Processes involved in charging of discharged lead-acid battery electrodes by pulse methods: I. Qualitative analysis for flat negative electrodes Fulltext Access 7 Pages 2006
Synthesis and characterization of Nd0.6Sr0.4Co1−yMnyO3−δ (0 ≤ y ≤ 1.0) cathodes for intermediate temperature solid oxide fuel cells Fulltext Access 7 Pages 2006
Application of Pt + RuO2 catalysts prepared by thermal decomposition of polymeric precursors to DMFC Fulltext Access 7 Pages 2006
Development and field experience of monitoring system for valve-regulated lead–acid batteries in stationary applications Fulltext Access 7 Pages 2006
SureCure®—A new material to reduces curing time and improve curing reproducibility of lead–acid batteries Fulltext Access 7 Pages 2006
New low-antimony alloy for straps and cycling service in lead–acid batteries Fulltext Access 7 Pages 2006
Development of additives in negative active-material to suppress sulfation during high-rate partial-state-of-charge operation of lead–acid batteries Fulltext Access 7 Pages 2006
Study of transport of oxygen and water vapour between cells in valve regulated lead-acid batteries Fulltext Access 7 Pages 2006
Corrosion of low-antimony lead–cadmium alloys in conditions of long-term polarization Fulltext Access 7 Pages 2006
Effects of substrate morphology and ageing on cycle performance of a Sn-anode fabricated by electroplating Fulltext Access 7 Pages 2006
Effect of chitosan on stabilization of acetates-containing solution: A novel precursor for LiMn2O4 film deposition Fulltext Access 7 Pages 2006
The preparation and electrochemical performance of solid solutions LiCoO2–Li2MnO3 as cathode materials for lithium ion batteries Fulltext Access 7 Pages 2006
Influence of nickel content on the chemical bonding character of LiMn2−xNixO4 spinel oxides Fulltext Access 7 Pages 2006
A strategy of estimating fuel concentration in a direct liquid-feed fuel cell system Fulltext Access 7 Pages 2006
Transient behavior of CO poisoning of the anode catalyst layer of a PEM fuel cell Fulltext Access 7 Pages 2006
Electron-beam reduction method for preparing electrocatalytic particles for membrane electrode assemblies (MEA) Fulltext Access 7 Pages 2006
Performance of a poly(2,5-benzimidazole) membrane based high temperature PEM fuel cell in the presence of carbon monoxide Fulltext Access 7 Pages 2006
Analysis of membraneless fuel cell using laminar flow in a Y-shaped microchannel Fulltext Access 7 Pages 2006
Oxidation kinetics and phase evolution of a Fe–16Cr alloy in simulated SOFC cathode atmosphere Fulltext Access 7 Pages 2006
Evaluation of GPE performances in lithium metal battery technology by means of simple polarization tests Fulltext Access 7 Pages 2006
Kinetic study on low-temperature synthesis of LiFePO4 via solid-state reaction Fulltext Access 7 Pages 2006
Preparation and characterization of high-density spherical Li0.97Cr0.01FePO4/C cathode material for lithium ion batteries Fulltext Access 7 Pages 2006
Comparison of conversion and deposit formation of ethanol and butane under SOFC conditions Fulltext Access 7 Pages 2006
Matching of critical parameters in a small non-pressurized non-humidified PEMFC stack Fulltext Access 7 Pages 2006
Innovative design to improve the power density of a solid oxide fuel cell Fulltext Access 7 Pages 2006
Performance characteristics of a MW-class SOFC/GT hybrid system based on a commercially available gas turbine Fulltext Access 7 Pages 2006
Electrochemical supercapacitor behavior of nanoparticulate rutile-type Ru1−xVxO2 Fulltext Access 7 Pages 2006
Gas-phase mass-transfer resistance at PEMFC electrodes: Part 2. Effects of the flow geometry and the related pressure field Fulltext Access 7 Pages 2006
Organic–inorganic composites based on room temperature ionic liquid and 12-phosphotungstic acid salt with high assistant catalysis and proton conductivity Fulltext Access 7 Pages 2006
Interpretation of the interconnected microstructure of an NiO-YSZ anode composite for solid oxide fuel cells via impedance spectroscopy Fulltext Access 7 Pages 2006
Direct ethanol fuel cell (DEFC): Electrical performances and reaction products distribution under operating conditions with different platinum-based anodes Fulltext Access 7 Pages 2006
Corrosion behavior of Pb-Sn and Pb-2Â mass% Sn-Sr alloys during repetitive current application Fulltext Access 7 Pages 2006
First-principles calculations on the Jahn–Teller distortion in layered LiMnO2 Fulltext Access 7 Pages 2006
Structural characterization and electrochemical properties of RF-sputtered nanocrystalline Co3O4 thin-film anode Fulltext Access 7 Pages 2006
Synthesis and characterization of spinel Li4Ti5O12 anode material by oxalic acid-assisted sol–gel method Fulltext Access 7 Pages 2006
Performance of diagonal control structures at different operating conditions for polymer electrolyte membrane fuel cells Fulltext Access 7 Pages 2006
