A new multiscale modeling approach for the prediction of mechanical properties of polymer-based nanomaterials Fulltext Access 14 Pages 2006
Effect of compatibilisers on mechanical and thermal properties of bentonite filled polypropylene composites Fulltext Access 14 Pages 2006
Physico-chemical aspects of polyethylene processing in an open mixer. Part 23: Mechanisms and kinetics of trans-vinylene group consumption Fulltext Access 14 Pages 2006
Structural and physico-chemical studies on modification of polypropylene and its polyphenolic antioxidant by electron beam irradiation Fulltext Access 14 Pages 2006
Evaluation of polymers for conservation treatments of outdoor exposed stone monuments. Part I: Photo-oxidative weathering Fulltext Access 14 Pages 2006
Physico-chemical aspects of polyethylene processing in an open mixer. Part 24: Experimental kinetics of aldehyde and carboxylic acid formation Fulltext Access 14 Pages 2006
Stabilization of γ-sterilized biomedical polyolefins by synergistic mixtures of oligomeric stabilizers Fulltext Access 14 Pages 2006
Polyisobutene/polystyrene interpenetrating polymer networks: Effects of network formation order and composition on the IPN architecture Fulltext Access 15 Pages 2006
Morphology and mechanical properties of polyamide 12/polypropylene blends in presence and absence of reactive compatibiliser Fulltext Access 15 Pages 2006
Comparison of fracture behavior of nylon 6 versus an amorphous polyamide toughened with maleated poly(ethylene-1-octene) elastomers Fulltext Access 15 Pages 2006
Monomer addition programs to generate constant gradient block copolymers Fulltext Access 15 Pages 2006
A model of charge transport and electromechanical transduction in ionic liquid-swollen Nafion membranes Fulltext Access 15 Pages 2006
Morphological alteration and strength of polyamide 6 subjected to high plane-strain compression Fulltext Access 15 Pages 2006
Procedures for interface residual stress determination using neutron diffraction: Mo-coated steel gear wheel Fulltext Access 15 Pages 2006
Perturbed angular correlations for Gd in gadolinium: In-beam comparisons of relative magnetizations Fulltext Access 15 Pages 2006
Excitation functions of proton induced nuclear reactions on natural tungsten up to 34 MeV Fulltext Access 15 Pages 2006
On the optimization of operating pressure for a nuclear pumped laser excited by 3He(n, p)3H reaction products Fulltext Access 15 Pages 2006
Texture evolution in Copper film at high temperature studied in situ by electron back-scatter diffraction Fulltext Access 15 Pages 2006
Effect of stored elastic energy on phase content of ion assisted deposited boron nitride films Fulltext Access 15 Pages 2006
Mechanical and tribological properties of electrolytic hard chrome and HVOF-sprayed coatings Fulltext Access 15 Pages 2006
Ground surface improvement of the austenitic stainless steel AISI 304 using cryogenic cooling Fulltext Access 15 Pages 2006
Photoinduced electron transfer-catalyzed processes of sulfoamino perylene diimide under concentrated sun light Fulltext Access 15 Pages 2006
Material PropertiesDynamic vulcanization of natural rubber/high-density polyethylene blends: Effect of compatibilization, blend ratio and curing system Fulltext Access 15 Pages 2006
Physical-morphological and chemical changes leading to an increase in adhesion between plasma treated polyester fibres and a rubber matrix Fulltext Access 15 Pages 2006
Chemical reaction of sputtered Cu film with PI modified by low energy reactive atomic beam Fulltext Access 15 Pages 2006
Benzene adsorption on carbonaceous materials: The influence of pore structure on the state of the adsorbate Fulltext Access 15 Pages 2006
Preparation, physico-chemical characterization, analytical applications and electrical conductivity measurement studies of an 'organic-inorganic' composite cation-exchanger: Polyaniline Sn(IV) phosphate Fulltext Access 15 Pages 2006
