panels Fulltext Access 15 Pages 2007
Multi-objective optimization of functionally graded thick shells for thermal loading Fulltext Access 15 Pages 2007
Experimental investigation into behaviour of CFRP composite-strengthened RC beam under cyclic loading Fulltext Access 15 Pages 2007
Mechanical properties of undoped GaAs. Part I: Yield stress measurements Fulltext Access 15 Pages 2007
Resistance of self-consolidating concrete to sulfuric acid attack with consecutive pH reduction Fulltext Access 15 Pages 2007
Cracking control of concretes modified with short AR-glass fibers at early age. Experimental results on standard concrete and SCC Fulltext Access 15 Pages 2007
Influence of impressed current on the initiation of damage in reinforced mortar due to corrosion of embedded steel Fulltext Access 15 Pages 2007
Efficacy of CFRP-based techniques for the flexural and shear strengthening of concrete beams Fulltext Access 15 Pages 2007
Virtual front tracking model for the quantitative modeling of dendritic growth in solidification of alloys Fulltext Access 15 Pages 2007
Linear analysis of texture–property relationships using process-based representations of Rodrigues space Fulltext Access 15 Pages 2007
Dissolution and interfacial reaction of Nb in contact with the molten 52In–48Sn solder Fulltext Access 15 Pages 2007
Mismatch-induced recrystallization of giant magneto-resistance (GMR) multilayer systems Fulltext Access 15 Pages 2007
Through-process simulation of texture and properties during the thermomechanical processing of aluminium sheets Fulltext Access 15 Pages 2007
Influence of a high magnetic field on columnar dendrite growth during directional solidification Fulltext Access 15 Pages 2007
In situ investigation by X-ray tomography of the overall and local microstructural changes occurring during partial remelting of an Al–15.8 wt.% Cu alloy Fulltext Access 15 Pages 2007
Influence of phase miscibility and morphology on crack resistance behaviour and kinetics of crack propagation of nanostructured binary styrene–(styrene/butadiene)–styrene triblock copolymer blends Fulltext Access 15 Pages 2007
Pore formation mechanism and characterization of porous NiTi shape memory alloys synthesized by capsule-free hot isostatic pressing Fulltext Access 15 Pages 2007
Liquid–liquid phase separation in sodium borosilicate glass: Ordering phenomena in particle arrangement Fulltext Access 16 Pages 2007
Ex-situ and in-situ X-ray diffractions of corrosion products freshly formed on the surface of an iron–silicon alloy Fulltext Access 16 Pages 2007
Corrosion properties of laser beam joints of aluminium with zinc-coated steel Fulltext Access 16 Pages 2007
Effect of Fe–Zn alloy layer on the corrosion resistance of galvanized steel in chloride containing environments Fulltext Access 16 Pages 2007
Electrochemical oxidation of binary copper–nickel alloys in cryolite melts Fulltext Access 16 Pages 2007
Oxidation behaviour of cast aluminium matrix composites with Ce surface coatings Fulltext Access 16 Pages 2007
Local structure and medium range ordering of tetrahedrally coordinated Fe3+ ions in alkali–alkaline earth–silica glasses Fulltext Access 16 Pages 2007
Effects of DBU, morpholine, and DMA on corrosion of low carbon steel exposed to steam Fulltext Access 16 Pages 2007
Corrosion of Si3N4-ceramics in aqueous solutions: Part 2. Corrosion mechanisms in acids as a function of concentration, temperature and composition Fulltext Access 16 Pages 2007
Inhibitive action of the purine and adenine for copper corrosion in sulphate solutions Fulltext Access 16 Pages 2007
Influence of silicate ions on the formation of goethite from green rust in aqueous solution Fulltext Access 16 Pages 2007
Characterisation of initial atmospheric corrosion carbon steels by field exposure and laboratory simulation Fulltext Access 16 Pages 2007