Poly(ethylene oxide)/Laponite nanocomposites via melt-compounding: effect of clay modification and matrix molar mass Fulltext Access 14 Pages 2005
Physico-chemical aspects of polyethylene processing in an open mixer. Part 16: Mechanisms and kinetics of ketone formation at low temperature Fulltext Access 14 Pages 2005
Study of the synthesis of graft copolymers by a reactive process. Influence of the copolymer structure on the adhesion of polypropylene onto poly(vinylidene fluoride) Fulltext Access 14 Pages 2005
Reactive processing of polymers: Functionalisation of ethylene-propylene diene terpolymer (EPDM) in the presence and absence of a co-agent and effect of functionalised EPDM on compatibilisation of poly(ethylene terephthalate)/EPDM blends Fulltext Access 14 Pages 2005
Development of a unified framework for calculating molecular weight distribution in diffusion controlled free radical bulk homo-polymerization Fulltext Access 14 Pages 2005
Enthalpy relaxation studies in polymethyl methacrylate networks with different crosslinking degrees Fulltext Access 14 Pages 2005
Confined crystallization phenomena in immiscible polymer blends with dispersed micro- and nanometer sized PA6 droplets, part 2: reactively compatibilized PS/PA6 and (PPE/PS)/PA6 blends Fulltext Access 14 Pages 2005
Confined crystallization phenomena in immiscible polymer blends with dispersed micro - and nanometer sized PA6 droplets, part 1: uncompatibilized PS/PA6, (PPE/PS)/PA6 and PPE/PA6 blends Fulltext Access 14 Pages 2005
Chromatographic fingerprinting - a tool for classification and for predicting the degradation state of degradable polyethylene Fulltext Access 14 Pages 2005
The influence of cure conditions on the morphology and phase distribution in a rubber-modified epoxy resin using scanning electron microscopy and atomic force microscopy Fulltext Access 14 Pages 2005
Adsorption of a weakly charged polymer on an oppositely charged colloidal particle: Monte Carlo simulations investigation Fulltext Access 14 Pages 2005
The effect of the polymerization route on the amount of interphase in structured latex particles and their corresponding films Fulltext Access 14 Pages 2005
A round robin study for the characterization of latex particle morphology-multiple analytical techniques to probe specific structural features Fulltext Access 14 Pages 2005
Reactively compatibilised polyamide6/ethylene-co-vinyl acetate blends: mechanical properties and morphology Fulltext Access 14 Pages 2005
Influence of copolymerisation on fracture behaviour of aliphatic polyketones Fulltext Access 14 Pages 2005
Stochastic simulation of thin photoresist film dissolution: a dynamic and a quasi-static dissolution algorithm for the simulation of surface and line-edge roughness formation Fulltext Access 14 Pages 2005
Finite-volume modeling and hybrid-cycle performance of planar and tubular solid oxide fuel cells Fulltext Access 14 Pages 2005
Synthesis, spectroscopic characterization, crystal, molecular and electronic structure of the [{ReOBr2(pyz)2}2(μ-O)] and [{ReOBr2}2(μ-O)(μ-pyd)2] complexes Fulltext Access 14 Pages 2005
Cation templation of Mn2+/[Mo(CN)7]4â system: Formation of pseudo-dimorphs (NH4)2Mn3(H2O)4[Mo(CN)7]2 · nH2O (n = 4, 5) Fulltext Access 14 Pages 2005
Recent advances in the design and construction of helical coordination polymers Fulltext Access 14 Pages 2005
Ex situ NMR and neutron diffraction study of structure and lithium motion in Li7MnN4 Fulltext Access 14 Pages 2005
Characterization and quantification of uncertainty in solid oxide fuel cell hybrid power plants Fulltext Access 14 Pages 2005
Simulation of flow and transport phenomena in a polymer electrolyte fuel cell under low-humidity operation Fulltext Access 14 Pages 2005
Model for the contamination of fuel cell anode catalyst in the presence of fuel stream impurities Fulltext Access 14 Pages 2005
Reliability and cost-benefits of adding alternate power sources to an independent micro-grid community Fulltext Access 14 Pages 2005
The atomistic simulation of the gas permeability of poly(organophosphazenes). Part 2. Poly[bis(2,2,2-trifluoroethoxy)phosphazene] Fulltext Access 14 Pages 2005
Influence of shear flow on the preparation of polymer layered silicate nanocomposites Fulltext Access 14 Pages 2005
Hydroxyl terminated poly(ether ether ketone) with pendent methyl group toughened epoxy resin: miscibility, morphology and mechanical properties Fulltext Access 14 Pages 2005
Dielectric function of ionic conductors studied by impedance spectroscopy Fulltext Access 14 Pages 2005
Synthesis of thermoplastic polyurethane nanocomposites of reactive nanoclay by bulk polymerization methods Fulltext Access 14 Pages 2005
Thermodynamic, morphological, mechanical and fracture properties of poly(methyl methacrylate)(PMMA) modified divinylester(DVE)/styrene(St) thermosets Fulltext Access 14 Pages 2005
Rheological and mechanical comparative study of in situ polymerized and melt-blended nylon 6 nanocomposites Fulltext Access 14 Pages 2005
The use of bimodal blends of vinyl ester monomers to improve resin processing and toughen polymer properties Fulltext Access 14 Pages 2005
Structure-property relations of poly(propylene oxide) block copolymers with monodisperse and polydisperse crystallisable segments Fulltext Access 14 Pages 2005
