Atomistic simulation of martensitic phase transformation at the crack tip in B2 NiAl Fulltext Access 7 Pages 2007
Electronic structure of Pd42.5Ni7.5Cu30P20, an excellent bulk metallic glass former: Comparison to the Pd40Ni40P20 reference glass Fulltext Access 7 Pages 2007
Stabilization of extended stacking faults by {1 1 1}/{1 1 2} twin junction interactions Fulltext Access 7 Pages 2007
Direct measurement of residual stresses and their effects on the microstructure and mechanical properties of heat-treated Si3N4 ceramics II: With CeO2 as a single additive Fulltext Access 7 Pages 2007
Discrete dislocation simulation of nanoindentation: Indentation size effect and the influence of slip band orientation Fulltext Access 7 Pages 2007
Atomistic investigation of the effects of temperature and surface roughness on diffusion bonding between Cu and Al Fulltext Access 7 Pages 2007
Refining mechanism of the electric current pulse on the solidification structure of pure aluminum Fulltext Access 7 Pages 2007
Switching characteristics of MPB compositions of (Bi0.5Na0.5)TiO3–BaTiO3–(Bi0.5K0.5)TiO3 lead-free ferroelectric ceramics Fulltext Access 7 Pages 2007
Mechanical model to evaluate the effect of the dispersion in nanocomposites Fulltext Access 7 Pages 2007
The influence of shear rate and temperature on the viscosity and fragility of the Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 metallic-glass-forming liquid Fulltext Access 7 Pages 2007
A universal relation for edge chipping from sharp contacts in brittle materials: A simple means of toughness evaluation Fulltext Access 7 Pages 2007
Overestimation of the interface thickness around convex-shaped grain by sectional analysis Fulltext Access 7 Pages 2007
Large magnetoresistance observed in facing-target sputtered Ni-doped CNx amorphous composite films Fulltext Access 7 Pages 2007
Correlation between atomic order and the characteristics of the structural and magnetic transformations in Ni–Mn–Ga shape memory alloys Fulltext Access 7 Pages 2007
Feathery grain growth during solidification under forced flow conditions Fulltext Access 7 Pages 2007
On the performance of pyrolytic MnO2/tantalum capacitors: Columnar vs. nanocrystalline cathodic layers Fulltext Access 7 Pages 2007
Synthesis, growth mechanism and magnetic properties of SiO2-coated Co nanocapsules Fulltext Access 7 Pages 2007
Sensitivity of polymer nanoindentation creep measurements to experimental variables Fulltext Access 7 Pages 2007
Texture development in Bi1.5Pb0.5Sr1.7Y0.5Co2O9−δ layered cobaltite by high-temperature compression deformation and its effect on thermoelectric properties Fulltext Access 7 Pages 2007
A comment on the role of Frank–Read sources in plasticity of nanomaterials Fulltext Access 7 Pages 2007
Short-range order structure and effective pair-interaction energy in Ni–Si alloys Fulltext Access 7 Pages 2007
Tetragonal phase stability in ZrO2 film formed on zirconium alloys and its effects on corrosion resistance Fulltext Access 7 Pages 2007
Effect of atomic ordering on the phase transformations in Ni–Mn–Ga shape memory alloys Fulltext Access 7 Pages 2007
Topological and metrical analysis of normal grain growth in three dimensions Fulltext Access 7 Pages 2007
Morphology of WC grains in WC–Co alloys: Theoretical determination of grain shape Fulltext Access 7 Pages 2007
Variability in the segregation of bismuth between grain boundaries in copper Fulltext Access 7 Pages 2007
Improvement in hydrogen sorption kinetics of MgH2 with Nb hydride catalyst Fulltext Access 7 Pages 2007
Effect of solute segregation on the strength of nanocrystalline alloys: Inverse Hall–Petch relation Fulltext Access 7 Pages 2007
Enhanced piezoelectricity due to phase transitions and coexistence in 0.7Pb(Mg1/3Nb2/3)–0.3PbTiO3 single crystal Fulltext Access 7 Pages 2007
Arrest of weld-decay in 304 austenitic stainless steel by twin-induced grain boundary engineering Fulltext Access 7 Pages 2007
Simple solvothermal routes to synthesize nanocrystalline Bi2MoO6 photocatalysts with different morphologies Fulltext Access 7 Pages 2007
Determination of the local environment of silicon and the microstructure of quaternary CrAl(Si)N films Fulltext Access 7 Pages 2007
XPS study on the surface films of a newly designed Ni-free Ti-based bulk metallic glass Fulltext Access 7 Pages 2007
Low-temperature transformation kinetics of electron-beam deposited 5 wt.% yttria-stabilized zirconia Fulltext Access 7 Pages 2007
Atomistic simulation of stress-induced phase transformation and recrystallization at the crack tip in bcc iron Fulltext Access 7 Pages 2007
Evaluating modulus and hardness enhancement in evaporated Cu/W multilayers Fulltext Access 7 Pages 2007
Deformation in a Zr57Ti5Cu20Ni8Al10 bulk metallic glass during nanoindentation Fulltext Access 7 Pages 2007
Computation of the preferential nucleation sites for Ge quantum dots on a relaxed SiGe layer Fulltext Access 7 Pages 2007
In-depth analysis of residual stress in an alumina coating on silicon nitride substrate using confocal Raman piezo-spectroscopy Fulltext Access 7 Pages 2007
The behaviour of FRP wrapped HSC columns under different eccentric loads Fulltext Access 7 Pages 2007
Parameter optimization of the dominant anisotropic layer of alternately laminated damped structures Fulltext Access 7 Pages 2007
