Inhibition of stress corrosion cracking of alloy AA8090 T-8171 by addition of rare earth salts Fulltext Access 11 Pages 2005
Corrosion inhibition of brass in presence of terdentate ligands in chloride solution Fulltext Access 11 Pages 2005
Influence of dynamic straining on hydrogen embrittlement of UNS-G41300 and UNS-S31803 steels in a low H2S concentration environment Fulltext Access 11 Pages 2005
Capacitance behaviour of passive films on ferritic and austenitic stainless steel Fulltext Access 11 Pages 2005
Comprehensive model for the activation mechanism of Al-Zn alloys produced by indium Fulltext Access 11 Pages 2005
Unsaturated polyester composites reinforced with flax fibers: effect of cold plasma and autoclave treatments on mechanical and permeation properties Fulltext Access 12 Pages 2005
Improving the corrosion protection of aluminium alloys using reactive magnetron sputtering Fulltext Access 12 Pages 2005
Analysis of the vacuum infusion moulding process: I. Analytical formulation Fulltext Access 12 Pages 2005
Experimental study on the concept of liquid cooling for improving fire resistance of FRP structures for construction Fulltext Access 12 Pages 2005
The effect of filler-filler and filler-elastomer interaction on rubber reinforcement Fulltext Access 12 Pages 2005
Quality assessment of curved composite components in peel joint structures Fulltext Access 12 Pages 2005
An evaluation of the elastic properties and thermal expansion coefficients of medium and high modulus graphite fibers Fulltext Access 12 Pages 2005
Microstructure and mechanical properties of ultrafine Ti(CN)-based cermets fabricated from nano/submicron starting powders Fulltext Access 12 Pages 2005
Synthesis and sintering behaviour of spinel-type CoxNiMn2âxO4 (0.2 â¤Â x â¤Â 1.2) prepared by the ethylene glycol-metal nitrate polymerized complex process Fulltext Access 12 Pages 2005
Accelerated tests of hardened cement pastes alteration by organic acids: analysis of the pH effect Fulltext Access 12 Pages 2005
Effect of magnesium and sulfate ions on durability of silica fume blended mixes exposed to the seawater tidal zone Fulltext Access 12 Pages 2005
A study on the applicability of vibration in fresh high fluidity concrete Fulltext Access 12 Pages 2005
Effects of porosity on leaching of Ca from hardened ordinary Portland cement paste Fulltext Access 12 Pages 2005
The formation and role of ettringite in Iowa highway concrete deterioration Fulltext Access 12 Pages 2005
Numerical modeling of transport phenomena in reinforced concrete exposed to elevated temperatures Fulltext Access 12 Pages 2005
Properties of plain and latex modified Portland cement pastes and concretes with and without superplasticizer Fulltext Access 12 Pages 2005
Behavior of blended cement mortars exposed to sulfate solutions cycling in relative humidity Fulltext Access 12 Pages 2005
High-temperature oxidation of duplex stainless steels in air and mixed gas of air and CH4 Fulltext Access 12 Pages 2005
The composition of the boundary region of MnS inclusions in stainless steel and its relevance in triggering pitting corrosion Fulltext Access 12 Pages 2005
Emulation and study of the corrosion behavior of Al alloy 2024-T3 using a wire beam electrode (WBE) in conjunction with scanning vibrating electrode technique (SVET) Fulltext Access 12 Pages 2005
Corrosion and passivation mechanism of chromium diboride coatings on stainless steel Fulltext Access 12 Pages 2005
Diffusional control in the intergranular corrosion of some hcp metals in iodine alcoholic solutions Fulltext Access 12 Pages 2005
Effect of hydrogen concentration on the embrittlement of a duplex stainless steel Fulltext Access 12 Pages 2005
Potassium ethyl xanthate as corrosion inhibitor for copper in acidic chloride solutions Fulltext Access 12 Pages 2005
Corrosion and impressed current cathodic protection of copper-based materials using a bimetallic rotating cylinder electrode (BRCE) Fulltext Access 12 Pages 2005
Repassivation behaviour and surface analysis of Fe3Al based iron aluminide in 0.25 M H2SO4 Fulltext Access 12 Pages 2005
Finite element simulation of shaped ductile fiber pullout using a mixed cohesive zone/friction interface model Fulltext Access 12 Pages 2005
Oxidation properties of Zr-Nb alloys at 500-600 °C under low oxygen potentials Fulltext Access 12 Pages 2005
Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces Fulltext Access 12 Pages 2005
Polyaniline acrylic coatings for corrosion inhibition: the role played by counter-ions Fulltext Access 12 Pages 2005
Spatial distribution of copper nuclei electrodeposited on glassy carbon under galvanostatic conditions Fulltext Access 12 Pages 2005
Influence of flow on the corrosion inhibition of carbon steel by fatty amines in association with phosphonocarboxylic acid salts Fulltext Access 12 Pages 2005
Effect of HCl pre-treatment on corrosion resistance of cerium-based conversion coatings on magnesium and magnesium alloys Fulltext Access 12 Pages 2005
An analytical model for crack control in reinforced concrete elements under combined forces Fulltext Access 12 Pages 2005
