A low symmetry structure of isotactic poly(4-methyl-pentene-1), Form II. An illustration of the impact of chain folding on polymer crystal structure and unit-cell symmetry Fulltext Access 16 Pages 2006
Developing FEM models for difficult to describe 3D structures by using STL files – the case study of the human femur modelling Fulltext Access 16 Pages 2006
Assessment of ultimate bearing capacity of RC sections affected by mineral oil Fulltext Access 16 Pages 2006
Gas permeation in poly(ether imide) nanocomposite membranes based on surface-treated silica. Part 1: Without chemical coupling to matrix Fulltext Access 16 Pages 2006
A structure-based constitutive equation for filler-reinforced rubber-like networks and for the description of the Mullins effect Fulltext Access 16 Pages 2006
Large-scale friction and wear tests on a hybrid UHMWPE-pad/primer coating combination used as bearing element in an extremely high-loaded ball-joint Fulltext Access 16 Pages 2006
Molecular changes on drawing isotopic blends of polyethylene and ethylene copolymers. Part 2. MCIRS studies Fulltext Access 16 Pages 2006
Study of leakage and friction of flexible seals for steady motion via a numerical approximation method Fulltext Access 16 Pages 2006
Softening and melting mechanisms of polyamides interfering with sliding stability under adhesive conditions Fulltext Access 16 Pages 2006
An overview of the potential of quantitative coating adhesion measurement by scratch testing Fulltext Access 16 Pages 2006
Effect of high temperature on the characterization of fretting wear regimes at Ti6Al4V interfaces Fulltext Access 16 Pages 2006
Synthesis, characterization and liquid-crystal-aligning properties of novel aromatic polypyromellitimides bearing (n-alkyloxy)biphenyloxy side chains Fulltext Access 16 Pages 2006
e-Induced secondary electron emission yield of insulators and charging effects Fulltext Access 16 Pages 2006
Activation cross-sections on cadmium: Proton induced nuclear reactions up to 80 MeV Fulltext Access 16 Pages 2006
Impact of different spacer filaments geometries on 2D unsteady hydrodynamics and concentration polarization in spiral wound membrane channel Fulltext Access 16 Pages 2006
Condition monitoring methods applied to degradation of chlorosulfonated polyethylene cable jacketing materials Fulltext Access 16 Pages 2006
Heck-type 5-endo-trig cyclizations promoted by vinylic fluorines: Ring-fluorinated indene and 3H-pyrrole syntheses from 1,1-difluoro-1-alkenes Fulltext Access 16 Pages 2006
Photovoltaic activity of a PolyProDOT derivative in a bulk heterojunction solar cell Fulltext Access 16 Pages 2006
Extremely facile ring inversion and rearrangement in fluorobicyclo[2.1.0]pentanes Fulltext Access 16 Pages 2006
Hypervelocity impact resistance of reinforced carbon-carbon/carbon-foam thermal protection systems Fulltext Access 16 Pages 2006
Metal-containing polyurethanes, poly(urethane-urea)s and poly(urethane-ether)s: A review Fulltext Access 16 Pages 2006
Effect of citric acid on properties of CeO2 films for electrochromic windows Fulltext Access 16 Pages 2006
Product PerformanceDeformation of reinforced polymer bearing elements on full-scale compressive strength and creep tests under yielding conditions Fulltext Access 16 Pages 2006
Comparison of 1D and 3D analysis of the front contact influence on GaAs concentrator solar cell performance Fulltext Access 16 Pages 2006
The very strong solid Lewis acids aluminium chlorofluoride (ACF) and bromofluoride (ABF)—Synthesis, structure, and Lewis acidity Fulltext Access 16 Pages 2006
The effect of crashworthiness parameters on the behaviour of car-body elements Fulltext Access 16 Pages 2006
Lifetimes of organic photovoltaics: Design and synthesis of single oligomer molecules in order to study chemical degradation mechanisms Fulltext Access 16 Pages 2006
Dye-sensitized solar cells based on semiconductor morphologies with ZnO nanowires Fulltext Access 16 Pages 2006
Photovoltaic properties and technological aspects of In1−xGaxN/Si, Ge (0<x<0.6) heterojunction solar cells Fulltext Access 16 Pages 2006
Analysis and modelling the reverse characteristic of photovoltaic cells Fulltext Access 16 Pages 2006
Formation and characterization of asymmetric nanofiltration membrane: Effect of shear rate and polymer concentration Fulltext Access 16 Pages 2006
Novel carbazole phenoxy-based methacrylates to produce high-refractive index polymers Fulltext Access 16 Pages 2006
Methodology for optimal sizing of stand-alone photovoltaic/wind-generator systems using genetic algorithms Fulltext Access 17 Pages 2006
Control scheme for direct steam generation in parabolic troughs under recirculation operation mode Fulltext Access 17 Pages 2006
The effect of multilayer filtered arc coatings on mechanical properties, corrosion resistance and performance of periodontal dental instruments Fulltext Access 17 Pages 2006
Tribological contact analysis of a rigid ball sliding on a hard coated surface Fulltext Access 17 Pages 2006
Interaction of cyclodextrins with side chains of water soluble polymers: A simple model for biological molecular recognition and its utilization for stimuli-responsive systems Fulltext Access 17 Pages 2006
Influence of composition and annealing on the structure development in biaxially stretched PEN/PEI/PEEK ternary blends Fulltext Access 17 Pages 2006
