A unified numerical approach for thermal analysis of transversely isotropic fiber-reinforced composites containing inhomogeneous interphase Fulltext Access 11 Pages 2005
Mode-I interlaminar fracture behaviour of weft-knitted fabric reinforced composites Fulltext Access 11 Pages 2005
Analysis of multi-layered composite cylinders under hygrothermal loading Fulltext Access 11 Pages 2005
The effect of hydrostatic pressure on the mechanical properties of glass fibre/epoxy unidirectional composites Fulltext Access 11 Pages 2005
The influence of fibre sizing on the strength and fracture toughness of glass fibre composites Fulltext Access 11 Pages 2005
Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites Fulltext Access 11 Pages 2005
A torque and thrust prediction model for drilling of composite materials Fulltext Access 11 Pages 2005
Effect of 2-hydroxyethyl methacrylate (HEMA) on the mechanical and thermal properties of jute-polycarbonate composite Fulltext Access 11 Pages 2005
The role of tribochemistry on fretting wear of Mg-SiC particulate composites Fulltext Access 11 Pages 2005
Fibre-matrix adhesion in glass-fibre reinforced polyamide-6 silicate nanocomposites Fulltext Access 11 Pages 2005
Investigation of the clustering behaviour of titanium diboride particles in aluminium Fulltext Access 11 Pages 2005
Impact and compression-after-impact performance of weft-knitted glass textile composites Fulltext Access 11 Pages 2005
Spark-plasma-sintered ZrO2(Y2O3)-BaCrO4 self-lubricating composites for high temperature tribological applications Fulltext Access 11 Pages 2005
Engineering properties of amorphous silica as a new natural pozzolan for use in concrete Fulltext Access 11 Pages 2005
Incorporation of zinc into calcium silicate hydrates, Part I: formation of C-S-H(I) with C/S=2/3 and its isochemical counterpart gyrolite Fulltext Access 11 Pages 2005
Influence of temperature on yield value of highly flowable micromortars made with sulfonate-based superplasticizers Fulltext Access 11 Pages 2005
The use of migrating corrosion inhibitors to repair motorways' concrete structures contaminated by chlorides Fulltext Access 11 Pages 2005
Reliability analysis for the existing reinforced concrete pile corrosion of bridge substructure Fulltext Access 11 Pages 2005
Prediction equation of drying shrinkage of concrete based on composite model Fulltext Access 11 Pages 2005
Estimation of air void and aggregate spatial distributions in concrete under uniaxial compression using computer tomography scanning Fulltext Access 11 Pages 2005
Transport characteristics of ZrO2 dispersed mixed (BaCl2)1âx-(KCl)x solid electrolytes Fulltext Access 11 Pages 2005
Ion transport properties and Seebeck coefficient of Fe-doped La(Sr)Al(Mg)O3âδ Fulltext Access 11 Pages 2005
Transport properties and thermal expansion of Ti-substituted La1âxSrxFeO3âδ (x=0.5-0.7) Fulltext Access 11 Pages 2005
Synthesis of disordered pyrochlores, A2Ti2O7 (A=Y, Gd and Dy), by mechanical milling of constituent oxides Fulltext Access 11 Pages 2005
Synthesis, structural and microstructural study of Bi4W0.5Ti0.5O8X (X=Cl, Br) Sillén-Aurivillius intergrowths Fulltext Access 11 Pages 2005
Compositionally induced phase transition in the Ca2MnGa1âxAlxO5 solid solutions: Ordering of tetrahedral chains in brownmillerite structure Fulltext Access 11 Pages 2005
Symmetry analysis of antiferroquadrupolar order and accompanying atomic displacements in CeB6 Fulltext Access 11 Pages 2005
Interpenetrating and non-interpenetrating 3-dimensional coordination polymer frameworks from multiple building blocks Fulltext Access 11 Pages 2005
Crystal chemistry of the olivine-type LixFePO4 system (0⩽x⩽1) between 25 and 370â°C Fulltext Access 11 Pages 2005
Effects of relativistic motion of electrons on the chemistry of gold and platinum Fulltext Access 11 Pages 2005
Synthesis, crystal structures and properties of the trimetaphosphimates NaBa(PO2NH)3, KSr(PO2NH)3â 4H2O, and NH4Sr(PO2NH)3â 4H2O Fulltext Access 11 Pages 2005
Structural transition at 225 K of the trinuclear Fe(III) heptanoate [Fe3O(O2CC6H13)6(H2O)3]NO3 Fulltext Access 11 Pages 2005
Lime-pozzolana mortars in Roman catacombs: composition, structures and restoration Fulltext Access 11 Pages 2005
Microstructure and mechanical properties of Al2O3-YSZ and Al2O3-YAG directionally solidified eutectic plates Fulltext Access 11 Pages 2005
Rare earth silicate environmental barrier coatings for SiC/SiC composites and Si3N4 ceramics Fulltext Access 11 Pages 2005
The beneficial effect of water vapour on the oxidation at 600 and 700 °C of a MoSi2-based composite Fulltext Access 11 Pages 2005
Oxidation protection of C/C-SiC composites by an electrophoretically deposited mullite precursor Fulltext Access 11 Pages 2005
Oxygen ionic transport in SrFe1âyAlyO3âδ and Sr1âxCaxFe0.5Al0.5O3âδ ceramics Fulltext Access 11 Pages 2005
Mechanical and microstructural characterization of calcium aluminosilicate (CAS) and SiO2/CAS composites deformed at high temperature and high pressure Fulltext Access 11 Pages 2005
Influence of dispersant structure on the rheological properties of highly-concentrated zirconia dispersions Fulltext Access 11 Pages 2005
