Freeze-cast alumina pore networks: Effects of freezing conditions and dispersion medium Fulltext Access 11 Pages 2015
Waste-to-resource preparation of a porous ceramic membrane support featuring elongated mullite whiskers with enhanced porosity and permeance Fulltext Access 11 Pages 2015
Optimization of the rheology and sintering behavior of electrolyte and anode pastes to be used in co-extrusion of solid oxide fuel cells Fulltext Access 11 Pages 2015
Influence of the architecture of dendritic-like polycarbosilanes on the ceramic yield Fulltext Access 11 Pages 2015
Thickness-dependence of the breakdown strength: Analysis of the dielectric and mechanical failure Fulltext Access 11 Pages 2015
Zirconia-based composites for biomedical applications: Role of second phases on composition, microstructure and zirconia transformability Fulltext Access 11 Pages 2015
Friction and surface fracture of a silicon carbide ceramic brake disc tested against a steel pad Fulltext Access 11 Pages 2015
In situ study of mass loss, shrinkage and stress development during drying of cast colloidal films Fulltext Access 11 Pages 2015
Influence of different sintering techniques on microstructure and phase composition of oxygen-transporting ceramic Fulltext Access 11 Pages 2015
Comparison of extruded and pressed low cost ceramic supports for microfiltration membranes Fulltext Access 11 Pages 2015
Mechanochemically synthesized high alumina cement and their implementation as low cement castables with some micro-fine additives Fulltext Access 11 Pages 2015
Correlations of electrochemical noise, acoustic emission and complementary monitoring techniques during intergranular stress-corrosion cracking of austenitic stainless steel Fulltext Access 11 Pages 2015
Prediction of primary water stress corrosion crack growth rates in Alloy 600 using artificial neural networks Fulltext Access 11 Pages 2015
Influence of nanoclay particles modification by polyester-amide hyperbranched polymer on the corrosion protective performance of the epoxy nanocomposite Fulltext Access 11 Pages 2015
Effects of phosphorus segregation on stress corrosion cracking in the heat-affected zone of a dissimilar weld joint between a Ni-base alloy and a low alloy steel Fulltext Access 11 Pages 2015
Electrochemical noise analysis of the corrosion of high-purity Mg–Al alloys Fulltext Access 11 Pages 2015
The application of benzimidazole and zinc cations intercalated sodium montmorillonite as smart ion exchange inhibiting pigments in the epoxy ester coating Fulltext Access 11 Pages 2015
Suppression of hydrogen-induced damage in friction stir welded low carbon steel joints Fulltext Access 11 Pages 2015
Chemical modification of hydrotalcite coating for enhanced corrosion resistance Fulltext Access 11 Pages 2015
A microscopic study on the corrosion fatigue of ultra-fine grained and conventional Al–Mg alloy Fulltext Access 11 Pages 2015
Nanoscale analysis of the influence of pre-oxidation on oxide formation and wetting behavior of hot-dip galvanized high strength steel Fulltext Access 11 Pages 2015
Dynamic saturation curve measurement in liquid composite molding by heat transfer analysis Fulltext Access 11 Pages 2015
Novel production and characterization of porous calcium phosphate suitable for bone tissue engineering applications Fulltext Access 11 Pages 2015
Comparative parametric study on development of porous structure of aluminium oxide in presence of anionic and cationic surfactants Fulltext Access 11 Pages 2015
Numerical investigation of two-dimensional thermally assisted ductile regime milling of nanocrystalline hydroxyapatite bioceramic material Fulltext Access 11 Pages 2015
Experimental investigation of the biaxial strength of thermal barrier coating system Fulltext Access 11 Pages 2015
Surface phase transformation in austenitic stainless steel induced by cyclic oxidation in humidified air Fulltext Access 11 Pages 2015
Self-healing property of hydroxyapatite and octacalcium phosphate coatings on pure magnesium and magnesium alloy Fulltext Access 11 Pages 2015
Molecular modelling and electrochemical evaluation of organic inhibitors in concrete Fulltext Access 11 Pages 2015
Phase transformation of oxide film in zirconium alloy in high temperature hydrogenated water Fulltext Access 11 Pages 2015
Oxidation model for construction materials in supercritical water-Estimation of kinetic and transport parameters Fulltext Access 11 Pages 2015