Entropically driven ring-opening metathesis polymerization (ED-ROMP) of macrocyclic olefin-containing oligoamides Fulltext Access 15 Pages 2006
Facile synthesis of branched water-soluble poly(dimethylacrylamide)s in conventional and parallel reactors using free radical polymerisation Fulltext Access 15 Pages 2006
Suberin: A promising renewable resource for novel macromolecular materials Fulltext Access 15 Pages 2006
Microstructural features, diffusion and molecular relaxations in polyimide/silica hybrids Fulltext Access 15 Pages 2006
Material PropertiesReactive processing of anionic polyamide-6 for application in fiber composites: A comparitive study with melt processed polyamides and nanocomposites Fulltext Access 15 Pages 2006
Spatial resolution of degradation in stabilized polystyrene and polypropylene plaques exposed to accelerated photodegradation or heat aging Fulltext Access 15 Pages 2006
Thermal stability and degradation behavior of novel wholly aromatic azopolyamide-hydrazides Fulltext Access 15 Pages 2006
Review ArticleStandardization and certification in the area of environmentally degradable plastics Fulltext Access 15 Pages 2006
Physico-chemical aspects of polyethylene processing in an open mixer. Part 17. Effect of oxygen availability Fulltext Access 15 Pages 2006
An FGM coated elastic solid under thermomechanical loading: a two dimensional linear elastic approach Fulltext Access 15 Pages 2006
Preparation of interconnected poly(ε-caprolactone) porous scaffolds by a combination of polymer and salt particulate leaching Fulltext Access 15 Pages 2006
Elastomer particle morphology in ternary blends of maleated and non-maleated ethylene-based elastomers with polyamides: Role of elastomer phase miscibility Fulltext Access 15 Pages 2006
Blown films of nanocomposites prepared from low density polyethylene and a sodium ionomer of poly(ethylene-co-methacrylic acid) Fulltext Access 15 Pages 2006
Lifetimes of organic photovoltaics: Using TOF-SIMS and 18O2 isotopic labelling to characterise chemical degradation mechanisms Fulltext Access 15 Pages 2006
Numerical and experimental investigation of the relative erosion severity between plugged tees and elbows in dilute gas/solid two-phase flow Fulltext Access 15 Pages 2006
Insights into the chemical behavior of zinc dialkyldithiophosphate anti-wear additives in their isomeric and decomposed forms through molecular simulation Fulltext Access 15 Pages 2006
Friction, wear and material transfer of sintered polyimides sliding against various steel and diamond-like carbon coated surfaces Fulltext Access 15 Pages 2006
Studies of high temperature sliding wear of metallic dissimilar interfaces II: Incoloy MA956 versus Stellite 6 Fulltext Access 15 Pages 2006
Tribological analysis of fracture conditions in thin surface coatings by 3D FEM modelling and stress simulations Fulltext Access 15 Pages 2006
Behavior of (1 1 1) grains during the thermal treatment of copper film studied in situ by electron back-scatter diffraction Fulltext Access 15 Pages 2006
Fatigue life of reinforced concrete beams under bending strengthened with composite materials Fulltext Access 15 Pages 2006
Computational prediction of erosion of air heater elements by fly ash particles Fulltext Access 15 Pages 2006
Performance evaluation of photovoltaic thermal solar air collector for composite climate of India Fulltext Access 15 Pages 2006
The effect of pre-thermal treatment of TiO2 nano-particles on the performances of dye-sensitized solar cells Fulltext Access 15 Pages 2006
Charge transfer resistance of spray deposited and compressed counter electrodes for dye-sensitized nanoparticle solar cells on plastic substrates Fulltext Access 15 Pages 2006
Structural studies on the microcrystallization of Si:H network developed by hot-wire CVD Fulltext Access 15 Pages 2006
Review of photoluminescence performance of nano-sized semiconductor materials and its relationships with photocatalytic activity Fulltext Access 15 Pages 2006