Reinforced polymer concrete: Physical properties of the matrix and static/dynamic bond behaviour Fulltext Access 11 Pages 2005
A small fatigue crack growth relationship and its application to cast aluminum Fulltext Access 11 Pages 2005
Porous NiTi by thermal explosion mode of SHS: processing, mechanism and generation of single phase microstructure Fulltext Access 11 Pages 2005
Coarsening and grain growth in sintering of two particles of different sizes Fulltext Access 11 Pages 2005
Influence of cell wall shape and density on the mechanical behaviour of 2D foam structures Fulltext Access 11 Pages 2005
A computational model of ferroelectric domains. Part II: grain boundaries and defect pinning Fulltext Access 11 Pages 2005
Thermodynamic description and unidirectional solidification of eutectic organic alloys: IV. Binary systems neopentylglycol-succinonitrile and amino-methyl-propanediol-succinonitrile Fulltext Access 11 Pages 2005
Enhanced plasticity in a bulk amorphous matrix composite: macroscopic and microscopic viewpoint studies Fulltext Access 11 Pages 2005
Alkylaminoborazine-based precursors for the preparation of boron nitride fibers by the polymer-derived ceramics (PDCs) route Fulltext Access 11 Pages 2005
Morphological operations, planar mathematical formulations, and stereological interpretations for automated image analysis of concrete microstructure Fulltext Access 11 Pages 2005
Effect of nonlinear response of concrete on its elastic modulus and strength Fulltext Access 11 Pages 2005
Variation of strength and stiffness of fibre reinforced polymer reinforcing bars with temperature Fulltext Access 11 Pages 2005
Corrosion monitoring of nickel-containing steels in marine atmospheric environment Fulltext Access 11 Pages 2005
Control of Fe(O,OH)6 nano-network structures of rust for high atmospheric-corrosion resistance Fulltext Access 11 Pages 2005
Environmental embrittlement of automobile spring steels caused by wet–dry cyclic corrosion in sodium chloride solution Fulltext Access 11 Pages 2005
Behaviour of zinc in electropolished and etched Al–Zn alloys and effect on corrosion potential Fulltext Access 11 Pages 2005
Inhibition effects of LAB and LABS on iron corrosion in chlorine solutions at different temperatures Fulltext Access 11 Pages 2005
Natural cement as the precursor of Portland cement: Methodology for its identification Fulltext Access 11 Pages 2005
Immobilization of chromium (VI) evaluated by binding isotherms for ground granulated blast furnace slag and ordinary Portland cement Fulltext Access 11 Pages 2005
Dynamic restoration mechanisms in α-zirconium at elevated temperatures Fulltext Access 11 Pages 2005
Durability of mixtures containing calcium nitrite based corrosion inhibitor Fulltext Access 11 Pages 2005
Investigating the role of reactive silica in the hydration mechanisms of high-calcium fly ash/cement systems Fulltext Access 11 Pages 2005
A simplified isotropic damage model for concrete under bi-axial stress states Fulltext Access 11 Pages 2005
Mechanical properties of date palm fibres and concrete reinforced with date palm fibres in hot-dry climate Fulltext Access 11 Pages 2005
Thermodynamics of interfacial energy in binary metallic systems: influence of adsorption on dihedral angles Fulltext Access 11 Pages 2005
Influence of fine particles on grain coarsening within an orientation gradient Fulltext Access 11 Pages 2005
Microtexture and macrotexture formation in the containerless solidification of undercooled Ni-18.7 at.% Sn eutectic melts Fulltext Access 11 Pages 2005
Strain-induced grain refinement of cobalt during surface mechanical attrition treatment Fulltext Access 11 Pages 2005
A continuum model for the creep of single crystal nickel-base superalloys Fulltext Access 11 Pages 2005
Determination of interface integrity in high volume fraction polymer composites at all strain levels Fulltext Access 11 Pages 2005
Solid state NMR and LVSEM studies on the hardening of latex modified tile mortar systems Fulltext Access 11 Pages 2005
Partial substitution of Co and Ge for Fe and B in Fe-Zr-B-Cu alloys: microstructure and soft magnetic applicability at high temperature Fulltext Access 11 Pages 2005
A delamination mechanism for thermal barrier coatings subject to calcium-magnesium-alumino-silicate (CMAS) infiltration Fulltext Access 11 Pages 2005
Kinetic Monte Carlo simulation of clustering in an Al-Zn-Mg-Cu alloy (7050) Fulltext Access 11 Pages 2005
Ab initio thermodynamic properties of stoichiometric phases in the Ni-Al system Fulltext Access 11 Pages 2005
A phase field model for the simulation of grain growth in materials containing finely dispersed incoherent second-phase particles Fulltext Access 11 Pages 2005
Rearrangement and pore size evolution during WC-Co sintering below the eutectic temperature Fulltext Access 11 Pages 2005
Promoting exclusive α-Al2O3 growth upon high-temperature oxidation of NiCrAl alloys: experiment versus model predictions Fulltext Access 11 Pages 2005
Formation mechanism of graded composition in Al-Al2Cu functionally graded materials fabricated by a centrifugal in situ method Fulltext Access 11 Pages 2005
Peculiarities of Fe-Ni alloy crystallization and stability inside C nanotubes as derived through electron microscopy Fulltext Access 11 Pages 2005