Silica nanoparticles filled polypropylene: effects of particle surface treatment, matrix ductility and particle species on mechanical performance of the composites Fulltext Access 11 Pages 2005
Growth of anatase films on vicinal and flat LaAlO3 (110) substrates by oxygen plasma assisted molecular beam epitaxy Fulltext Access 11 Pages 2005
Atomic layer deposition of hafnium dioxide thin films from hafnium tetrakis(dimethylamide) and water Fulltext Access 11 Pages 2005
SiO2 film growth at low temperatures by catalyzed atomic layer deposition in a viscous flow reactor Fulltext Access 11 Pages 2005
Substrate effects correction in Auger electron spectrometry and electron probe microanalysis of thin films Fulltext Access 11 Pages 2005
Effect of Al additions in WC-(Cr1âxAlx)N coatings on the corrosion resistance of coated AISI D2 steel in a deaerated 3.5 wt.% NaCl solution Fulltext Access 11 Pages 2005
Deposition and corrosion resistance of HVOF sprayed nanocrystalline iron aluminide coatings Fulltext Access 11 Pages 2005
Mechanical properties and adhesion characteristics of hybrid sol-gel thin films Fulltext Access 11 Pages 2005
Mechanical properties of a graded B-C-N sputtered coating with varying Young's modulus: deposition, theoretical modelling and nanoindentation Fulltext Access 11 Pages 2005
Friction and wear characteristics of a Ti-containing diamond-like carbon coating with an SRV tester at high contact load and elevated temperature Fulltext Access 11 Pages 2005
Novel silk/poly(butylene succinate) biocomposites: the effect of short fibre content on their mechanical and thermal properties Fulltext Access 11 Pages 2005
Modelling the effective thermal conductivity of an unidirectional composite by the use of artificial neural networks Fulltext Access 11 Pages 2005
Active control of laminated cylindrical shells using piezoelectric fiber reinforced composites Fulltext Access 11 Pages 2005
Second-order statistics of the elastic buckling of functionally graded rectangular plates Fulltext Access 11 Pages 2005
Effect of beam size and FRP thickness on interfacial shear stress concentration and failure mode of FRP-strengthened beams Fulltext Access 11 Pages 2005
Dynamic mechanical analysis of randomly oriented intimately mixed short banana/sisal hybrid fibre reinforced polyester composites Fulltext Access 11 Pages 2005
Thermal shock fracture in unidirectional fibre-reinforced ceramic-matrix composites Fulltext Access 11 Pages 2005
Progress in the fabrication of ultra-high-temperature ceramics: “in situ” synthesis, microstructure and properties of a reactive hot-pressed HfB2-SiC composite Fulltext Access 11 Pages 2005
Specific properties and fracture toughness of syntactic foam: Effect of foam microstructures Fulltext Access 11 Pages 2005
Assessment of load transfer characteristics of a fiber-reinforced titanium-matrix composite Fulltext Access 11 Pages 2005
Thermal buckling of hybrid angle-ply laminated composite plates with a hole Fulltext Access 11 Pages 2005
Determination of thermal expansion coefficient of particulate composites by the use of a triphase model Fulltext Access 11 Pages 2005
Extended defect related energy loss in CVD diamond revealed by spectrum imaging in a dedicated STEM Fulltext Access 11 Pages 2005
Multislice theory of fast electron scattering incorporating atomic inner-shell ionization Fulltext Access 11 Pages 2005
Imaging and characterization of fine γⲠprecipitates in a commercial nickel-base superalloy Fulltext Access 11 Pages 2005
Characteristics of fracture during the approach process and wear mechanism of a silicon AFM tip Fulltext Access 11 Pages 2005
Dark field transmission electron microscope images of III-V quantum dot structures Fulltext Access 11 Pages 2005
Independent component analysis: A new possibility for analysing series of electron energy loss spectra Fulltext Access 11 Pages 2005
Ceramic/fluoropolymer composite coatings by thermal spraying-a modification of surface properties Fulltext Access 11 Pages 2005
The effects of differing nitrogen implantation conditions on penetration depth, mechanical properties, and tribological behavior of plasma-nitrided AISI 304 stainless steel Fulltext Access 11 Pages 2005
The velocity and temperature of steel droplets during electric arc spraying Fulltext Access 11 Pages 2005
Sinergistic effect of ion implantation as a surface modification technique to improve localised corrosion of AISI 304 austenitic stainless steel Fulltext Access 11 Pages 2005
Estimating the sequence complexity of a random oligonucleotide population by using in vitro thermal melting and Cot analyses Fulltext Access 11 Pages 2005
Dynamic tensile behaviour at low temperature of CFRP using a split Hopkinson pressure bar Fulltext Access 11 Pages 2005
Effect of processing parameters on electrical resistivity and thermo-sensitive properties of carbon-black/styrene-butadiene-rubber composite membranes Fulltext Access 11 Pages 2005
Chemical analysis of nanometric dielectric layers using spatially resolved VEELS Fulltext Access 11 Pages 2005
Atomic force microscopy of collagen structure in bone and dentine revealed by osteoclastic resorption Fulltext Access 11 Pages 2005
Fabrication of micromirrors with self-aligned metallization using silicon back-end-of-the-line processes Fulltext Access 11 Pages 2005
Nanocrystalline anatase TiO2 thin films: preparation and crystallite size-dependent properties Fulltext Access 11 Pages 2005