The behavior of two parallel interface cracks in magneto–electro–elastic materials under an anti-plane shear stress loading Fulltext Access 7 Pages 2007
On the buckling of cracked composite cylindrical shells under axial compression Fulltext Access 7 Pages 2007
Buckling of symmetrical cross-ply composite rectangular plates under a linearly varying in-plane load Fulltext Access 7 Pages 2007
Structural health monitoring of composite wing structure during durability test Fulltext Access 7 Pages 2007
Mechanical properties of composites filled with SMA particles and short fibers Fulltext Access 7 Pages 2007
Dynamic analysis of composite cylindrical shells using differential quadrature method (DQM) Fulltext Access 7 Pages 2007
Creep deformations and stresses in thick-walled cylindrical vessels of functionally graded materials subjected to internal pressure Fulltext Access 7 Pages 2007
The effects of disbonds on the stress intensity factor of aluminium panels repaired using composite materials Fulltext Access 7 Pages 2007
Torsional strengthening of reinforced concrete box beams using carbon fiber reinforced polymer Fulltext Access 7 Pages 2007
Enhanced model for interlaminar normal stress in singly curved laminates Fulltext Access 7 Pages 2007
The effect of sea water exposure on the interfacial fracture of some sandwich systems in marine use Fulltext Access 7 Pages 2007
Failure of pultruded GRP single-bolt tension joints under hot–wet conditions Fulltext Access 7 Pages 2007
A mode III crack in a functionally graded piezoelectric strip bonded to two dissimilar piezoelectric half-planes Fulltext Access 7 Pages 2007
Effect of different compatibilizing agents on the mechanical properties of lignocellulosic material filled polyethylene bio-composites Fulltext Access 7 Pages 2007
Field and laboratory performance of a rectangular shaped glass fiber reinforced polymer deck Fulltext Access 7 Pages 2007
Limits of asymptotic solutions in low-velocity impact of composite plates Fulltext Access 7 Pages 2007
The effect of core thickness on the flexural behaviour of aluminium foam sandwich structures Fulltext Access 7 Pages 2007
Low velocity impact induced damage evaluation and its effect on the residual flexural properties of pultruded GRP composites Fulltext Access 7 Pages 2007
Determination of the flow curves of austenite steel wire in the drawing process Fulltext Access 7 Pages 2007
Peeling and characterisation of the carbon fibre-based radicular adhesive anchorage interface Fulltext Access 7 Pages 2007
Enhancing strength and ductility of magnesium by integrating it with aluminum nanoparticles Fulltext Access 7 Pages 2007
Transient regimes during high-temperature deformation of a bulk metallic glass: A free volume approach Fulltext Access 7 Pages 2007
Large-scale synthesis of onion-like carbon nanoparticles by carbonization of phenolic resin Fulltext Access 7 Pages 2007
A correction to the analytical solution of the mixed-mode bending (MMB) problem Fulltext Access 7 Pages 2007
Preparation and characterization of carbon nanotube/polyetherimide nanocomposite films Fulltext Access 7 Pages 2007
Mode I interlaminar fracture of CNF or/and PZT doped CFRPs via acoustic emission monitoring Fulltext Access 7 Pages 2007
Effect of plasma treatment on adhesion characteristics at interfaces between underfill and substrate Fulltext Access 7 Pages 2007
Characterization of fillers used in abrasive articles by means of inverse gas chromatography and principal component analysis Fulltext Access 7 Pages 2007
Cross-linking poly[(vinyl acetate)-co-N-methylolacrylamide] latex adhesive performance part I: N-methylolacrylamide (NMA) distribution Fulltext Access 7 Pages 2007
A numerical and experimental study of gap length on adhesively bonded aluminum double-lap joint Fulltext Access 7 Pages 2007
Comparison of EFD and CFD investigations of velocity fields for selected body–propeller configurations Fulltext Access 7 Pages 2007
Mechanical behaviour of vinyl plastisols with cellulosic fillers. Analysis of the interface between particles and matrices Fulltext Access 7 Pages 2007
An evaluation of the elastic properties of an adhesive layer using the tensile-butt joint test: Procedures and error estimates Fulltext Access 7 Pages 2007
Proposal for the graphic representation of structural adhesive joints in engineering drawings and their integration in a computer-assisted designing system Fulltext Access 7 Pages 2007
Evaluation of cryogenic performance of adhesives using composite–aluminum double-lap joints Fulltext Access 7 Pages 2007
Buckling of thick functionally graded plates under mechanical and thermal loads Fulltext Access 7 Pages 2007
Analysis of dynamic stability for composite laminated cylindrical shells with delaminations Fulltext Access 7 Pages 2007
Fatigue analysis of unidirectional GFRP composites under combined bending and torsional loads Fulltext Access 7 Pages 2007
Stiffness and vibration characteristics of SMA/ER3 composites with shape memory alloy short fibers Fulltext Access 7 Pages 2007
Spline finite strip analysis of composite plates based on higher-order zigzag composite plate theory Fulltext Access 7 Pages 2007
Compressive behavior of multi-axial multi-layer warp knitted (MMWK) fabric composite at various strain rates Fulltext Access 7 Pages 2007