Structural optimisation of random discontinuous fibre composites: Part 1 - Methodology Fulltext Access 11 Pages 2015
The effects of heat input on adjacent paths during Automated Fibre Placement Fulltext Access 11 Pages 2015
Temperature dependence of creep and recovery behaviors of polymer composites filled with chemically reduced graphene oxide Fulltext Access 11 Pages 2015
Bi-modal trends in the long-term corrosion of copper and high copper alloys Fulltext Access 11 Pages 2015
Tensile behaviour of stainless steel fibre/epoxy composites with modified adhesion Fulltext Access 11 Pages 2015
Mechanical, thermal and morphological properties of a bio-based composite derived from banana plant source Fulltext Access 11 Pages 2015
Effects of mixed-mode ratio and step-shaped micro pattern surface on crack-propagation resistance of carbon-fiber-reinforced plastic/adhesive interface Fulltext Access 11 Pages 2015
Mechanical recycling and composition effects on the properties and structure of hardwood cellulose-reinforced high density polyethylene eco-composites Fulltext Access 11 Pages 2015
Improving the through-thickness thermal and electrical conductivity of carbon fibre/epoxy laminates by exploiting synergy between graphene and silver nano-inclusions Fulltext Access 11 Pages 2015
Continuous resistance welding of thermoplastic composites: Modelling of heat generation and heat transfer Fulltext Access 11 Pages 2015
Filling behavior, morphology evolution and crystallization behavior of microinjection molded poly(lactic acid)/hydroxyapatite nanocomposites Fulltext Access 11 Pages 2015
Molecular dynamics simulations of orientation induced interfacial enhancement between single walled carbon nanotube and aromatic polymers chains Fulltext Access 11 Pages 2015
Compressive failure of laminates containing an embedded wrinkle; experimental and numerical study Fulltext Access 11 Pages 2015
Hierarchical electromagnetic absorption in micro-waveguide stuffed with magnetic media for resin-based composites of graphene nanosheets and manganese oxides Fulltext Access 11 Pages 2015
Numerical and analytical modeling of aligned short fiber composites including imperfect interfaces Fulltext Access 11 Pages 2015
Effect of ion substitution on properties of bioactive glasses: A review Fulltext Access 11 Pages 2015
Role of catalytic agents and processing parameters in the graphitization process of a carbon-based refractory binder Fulltext Access 11 Pages 2015
Synthesis of magnetic hydroxyapatite by hydrothermal–microwave technique: Dielectric, protein adsorption, blood compatibility and drug release studies Fulltext Access 11 Pages 2015
Titania nanotube/nano-brushite composited bioactive coating with micro/nanotopography on titanium formed by anodic oxidation and hydrothermal treatment Fulltext Access 11 Pages 2015
Preparation and characterization of carboxyl functionalized multiwall carbon nanotubes–hydroxyapatite composites Fulltext Access 11 Pages 2015
Morphological study of yttria-stabilized zirconia hollow fibre membrane prepared using phase inversion/sintering technique Fulltext Access 11 Pages 2015
Effect of temperature and aluminium on calcium (alumino)silicate hydrate chemistry under equilibrium conditions Fulltext Access 11 Pages 2015
Cracking behavior in reinforced concrete members with steel fibers: A comprehensive experimental study Fulltext Access 11 Pages 2015
Modeling of early age loss of lithium ions from pore solution of cementitious systems treated with lithium nitrate Fulltext Access 11 Pages 2015
The influence of silanes on hydration and strength development of cementitious systems Fulltext Access 11 Pages 2015
Experimental chemo-mechanics of early-age fracture properties of cement paste Fulltext Access 11 Pages 2015
Microstructure and flexural properties of multilayered fiber-reinforced oxide composites fabricated by a novel lamination route Fulltext Access 11 Pages 2015
Degradation mechanism of slag blended mortars immersed in sodium sulfate solution Fulltext Access 11 Pages 2015
Numerical modeling of supercritical carbonation process in cement-based materials Fulltext Access 11 Pages 2015
An innovative approach to reproduce the biodeterioration of industrial cementitious products in a sewer environment. Part I: Test design Fulltext Access 11 Pages 2015
The effect of organic and inorganic fibres on the mechanical and thermal properties of aluminate activated geopolymers Fulltext Access 11 Pages 2015