PEM fuel cell cathode carbon corrosion due to the formation of air/fuel boundary at the anode Fulltext Access 7 Pages 2006
Lowering methane and raising distillates yields in Fischer–Tropsch synthesis by using promoted and unpromoted cobalt catalysts in a dual bed reactor Fulltext Access 7 Pages 2006
Analysis of coupled electron and mass transport in the gas diffusion layer of a PEM fuel cell Fulltext Access 7 Pages 2006
CF4 plasma treatment for preparing gas diffusion layers in membrane electrode assemblies Fulltext Access 7 Pages 2006
Performance of membrane electrode assemblies based on proton exchange membranes prepared by pre-irradiation induced grafting Fulltext Access 7 Pages 2006
Pt/SiO2 catalyst as an addition to Nafion/PTFE self-humidifying composite membrane Fulltext Access 7 Pages 2006
Multi-walled carbon nanotubes based Pt electrodes prepared with in situ ion exchange method for oxygen reduction Fulltext Access 7 Pages 2006
Proton conduction in ceria-doped Ba2In2O5 nanocrystalline ceramic at low temperature Fulltext Access 7 Pages 2006
Effect of operation parameters on performance of micro direct methanol fuel cell fabricated on printed circuit board Fulltext Access 7 Pages 2006
Application of TG–FTIR to the determination of organic oxygen and its speciation in the Argonne premium coal samples Fulltext Access 7 Pages 2006
Study on design of Huadian oil shale-fired circulating fluidized bed boiler Fulltext Access 7 Pages 2006
Modelling of a wall fired furnace for different operating conditions using FLUENT Fulltext Access 7 Pages 2006
Removal of sulfur dioxide and nitrogen oxides by using ozone injection and absorption–reduction technique Fulltext Access 7 Pages 2006
Thermodynamic equilibrium study of trace element transformation during underground coal gasification Fulltext Access 7 Pages 2006
Coal liquefaction using supercritical toluene–tetralin mixture in a semi-continuous reactor Fulltext Access 7 Pages 2006
Thermal inefficiency model for determination of the bed-to-gas heat transfer coefficients with effectiveness factor in a fluidised bed Fulltext Access 7 Pages 2006
The hydrogenation of maleic anhydride to γ-butyrolactone using mixed metal oxide catalysts in a batch-type reactor Fulltext Access 7 Pages 2006
Almond residues gasification plant for generation of electric power. Preliminary study Fulltext Access 7 Pages 2006
Thermogravimetric study of the pyrolysis of biomass residues from tomato processing industry Fulltext Access 7 Pages 2006
An investigation on effects of various parameters on viscosities of coal–water mixture prepared with Erzurum–Aşkale lignite coal Fulltext Access 7 Pages 2006
Charge and discharge characteristics of a commercial LiCoO2-based 18650 Li-ion battery Fulltext Access 7 Pages 2006
Preparation and electrochemical characteristics of LiNi1/3Mn1/3Co1/3O2 coated with metal oxides coating Fulltext Access 7 Pages 2006
Ionic conduction through heterogeneous solids: Delineation of the blocking and space charge effects Fulltext Access 7 Pages 2006
Effect of Co content on performance of LiAl1/3−xCoxNi1/3Mn1/3O2 compounds for lithium-ion batteries Fulltext Access 7 Pages 2006
A polyvinyl alcohol/p-sulfonate phenolic resin composite proton conducting membrane Fulltext Access 7 Pages 2006
Optimization of a water–gas shift reactor over a Pt/ceria/alumina monolith Fulltext Access 7 Pages 2006
Characterization of transport properties in gas diffusion layers for proton exchange membrane fuel cells: 1. Wettability (internal contact angle to water and surface energy of GDL fibers) Fulltext Access 7 Pages 2006
The stability of a PtRu/C electrocatalyst at anode potentials in a direct methanol fuel cell Fulltext Access 7 Pages 2006
Solubility and electrochemical studies of LiFeO2–LiCoO2–NiO materials for the MCFC cathode application Fulltext Access 7 Pages 2006
Kinetics of CO2/Char gasification at elevated temperatures: Part I: Experimental results Fulltext Access 7 Pages 2006
Porous nickel MCFC cathode coated by potentiostatically deposited cobalt oxide: II. Structural and morphological behavior in molten carbonate Fulltext Access 7 Pages 2006
Electrochemical characteristics and impedance spectroscopy studies of nano-cobalt silicate hydroxide for supercapacitor Fulltext Access 7 Pages 2006
Cycle-life testing of large-capacity lithium-ion cells in simulated satellite operation Fulltext Access 7 Pages 2006
Tin–graphite materials prepared by reduction of SnCl4 in organic medium: Synthesis, characterization and electrochemical lithiation Fulltext Access 7 Pages 2006
Triple hybrid materials: A novel concept within the field of organic–inorganic hybrids Fulltext Access 7 Pages 2006
Thermal stability of LiPF6 salt and Li-ion battery electrolytes containing LiPF6 Fulltext Access 7 Pages 2006
Characterization of electrolyte–electrode interlayers in thin film solid oxide fuel cells Fulltext Access 7 Pages 2006
Anode barrier layers for tubular solid-oxide fuel cells with methane fuel streams Fulltext Access 7 Pages 2006