The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 7. Interface strength and fibre strain in injection moulded long fibre PP at high fibre content Fulltext Access 7 Pages 2007
Synthesis and characterization of metallic nanoparticles and their incorporation into electroconductive polymer composites Fulltext Access 7 Pages 2007
Solid freeform fabrication of epoxidized soybean oil/epoxy composite with bis or polyalkyleneamine curing agents Fulltext Access 7 Pages 2007
Two-dimensional correlation relaxometry studies of cement pastes performed using a new one-sided NMR magnet Fulltext Access 7 Pages 2007
Improved mechanical performance: Shear behaviour of strain-hardening cement-based composites (SHCC) Fulltext Access 7 Pages 2007
Combined time domain reflectometry and AC-impedance spectroscopy of fiber-reinforced fresh-cement composites Fulltext Access 7 Pages 2007
Effects of material and environmental parameters on chloride penetration profiles in concrete structures Fulltext Access 7 Pages 2007
Toughness enhancement in steel fiber reinforced concrete through fiber hybridization Fulltext Access 7 Pages 2007
The influence of grinding technique on the liberation of clinker minerals and cement properties Fulltext Access 7 Pages 2007
A novel fiber treatment applied to woven jute fabric/vinylester laminates Fulltext Access 7 Pages 2007
Rheology and conduction calorimetry of cement modified with calcined paper sludge Fulltext Access 7 Pages 2007
On the mathematics of time-dependent apparent chloride diffusion coefficient in concrete Fulltext Access 7 Pages 2007
Methods of obtaining pore solution from cement pastes and mortars for chloride analysis Fulltext Access 7 Pages 2007
Quantitative mineralogical analysis of hydraulic limes by X-ray diffraction Fulltext Access 7 Pages 2007
Measurement of the coefficient of thermal expansion of ultra-high strength cementitious composites using fibre optic sensors Fulltext Access 7 Pages 2007
Permeability characteristics of carbonated concrete considering capillary pore structure Fulltext Access 7 Pages 2007
NMR studies of pore formation and water diffusion in self-hardening cut-off wall materials Fulltext Access 7 Pages 2007
Influence of Portland cement composition on early age reactions with metakaolin Fulltext Access 7 Pages 2007
Electromagnetic properties of silicon carbide foams and their composites with silicon dioxide as matrix in X-band Fulltext Access 7 Pages 2007
Specific volume and elastic properties of glassy, icosahedral quasicrystalline and crystalline phases in Zr-Ni-Cu-Al-Pd alloy Fulltext Access 7 Pages 2007
Spatial correlation of high-energy grain boundaries in two-dimensional simulated polycrystals Fulltext Access 7 Pages 2007
Superior hydrogen storage kinetics of MgH2 nanoparticles doped with TiF3 Fulltext Access 7 Pages 2007
Application of the cluster/site approximation to fcc phases in the Ni-Al-Cr-Re system Fulltext Access 7 Pages 2007
Atomic motion during the migration of general [0Â 0Â 1] tilt grain boundaries in Ni Fulltext Access 7 Pages 2007
Mechanical and electrical properties of Cu-Ta nanocomposites prepared by high-energy ball milling Fulltext Access 7 Pages 2007
Epitaxial Ti2AlN(0Â 0Â 0Â 1) thin film deposition by dual-target reactive magnetron sputtering Fulltext Access 7 Pages 2007
Detection of corrosion fatigue cracking through current responses induced by cyclic stressing Fulltext Access 7 Pages 2007
The effect of different exposure conditions on the biofilm/copper interface Fulltext Access 7 Pages 2007
Synthesis and characterization of composites of DBSA-doped polyaniline and polystyrene-based ionomers Fulltext Access 7 Pages 2007
Carbonation rates of concretes containing high volume of pozzolanic materials Fulltext Access 7 Pages 2007
Fabrication of in situ Al/Mg2Si functionally graded materials by electromagnetic separation method Fulltext Access 7 Pages 2007
Optimization of orthotropic rectangular laminates with weak interfaces under buckling Fulltext Access 7 Pages 2007
Mechanical properties of wood–fiber reinforced polypropylene composites: Effect of a novel compatibilizer with isocyanate functional group Fulltext Access 7 Pages 2007
Synthesis and characterization of multiwalled carbon nanotube reinforced ultra high molecular weight polyethylene composite by electrostatic spraying technique Fulltext Access 7 Pages 2007
Polylactic acid/cellulose whisker nanocomposites modified by polyvinyl alcohol Fulltext Access 7 Pages 2007
Epoxy composites reinforced with deacetylated Phormium tenax leaf fibres Fulltext Access 7 Pages 2007
The effect of fabrication processes on the mechanical and interfacial properties of SiCf/Cu-matrix composites Fulltext Access 7 Pages 2007
The influence of binder tow density on the mechanical properties of spatially reinforced composites. Part 1 – Impact resistance Fulltext Access 7 Pages 2007
Reducing tensile stress concentration in perforated hybrid laminate by genetic algorithm Fulltext Access 7 Pages 2007
Percolation threshold of conducting polymer composites containing 3D randomly distributed graphite nanoplatelets Fulltext Access 7 Pages 2007
A new compounding method for exfoliated graphite–polypropylene nanocomposites with enhanced flexural properties and lower percolation threshold Fulltext Access 7 Pages 2007