Failure response of fiber-epoxy unidirectional laminate under transverse tensile/compressive loading using finite-volume micromechanics Fulltext Access 11 Pages 2015
Macroscopic response of carbon-fiber pyramidal truss core panel taking account of local defect Fulltext Access 11 Pages 2015
Quasi-static and dynamic mechanical responses of hybrid laminated composites based on high-density flexible polyurethane foam Fulltext Access 11 Pages 2015
A new analytical model on predicting the elastic properties of 3D full five-directional braided composites based on a multiunit cell model Fulltext Access 11 Pages 2015
Refined and generalized hybrid type quasi-3D shear deformation theory for the bending analysis of functionally graded shells Fulltext Access 11 Pages 2015
Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre–polyester composites Fulltext Access 11 Pages 2015
Kissing bond detection in structural adhesive joints using nonlinear dynamic characteristics Fulltext Access 11 Pages 2015
Finite element analyses on transverse impact behaviors of 3-D circular braided composite tubes with different braiding angles Fulltext Access 11 Pages 2015
The influence of molybdenum on the corrosion resistance of ternary Zn–Co–Mo alloy coatings deposited from citrate–sulphate bath Fulltext Access 11 Pages 2015
Influence of the shielding gas composition on the passive film and erosion corrosion of tube-to-tube sheet welds of hyper duplex stainless steel Fulltext Access 11 Pages 2015
Influence of the fiber/matrix strength on the mechanical properties of a glass fiber/thermoplastic-matrix plain weave fabric composite Fulltext Access 11 Pages 2015
A methodology to reduce variability during vacuum infusion with optimized design of distribution media Fulltext Access 11 Pages 2015
Microstructure and tensile properties of carbon–epoxy laminates produced by automated fibre placement: Influence of a caul plate on the effects of gap and overlap embedded defects Fulltext Access 11 Pages 2015
Predictive model for the detection of out-of-plane defects formed during textile-composite manufacture Fulltext Access 11 Pages 2015
Influence of plastic deformation on single-fiber push-out tests of carbon fiber reinforced epoxy resin Fulltext Access 11 Pages 2015
Microstructure evolution during fabrication and microstructure–property relationships in vapour-grown carbon nanofibre-reinforced aluminium matrix composites fabricated via powder metallurgy Fulltext Access 11 Pages 2015
Micro-mechanical analysis of the effect of ply thickness on the transverse compressive strength of polymer composites Fulltext Access 11 Pages 2015
Localized toughening of carbon/epoxy laminates using dissolvable thermoplastic interleaves and electrospun fibres Fulltext Access 11 Pages 2015
Study of layup influences on the nonlinear behavior of composites by evaluation of ply stiffness reduction Fulltext Access 11 Pages 2015
Determination of the impact tensile strength of structural adhesive butt joints with a modified split Hopkinson pressure bar Fulltext Access 11 Pages 2015
Strontium and cobalt doped-lanthanum chromite: Characterisation of synthesised powders and sintered materials Fulltext Access 11 Pages 2015
Study of the chemical activation of hydroxyapatite rich ashes as raw materials for geopolymers Fulltext Access 11 Pages 2015
Duplex ceramic coating produced by low temperature thermo-reactive deposition and diffusion on the cold work tool steel substrate: Thermodynamics, kinetics and modeling Fulltext Access 11 Pages 2015
Sintering behavior of spark plasma sintered alumina with graphene nanoplatelet reinforcement Fulltext Access 11 Pages 2015
Investigation on slag fiber characteristics: Mechanical property and anti-corrosion performance Fulltext Access 11 Pages 2015
Studies on the synthesis of nanocrystalline yttria powder by oxalate deagglomeration and its sintering behaviour Fulltext Access 11 Pages 2015
Characterisation, significance and detection of manufacturing defects in Reaction Sintered Silicon Carbide armour materials Fulltext Access 11 Pages 2015
Micronizing ceramic pigments for inkjet printing: Part II. Effect on phase composition and color Fulltext Access 11 Pages 2015
Changes in structure and in mechanical properties during the pyrolysis conversion of crosslinked polymethylsiloxane and polymethylphenylsiloxane resins to silicon oxycarbide glass Fulltext Access 11 Pages 2015