Analysis of flexible bending behavior of woven preform using non-orthogonal constitutive equation Fulltext Access 12 Pages 2005
On the crushing response of composite sandwich panels subjected to edgewise compression: experimental Fulltext Access 12 Pages 2005
Dynamic stability of spinning pre-twisted sandwich beams with a constrained damping layer subjected to periodic axial loads Fulltext Access 12 Pages 2005
Analytical and numerical studies of polymer matrix composite sandwich infill panels Fulltext Access 12 Pages 2005
Vibration analysis of generally laminated composite plates by the moving least squares differential quadrature method Fulltext Access 12 Pages 2005
Integrated micro/macro-mechanical model of woven fabric composites under large deformation Fulltext Access 12 Pages 2005
Structurally graded core junctions in sandwich beams: fatigue loading conditions Fulltext Access 12 Pages 2005
Optimal laminate sequence of non-prismatic thin-walled composite spatial members of generic section Fulltext Access 12 Pages 2005
Through-thickness shape optimisation of typical double lap-joints including effects of differential thermal contraction during curing Fulltext Access 12 Pages 2005
A study on UV-curable adhesives for optical pick-up: I. Photo-initiator effects Fulltext Access 12 Pages 2005
Bond characterization between concrete substrate and repairing SFRC using pull-off testing Fulltext Access 12 Pages 2005
Suppression of deicing salt corrosion of weathering steel bridges by washing Fulltext Access 12 Pages 2005
Cathodic reduction of the duplex oxide films formed on copper in air with high relative humidity at 60 °C Fulltext Access 12 Pages 2005
In situ monitoring of electroactive species by using the scanning electrochemical microscope. Application to the investigation of degradation processes at defective coated metals Fulltext Access 12 Pages 2005
The use of Tafel back extrapolation to clarify the influence of ruthenium and palladium alloying on the corrosion behaviour of titanium in concentrated hydrochloric acid Fulltext Access 12 Pages 2005
The nanostructure and microstructure of steels: Electrochemical Tafel behaviour and atomic force microscopy Fulltext Access 12 Pages 2005
Co-inhibition characteristics of sodium tungstate with potassium iodate on mild steel corrosion Fulltext Access 12 Pages 2005
Corrosion electrochemical characteristics of red iron oxide pigmented epoxy coatings on aluminum alloys Fulltext Access 12 Pages 2005
Synthesis and characterization of iron oxide particles using spray pyrolysis technique Fulltext Access 12 Pages 2005
The kinetics of ettringite formation and dilatation in a blended cement with β-hemihydrate and anhydrite as calcium sulfate Fulltext Access 12 Pages 2005
Indentation-induced phase transformations in silicon: influences of load, rate and indenter angle on the transformation behavior Fulltext Access 12 Pages 2005
Finite element modelling of the actual structure of cellular materials determined by X-ray tomography Fulltext Access 12 Pages 2005
Evolution of pattern complexity in the Cahn-Hilliard theory of phase separation Fulltext Access 12 Pages 2005
Dynamic densification of metal matrix-coated fibre composites: modelling and processing Fulltext Access 12 Pages 2005
Elastic properties of Pd-hydrogen, Pd-deuterium, and Pd-tritium single crystals Fulltext Access 12 Pages 2005
Representation of misorientations in Rodrigues-Frank space: application to the Bain, Kurdjumov-Sachs, Nishiyama-Wassermann and Pitsch orientation relationships in the Gibeon meteorite Fulltext Access 12 Pages 2005
Role of particle size and filler-matrix adhesion on dynamic fracture of glass-filled epoxy. II. Linkage between macro- and micro-measurements Fulltext Access 12 Pages 2005
Effects of ledge density on the morphology and growth kinetics of precipitates in a Ni-Cr Alloy Fulltext Access 12 Pages 2005
Strain hardening behavior of aluminum alloyed Hadfield steel single crystals Fulltext Access 12 Pages 2005
Forced and natural carbonation of lime-based mortars with and without additives: Mineralogical and textural changes Fulltext Access 12 Pages 2005
Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model Fulltext Access 12 Pages 2005
Thermodynamic modelling of growth-restriction effects in aluminium alloys Fulltext Access 12 Pages 2005
The role of competing mechanisms in the fatigue life variability of a nearly fully-lamellar γ-TiAl based alloy Fulltext Access 12 Pages 2005
Liquid formation and microstructural evolution during re-heating and partial melting of an extruded A356 aluminium alloy Fulltext Access 12 Pages 2005
In situ investigation of liquid Ga penetration in Al bicrystal grain boundaries: grain boundary wetting or liquid metal embrittlement? Fulltext Access 12 Pages 2005
Enantiomorph identification of transition-metal disilicides with the C40 structure (the space group of P6222 and P6422) by new convergent-beam electron diffraction method Fulltext Access 12 Pages 2005
Stress analysis of pin-loaded woven-glass fiber reinforced epoxy laminate conveying chain components Fulltext Access 12 Pages 2005