Fluorine in medicinal chemistry: Recent therapeutic applications of fluorinated small molecules Fulltext Access 17 Pages 2006
A comparison of poly(ether imide)s from diamines with 2-aminophenoxy or 4-aminophenoxy units: Synthesis, characterization and properties Fulltext Access 17 Pages 2006
Physico-chemical aspects of polyethylene processing in an open mixer. Part 26: Formal kinetics of aldehyde and carboxylic acid formation at a constant rate Fulltext Access 17 Pages 2006
Mechanical behaviour of biodegradable agricultural films under real field conditions Fulltext Access 17 Pages 2006
Hydrolytic stability and hydrolysis reaction mechanism of bis(2,4-di-tert-butyl)pentaerythritol diphosphite (Alkanox P-24) Fulltext Access 17 Pages 2006
Surface morphology of metal films deposited on mica at various temperatures observed by atomic force microscopy Fulltext Access 17 Pages 2006
Nonideality of Au/Si and Au/GaAs Schottky barriers due to process-induced defects Fulltext Access 17 Pages 2006
Electrochromic organic and polymeric materials for display applications Fulltext Access 17 Pages 2006
Structural and spectroelectrochemical (UV–vis and IR) studies of nanocrystalline sol–gel derived TiO2 films Fulltext Access 17 Pages 2006
Cycling and at-rest stabilities of a complementary electrochromic device containing poly(3,4-ethylenedioxythiophene) and Prussian blue Fulltext Access 17 Pages 2006
Photo-induced charge separation and electron diffusion in MDMO–PPV:PCBM bulk heterojunctions Fulltext Access 17 Pages 2006
Description of crack propagation – theoretical approach and fitting accuracy to measurement results Fulltext Access 17 Pages 2006
The possibility of adjusting concrete mixtures' fluidity by means of superplasticizer SNF Fulltext Access 17 Pages 2006
Low-friction wear-resistant coatings for high-temperature foil bearings Fulltext Access 17 Pages 2006
1-N-alkyl -3-methylimidazolium ionic liquids as neat lubricants and lubricant additives in steel-aluminium contacts Fulltext Access 17 Pages 2006
On the simultaneous optimization of pressure and layout for gas permeation membrane systems Fulltext Access 17 Pages 2006
Transport and structural characteristics of crosslinked poly(ethylene oxide) rubbers Fulltext Access 17 Pages 2006
Electrical and photovoltaic response of bulk hetero-junction device made from poly (3-phenyl azo methine thiophene) (PPAT) and 1, 1′-diallyl substituted 4, 4′-dipyridine (DADP) Fulltext Access 17 Pages 2006
Application of thin film composite membranes to the membrane aromatic recovery system Fulltext Access 17 Pages 2006
Performance of natural gas membranes in the presence of heavy hydrocarbons Fulltext Access 17 Pages 2006
Physico-chemical aspects of polyethylene processing in an open mixer. Part 22: Mechanisms and kinetics of vinyl and vinylidene group consumption Fulltext Access 18 Pages 2006
Physico-chemical aspects of polyethylene processing in an open mixer. Part 18: Mechanisms and kinetics of trans-vinylene group formation Fulltext Access 18 Pages 2006
Metallocene ethylene-1-octene copolymers: Influence of comonomer content on thermo-mechanical, rheological, and thermo-oxidative behaviours before and after melt processing in an internal mixer Fulltext Access 18 Pages 2006
Effect of humidity on structure and electrochromic properties of sol–gel-derived tungsten oxide films Fulltext Access 18 Pages 2006
High temperature annealing of sprayed SnO2: F layers in a silicon solar cell process with screen-printed contacts Fulltext Access 18 Pages 2006
The synthesis of novel 3-substituted polypyrroles bearing crown-ether moieties and a study of their electrochemical properties Fulltext Access 18 Pages 2006
A review: Non-cross-linked polystyrene bound reagents, catalysts and syntheses Fulltext Access 18 Pages 2006
New succinamic acids, -γ-lactones, and -succinimides from (3-perfluoroalkyl-2-iodoalkyl)succinic acid anhydrides and amines : Highly surface active amphiphiles Fulltext Access 18 Pages 2006
Surface phenomena related to mirror degradation in extreme ultraviolet (EUV) lithography Fulltext Access 18 Pages 2006
Near-maximum-power-point-operation (nMPPO) design of photovoltaic power generation system Fulltext Access 18 Pages 2006
Nanotribological properties of perfluoropolyether-coated magnetic disk evaluated by vertical and lateral vibration wear tests Fulltext Access 18 Pages 2006
Mechanical analysis of the scratching of metals and polymers with conical indenters at moderate and large strains Fulltext Access 18 Pages 2006
Influence of oxides on friction in hot rolling: Experimental investigations and tribological modelling Fulltext Access 19 Pages 2006
Physical properties of poly(n-alkyl acrylate) copolymers. Part 1. Crystalline/crystalline combinations Fulltext Access 19 Pages 2006
A general kinetic method to predict sequence length distributions for non-linear irreversible multicomponent polymerizations Fulltext Access 19 Pages 2006
In vitro frictional behavior and wear patterns between contemporary and aesthetic composite orthodontic brackets and archwires Fulltext Access 19 Pages 2006
Luminescent layers for enhanced silicon solar cell performance: Down-conversion Fulltext Access 19 Pages 2006
On the sensitivity of open-circuit voltage and fill factor on dangling bond density and Fermi level position in amorphous silicon p–i–n solar cell Fulltext Access 19 Pages 2006
Prediction of hybrid ventilation performance using two simulation tools Fulltext Access 19 Pages 2006