Strength optimization of “tailor-made cement” with limestone filler and blast furnace slag Fulltext Access 8 Pages 2005
Characterization of Mode I fatigue crack growth in GFRP woven laminates at low temperatures Fulltext Access 8 Pages 2005
The influence of interstitial oxygen and peak pressure on the shock loading behavior of zirconium Fulltext Access 8 Pages 2005
Viscous grain-boundary sliding and grain rotation accommodated by grain-boundary diffusion Fulltext Access 8 Pages 2005
Probing the effect of superplasticizer adsorption on the surface forces using the colloidal probe AFM technique Fulltext Access 8 Pages 2005
Pressure-induced superheating of Al nanoparticles encapsulated in Al2O3 shells without epitaxial interface Fulltext Access 8 Pages 2005
Properties of confined fibre-reinforced concrete under uniaxial compressive impact Fulltext Access 8 Pages 2005
In situ growth of lead zirconate titanate thin films by hybrid process: sol-gel method and pulsed-laser deposition Fulltext Access 8 Pages 2005
Oxidation behavior of a single phase γ-TiAl alloy in low-pressure oxygen and hydrogen Fulltext Access 8 Pages 2005
Comparison of the telephone cord delamination method for measuring interfacial adhesion with the four-point bending method Fulltext Access 8 Pages 2005
Phase mixture modeling of the strain rate dependent mechanical behavior of nanostructured materials Fulltext Access 8 Pages 2005
Application of petrography for determining the quality of concrete cured in tropical environment Fulltext Access 8 Pages 2005
Theoretical study of structural, electronic, and thermal properties of Cr2(Zr,Nb) Laves alloys Fulltext Access 8 Pages 2005
Evaluation of blends of high and low calcium fly ashes for use as supplementary cementing materials Fulltext Access 8 Pages 2005
Shear strengthening of RC deep beams using externally bonded FRP systems Fulltext Access 8 Pages 2005
Effect of aggregates and water contents on the properties of magnesium phospho-silicate cement Fulltext Access 8 Pages 2005
Thaumasite formation in limestone filler cements exposed to sodium sulphate solution at 20 °C Fulltext Access 8 Pages 2005
Studies on lithium salts to mitigate ASR-induced expansion in new concrete: a critical review Fulltext Access 8 Pages 2005
Corrosion performance of medium-strength and silica fume high-strength reinforced concrete in a chloride solution Fulltext Access 8 Pages 2005
Experimental study for the evaluation of creep in concrete through thermal measurements Fulltext Access 8 Pages 2005
Experimental study of the mechanical behavior of plastic concrete in triaxial compression Fulltext Access 8 Pages 2005
Studies on the durability of natural fibres and the effect of corroded fibres on the strength of mortar Fulltext Access 8 Pages 2005
Corrosion behaviour of reinforcing steel exposed to an amino alcohol based corrosion inhibitor Fulltext Access 8 Pages 2005
Effect of carbon fibres on the mechanical properties and corrosion levels of reinforced portland cement mortars Fulltext Access 8 Pages 2005
Greek supplementary cementing materials and their incorporation in concrete Fulltext Access 8 Pages 2005
First direct 3D visualisation of microstructural evolutions during sintering through X-ray computed microtomography Fulltext Access 8 Pages 2005
Curvature driven grain boundary migration in aluminum: molecular dynamics simulations Fulltext Access 8 Pages 2005
Apparent fracture toughness of Si3N4-based laminates with residual compressive or tensile stresses in surface layers Fulltext Access 8 Pages 2005
A second-order phase-transformation of the dislocation structure during plastic deformation determined by in situ synchrotron X-ray diffraction Fulltext Access 8 Pages 2005
On the role of the transformation eigenstrain in the growth or shrinkage of spheroidal isotropic precipitations Fulltext Access 8 Pages 2005
Ab initio theoretical tensile test on Y-doped Σ = 3 grain boundary in α-Al2O3 Fulltext Access 8 Pages 2005
A parametric study of the stress state of thermal barrier coatings Part II: cooling stresses Fulltext Access 8 Pages 2005
Local mechanical behavior and slip band formation within grains of thin sheets Fulltext Access 8 Pages 2005
Mechanical properties of Friction Stir Processed 2618/Al2O3/20p metal matrix composite Fulltext Access 9 Pages 2005
A linear finite element model to predict processing-induced distortion in FRP laminates Fulltext Access 9 Pages 2005