Preparation and properties of electrically conductive PPS/expanded graphite nanocomposites Fulltext Access 7 Pages 2007
Isolation of nanofibers from soybean source and their reinforcing capability on synthetic polymers Fulltext Access 7 Pages 2007
Preparation and properties of Si3N4/PS composites used for electronic packaging Fulltext Access 7 Pages 2007
Effect of additives on the interfacial strength of poly(l-lactic acid) and poly(3-hydroxy butyric acid)-flax fibre composites Fulltext Access 7 Pages 2007
Fabrication of Al2O3–ZrB2 in situ composite by SHS dynamic compaction: A novel approach Fulltext Access 7 Pages 2007
Aluminum matrix composites based on preceramic-polymer-bonded SiC preforms Fulltext Access 7 Pages 2007
Multi-phase aluminide-based composites - fabrication, microstructure and properties Fulltext Access 7 Pages 2007
Microstructural characterization and ablation mechanism of TiB2/(Cu,Ni) melt-infiltrated ceramic composite Fulltext Access 7 Pages 2007
The influence of the matrix polarity on the morphology and properties of ethylene vinyl acetate copolymers–carbon nanotube nanocomposites Fulltext Access 7 Pages 2007
Preparation and mechanical properties of novel polyimide/T-silica hybrid films Fulltext Access 7 Pages 2007
Polyampholytes superabsorbent nanocomposites with excellent gel strength Fulltext Access 7 Pages 2007
Photo-stabilization properties of transparent inorganic UV-filter/epoxy nanocomposites Fulltext Access 7 Pages 2007
Preparation and characteristics of a vapor-grown carbon fiber/ceramic composite using a methylsilicone precursor Fulltext Access 7 Pages 2007
Fabrication and mechanical properties of well-dispersed multiwalled carbon nanotubes/epoxy composites Fulltext Access 7 Pages 2007
PCG solver and its computational complexity for implicit control-volume finite-element method of RTM mold filling simulation Fulltext Access 7 Pages 2007
Fabrication of multi-walled carbon nanotube reinforced polyelectrolyte hollow nanofibers by electrospinning Fulltext Access 7 Pages 2007
New polyethylene nanocomposites prepared by in-situ polymerization method using nickel a-diimine catalyst supported on organo-modified ZnAl layered double hydroxide Fulltext Access 7 Pages 2007
Novel polyacrylonitrile/Na-MMT/silica nanocomposite: Co-incorporation of two different form nano materials into polymer matrix Fulltext Access 7 Pages 2007
An NDT technique for composite structures using visualized Lamb-wave propagation Fulltext Access 7 Pages 2007
Supermolecular structure and thermal properties of poly(ethylene terephthalate)/lignin composites Fulltext Access 7 Pages 2007
Behaviour of reinforced concrete rectangular columns strengthened using GFRP Fulltext Access 7 Pages 2007
Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures Fulltext Access 7 Pages 2007
Properties of stabilized/solidified admixtures of cement and sewage sludge Fulltext Access 7 Pages 2007
Effect of supplementary cementitious materials on shrinkage and crack development in concrete Fulltext Access 7 Pages 2007
Selection of superplasticizer in concrete mix design by measuring the early electrical resistivities of pastes Fulltext Access 7 Pages 2007
A quantitative study on the plastic shrinkage cracking in high strength hybrid fibre reinforced concrete Fulltext Access 7 Pages 2007
Modeling of chloride diffusion in hetero-structured concretes by finite element method Fulltext Access 7 Pages 2007
Use of the time constant to detect corrosion speed in reinforced concrete structures Fulltext Access 7 Pages 2007
Impact of hardening conditions on to stabilized/solidified products of cement–sewage sludge–jarosite/alunite Fulltext Access 7 Pages 2007
Grey correlation analysis between strength of slag cement and particle fractions of slag powder Fulltext Access 7 Pages 2007
Modeling slump flow of concrete using second-order regressions and artificial neural networks Fulltext Access 7 Pages 2007
Mechanical properties of high density polyethylene/carbon nanotube composites Fulltext Access 7 Pages 2007
Compressive strength of mortar containing natural pozzolan under various curing temperature Fulltext Access 7 Pages 2007
A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates Fulltext Access 7 Pages 2007
Preparations and properties of maleic acid and maleic anhydride functionalized multiwall carbon nanotube/poly(urea urethane) nanocomposites Fulltext Access 7 Pages 2007
Water-based polymer/clay nanocomposite suspension for improving water and moisture barrier in coating Fulltext Access 7 Pages 2007
Development of Cr-free aluminum phosphate binders and their composite applications Fulltext Access 7 Pages 2007
A unified approach to quantify the role of friction in beam-type specimens for the measurement of mode II delamination resistance of fibre-reinforced polymers Fulltext Access 7 Pages 2007
Effect of dispersion of nano-magnesium hydroxide on the flammability of flame retardant ternary composites Fulltext Access 7 Pages 2007
Fracture behavior and damage mechanisms identification of SiC/glass ceramic composites using AE monitoring Fulltext Access 7 Pages 2007
A new strategy to prepare polyethylene nanocomposites by using a late-transition-metal catalyst supported on AlEt3-activated organoclay Fulltext Access 7 Pages 2007