Synthesis, thermal properties, and specific interactions of high Tg increase in poly(2,6-dimethyl-1,4-phenylene oxide)-block-polystyrene copolymers Fulltext Access 14 Pages 2005
Design of novel poly(methyl vinyl ether) containing AB and ABC block copolymers by the dual initiator strategy Fulltext Access 14 Pages 2005
Synthesis and characterization of temperature and pH-responsive pentablock copolymers Fulltext Access 14 Pages 2005
Mesoglobules of thermoresponsive polymers in dilute aqueous solutions above the LCST Fulltext Access 14 Pages 2005
Computationally designed monomers and polymers for molecular imprinting of theophylline-part II Fulltext Access 14 Pages 2005
Evolution of lamellar orientation and crystalline texture of various polyethylenes and ethylene-based copolymers in plane-strain compression Fulltext Access 14 Pages 2005
Effect of in situ prepared silica nano-particles on non-isothermal crystallization of polypropylene Fulltext Access 14 Pages 2005
Methods to improve the properties of polymer mixtures: optimizing intermolecular interactions and compatibilization Fulltext Access 14 Pages 2005
Polyelectrolyte-functionalized multiwalled carbon nanotubes: preparation, characterization and layer-by-layer self-assembly Fulltext Access 14 Pages 2005
Reorganization and improvement of bulk polymers by processing with their cyclodextrin inclusion compounds Fulltext Access 14 Pages 2005
Influence of Pb++ ions on the dissolution and passivation of nickel and Ni–21Cr in acidic solutions Fulltext Access 15 Pages 2005
Enthalpy of dilution of [SO2 + salt + H2O] in [salt + H2O] {salt = (NH4)2SO4 or Na2SO4}: Experimental results and modeling Fulltext Access 15 Pages 2005
Carburization of 310 stainless steel exposed at 800–1100 °C in 2%CH4/H2 gas mixture Fulltext Access 15 Pages 2005
Atmospheric corrosion in subtropical areas: influences of time of wetness and deficiency of the ISO 9223 norm Fulltext Access 15 Pages 2005
Vehicle-to-grid power implementation: From stabilizing the grid to supporting large-scale renewable energy Fulltext Access 15 Pages 2005
Modeling electro-mechanical properties of layered electrets: application of the finite-element method Fulltext Access 15 Pages 2005
Particle tracking and particle-wall collision in a wire-plate electrostatic precipitator Fulltext Access 15 Pages 2005
Influence of reinforcement proportion and matrix composition on pitting corrosion behaviour of cast aluminium matrix composites (A3xx.x/SiCp) Fulltext Access 15 Pages 2005
Role of second phases in the stress corrosion cracking of a nickel–aluminium bronze in saline water Fulltext Access 15 Pages 2005
EIS characterisation of anodic films formed on 2024 aluminium alloy, in sulphuric acid containing molybdate or permanganate species Fulltext Access 15 Pages 2005
Localized attack of copper and brass in tap water: the effect of Pseudomonas Fulltext Access 15 Pages 2005
Heat treatment effect on the corrosion behaviour of black passivated ZnNi alloys Fulltext Access 15 Pages 2005
Inhibition of steel corrosion by calcium benzoate adsorption in nitrate solutions Fulltext Access 15 Pages 2005
Morphological analysis and classification of types of surface corrosion damage by digital image processing Fulltext Access 15 Pages 2005
Solubility behavior of ternary systems of lipids, cosolvents and supercritical carbon dioxide and processing aspects Fulltext Access 15 Pages 2005
Supercritical hydrogenolysis of fatty acid methyl esters: Phase equilibrium measurements on selected binary and ternary systems Fulltext Access 15 Pages 2005
Combined influence of natural organic matter (NOM) and colloidal particles on nanofiltration membrane fouling Fulltext Access 15 Pages 2005
Impact of different spacer filament geometries on concentration polarization control in narrow membrane channel Fulltext Access 15 Pages 2005
Heat-treatment effect on the morphology and pervaporation performances of asymmetric PAN hollow fiber membranes Fulltext Access 15 Pages 2005
Modelling of cross-flow membrane contactors: Mass transfer with chemical reactions Fulltext Access 15 Pages 2005
Monte Carlo simulation of colloidal membrane filtration: Model development with application to characterization of colloid phase transition Fulltext Access 15 Pages 2005
Effect of polymer nature and hydrodynamic conditions on a process of polymer enhanced ultrafiltration Fulltext Access 15 Pages 2005
A new computational approach for SOFC impedance from detailed electrochemical reaction-diffusion models Fulltext Access 15 Pages 2005
Recent development of non-platinum catalysts for oxygen reduction reaction Fulltext Access 15 Pages 2005
Water behavior in serpentine micro-channel for proton exchange membrane fuel cell cathode Fulltext Access 15 Pages 2005
Behaviour of various glass-ceramic sealants with ferritic steels under simulated SOFC stack conditions Fulltext Access 15 Pages 2005
The evaluation of the repassivation tendency of Cr-Mn and Cr-Ni steels using scratch technique Fulltext Access 15 Pages 2005
Solid acid membranes for high temperature (¿140° C) proton exchange membrane fuel cells Fulltext Access 15 Pages 2005
Reliability modeling and assessment of grid-connected PEM fuel cell power plants Fulltext Access 15 Pages 2005
Integrated thermal engineering analyses with heat transfer at periphery of planar solid oxide fuel cell Fulltext Access 15 Pages 2005