Deconsolidation in glass mat thermoplastic composites: Analysis of the mechanisms Fulltext Access 9 Pages 2005
Impact damage of carbon fiber polymer-matrix composites, studied by electrical resistance measurement Fulltext Access 9 Pages 2005
Thermally induced bending and wrinkling in large aspect ratio sandwich panels Fulltext Access 9 Pages 2005
Research on Cu2+ transformations of Cu and its oxides particles with different sizes in the simulated uterine solution Fulltext Access 9 Pages 2005
An improved model including plasticity for the prediction of the stress in fibres with an interface/interphase region Fulltext Access 9 Pages 2005
Approximate analytical constitutive model for non-crimp fabric composites Fulltext Access 9 Pages 2005
Theoretical and experimental investigation of stress redistribution in open hole composite laminates due to damage accumulation Fulltext Access 9 Pages 2005
Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding-part II: automation and validation Fulltext Access 9 Pages 2005
An experimental method to study the frictional processes during composites manufacturing Fulltext Access 9 Pages 2005
A study of the effect of acetylation and propionylation surface treatments on natural fibres Fulltext Access 9 Pages 2005
Mode I interlaminar fracture of woven glass/epoxy multidirectional laminates Fulltext Access 9 Pages 2005
The effect of process temperature on the formability of polypropylene based fibre-metal laminates Fulltext Access 9 Pages 2005
Influence of the strain rate on the uniaxial tensile behavior of 4-step 3D braided composites Fulltext Access 9 Pages 2005
Polypropylene/talc/SEBS (SEBS-g-MA) composites. Part 2. Mechanical properties Fulltext Access 9 Pages 2005
Study of the corrosion inhibition of carbon-steel in dilute ammoniacal media using N-ciclohexil-benzothiazole-sulphenamida Fulltext Access 9 Pages 2005
The influence of processing variables on the energy absorption of composite tubes Fulltext Access 9 Pages 2005
Formation and thermal stability of an E93-structured NiHf2 phase in Ni33Hf67 Fulltext Access 9 Pages 2005
Comparisons of corrosion rates of Ni–P based composite coatings in HCl and NaCl solutions Fulltext Access 9 Pages 2005
Tafel slopes and corrosion rates obtained in the pre-Tafel region of polarization curves Fulltext Access 9 Pages 2005
Electrochemical conditions for environment-assisted cracking of 6061 Al alloy Fulltext Access 9 Pages 2005
The initial stage of pitting corrosion on coated steels investigated by photon rupture in chloride containing solutions Fulltext Access 9 Pages 2005
Microstructures and mechanical properties of a directionally solidified NiAl-Mo eutectic alloy Fulltext Access 9 Pages 2005
An assessment of interfacial dissipation effects at reconstructive ferrite-austenite interfaces Fulltext Access 9 Pages 2005
Magnetic Barkhausen noise: the influence of microstructure and deformation in bending Fulltext Access 9 Pages 2005
Effect of site occupation on thermal and mechanical properties of ternary alloyed Mo5Si3 Fulltext Access 9 Pages 2005
Cracking and decohesion of a thin Al2O3 film on a ductile Al-5%Mg substrate Fulltext Access 9 Pages 2005
Characterization and visualization of the lattice misfit associated with dislocation cores Fulltext Access 9 Pages 2005
Microstructural descriptors and the effects of nuclei clustering on recrystallization path kinetics Fulltext Access 9 Pages 2005
Electrochemical oxidation of Mn/MnO films: formation of an electrochemical capacitor Fulltext Access 9 Pages 2005
A comparison of the mechanical behaviour of an AA1050 and a low carbon steel deformed upon strain reversal Fulltext Access 9 Pages 2005
Quantitative determination of strain fields around Ni4Ti3 precipitates in NiTi Fulltext Access 9 Pages 2005
Initiation and growth of the discontinuous precipitation reaction at [0Â 1Â 1] symmetric tilt boundaries in Cu-Be alloy bicrystals Fulltext Access 9 Pages 2005
Analytical model for the torsional response of steel fiber reinforced concrete members under pure torsion Fulltext Access 9 Pages 2005
Interface evaluations of overlay-concrete bi-layer composites by a direct shear test method Fulltext Access 9 Pages 2005
Detection or quantitative analysis of a corrosion inhibitor, the sodium monofluorophosphate, in concrete Fulltext Access 9 Pages 2005