Thickness dependence of ZnO:In thin films doped with different indium compounds and deposited by chemical spray Fulltext Access 15 Pages 2006
A complementary electrochromic device based on polyaniline and poly(3,4-ethylenedioxythiophene) Fulltext Access 15 Pages 2006
An all-thiophene electrochromic device fabricated with poly(3-methylthiophene) and poly(3,4-ethylenedioxythiophene) Fulltext Access 15 Pages 2006
Design procedure for cooling ducts to minimise efficiency loss due to temperature rise in PV arrays Fulltext Access 15 Pages 2006
Influence of three-dimensional cloud effects on satellite derived solar irradiance estimation—First approaches to improve the Heliosat method Fulltext Access 15 Pages 2006
An efficient stereoselective preparation of cis-perfluoroalkenylzinc reagents [(E)-RFCFCFZnCl] by the metallation of 1H,1H-perfluoroalkanes and their derivatization to cis-1-arylperfluoroalkenes [(Z)-RFCFCFAr] Fulltext Access 15 Pages 2006
Experimental–numerical studies of transverse impact response of adhesively bonded lap joints in composite structures Fulltext Access 15 Pages 2006
Drying of latex films and coatings: Reconsidering the fundamental mechanisms Fulltext Access 15 Pages 2006
Phase field simulations of early stage structure formation during immersion precipitation of polymeric membranes in 2D and 3D Fulltext Access 15 Pages 2006
Effect of copolymer type and composition on separation characteristics of pervaporation membranes—A case study with separation of acetone–water mixtures Fulltext Access 15 Pages 2006
Performance of treated and untreated asymmetric polysulfone hollow fiber membrane in series and cascade module configurations for CO2/CH4 gas separation system Fulltext Access 15 Pages 2006
Visualisation of fouling during microfiltration of natural brown water by using wavelets of ultrasonic spectra Fulltext Access 15 Pages 2006
Process and equipment design for membrane-based extraction: Basic considerations Fulltext Access 15 Pages 2006
Characterization of membrane distillation modules and analysis of mass flux enhancement by channel spacers Fulltext Access 15 Pages 2006
Irreversible thermodynamics and overall mass transport in ion-exchange membrane electrodialysis Fulltext Access 15 Pages 2006
Preparation and characterization of composite palladium membranes on sinter-metal supports with a ceramic barrier against intermetallic diffusion Fulltext Access 15 Pages 2006
Post-lens tear-film depletion due to evaporative dehydration of a soft contact lens Fulltext Access 15 Pages 2006
Progression of wear in the mild wear regime of an Al-18.5% Si (A390) alloy Fulltext Access 15 Pages 2006
Pervaporation and related properties of time-dependent growth layers of zeolite NaA on structured ceramic supports Fulltext Access 15 Pages 2006
Dynamics and control of recombination process at semiconductor surfaces, interfaces and nano-structures Fulltext Access 16 Pages 2006
A computational analysis of the ballistic performance of light-weight hybrid composite armors Fulltext Access 16 Pages 2006
Electrochemical and XPS studies of decylamides of α-amino acids adsorption on carbon steel in acidic environment Fulltext Access 16 Pages 2006
Splat morphology and spreading behavior due to oblique impact of droplets onto substrates in plasma spray coating process Fulltext Access 16 Pages 2006
Effects of Clâ, NO3â and SO42â anions on the anodic behavior of carbon steel in deaerated 0.50 M NaHCO3 solutions Fulltext Access 16 Pages 2006
Non-concentrating and asymmetric compound parabolic concentrating building façade integrated photovoltaics: An experimental comparison Fulltext Access 16 Pages 2006
Impact of probing volume from different mechanical measurement methods on elastic properties of thermally sprayed Ni-based coatings on a mesoscopic scale Fulltext Access 16 Pages 2006
Glass-alumina composite coatings by plasma spraying. Part I: Microstructural and mechanical characterization Fulltext Access 16 Pages 2006