Adhesion analysis of polycrystalline diamond films on molybdenum by means of scratch, indentation and sand abrasion testing Fulltext Access 11 Pages 2005
Engineering structure and properties of hafnium oxide films by atomic layer deposition temperature Fulltext Access 11 Pages 2005
Comparative study of the structure of a-CNx and a-CNx:H films using NEXAFS, XPS and FT-IR analysis Fulltext Access 11 Pages 2005
Effect of deoxyribonucleic acid interaction on the interfacial properties of a fluid functionalized lipidic matrix Fulltext Access 11 Pages 2005
Degradation of poly(1,4-phenylene sulfide) on exposure to chlorinated water Fulltext Access 11 Pages 2005
An experimental study of low earth orbit atomic oxygen and ultraviolet radiation effects on a spacecraft material - polytetrafluoroethylene Fulltext Access 11 Pages 2005
Physico-chemical and thermal characterization of cellulose from barley straw Fulltext Access 11 Pages 2005
Studies on the enzymatic hydrolysis of polyesters. II. Aliphatic-aromatic copolyesters Fulltext Access 11 Pages 2005
Evidence of non-Arrhenius behaviour from laboratory aging and 24-year field aging of polychloroprene rubber materials Fulltext Access 11 Pages 2005
Reactivity of isocyanates with urethanes: Conditions for allophanate formation Fulltext Access 11 Pages 2005
Magnetic force microscopy studies of domain walls in nickel and cobalt films Fulltext Access 11 Pages 2005
Epitaxial growth and characterization of layered magnetic nanostructures Fulltext Access 11 Pages 2005
Preparation and characterization of boron-incorporated amorphous carbon films from a natural source of camphoric carbon as a precursor material Fulltext Access 11 Pages 2005
Characterization of LaMnAl11O19 by FT-IR spectroscopy of adsorbed NO and NO/O2 Fulltext Access 11 Pages 2005
Crystallization kinetics of amorphous SiC films: Influence of substrate Fulltext Access 11 Pages 2005
Lime-pastes with different kneading water: Pore structure and capillary porosity Fulltext Access 11 Pages 2005
Effect of compatibiliser on the biodegradation and mechanical properties of high-content starch/low-density polyethylene blends Fulltext Access 11 Pages 2005
Efficiency limitations of polycrystalline thin film solar cells: case of Cu(In,Ga)Se2 Fulltext Access 11 Pages 2005
Simulation of microhardness profiles of titanium alloys after surface nitriding using artificial neural network Fulltext Access 11 Pages 2005
Transfer of 319 Al alloy to titanium diboride and titanium nitride based (TiAlN, TiCN, TiN) coatings: effects of sliding speed, temperature and environment Fulltext Access 11 Pages 2005
Effects of hold-time at a certain temperature on LCF behavior and failure mechanism of a titanium matrix composite Fulltext Access 11 Pages 2005
Toughening of a carbon fibre reinforced epoxy anhydride composite using an epoxy terminated hyperbranched modifier Fulltext Access 11 Pages 2005
Permeability estimation algorithm to simultaneously characterize the distribution media and the fabric preform in vacuum assisted resin transfer molding process Fulltext Access 11 Pages 2005
Effect of an inhomogeneous interphase on the thermal expansion coefficient of a particulate composite Fulltext Access 11 Pages 2005
Study of the compaction behavior of composite powders under monotonic and cyclic loading Fulltext Access 11 Pages 2005
Effect of pre-treatment and nickel layer thickness on nickel silicide/silicon carbide contact Fulltext Access 11 Pages 2005
The inhibition effect of some amino acids towards the corrosion of aluminum in 1 M HCl + 1 M H2SO4 solution Fulltext Access 11 Pages 2005
Inhibitive action of bipyrazolic type organic compounds towards corrosion of pure iron in acidic media Fulltext Access 11 Pages 2005
A combined SNMS and EFTEM/EELS study on focused ion beam prepared vanadium nitride thin films Fulltext Access 11 Pages 2005
Influence of benzotriazole derivatives on the dezincification of 65-35 brass in sodium chloride Fulltext Access 11 Pages 2005
Corrosion inhibition of mild steel by some schiff base compounds in hydrochloric acid Fulltext Access 11 Pages 2005
Characterization of thin films on the nanometer scale by Auger electron spectroscopy and X-ray photoelectron spectroscopy Fulltext Access 11 Pages 2005
Evolution of morphologic properties on the preparation of Ir/Al2O3 catalysts with high metallic contents Fulltext Access 11 Pages 2005
Deposition and characterization of carbon nitride films from hexamethylenetetramine/N2 by microwave plasma-enhanced chemical vapor deposition Fulltext Access 11 Pages 2005
Pigment colors printing on cotton fabrics by surface coating induced by electron beam and thermal curing Fulltext Access 11 Pages 2005
Modeling and testing strain rate-dependent compressive strength of carbon/epoxy composites Fulltext Access 11 Pages 2005
XPS and FTIR investigation of the surface properties of different prepared titania nano-powders Fulltext Access 11 Pages 2005
Influence of cerium on the pulsed UV nanosecond laser processing of photostructurable glass ceramic materials Fulltext Access 11 Pages 2005
Effects of surface inactivation, high temperature drying and preservative treatment on surface roughness and colour of alder and beech wood Fulltext Access 11 Pages 2005
Change of thermal and dynamic-mechanical behaviour of a metallocene isotactic polypropylene during low-temperature thermo-oxidation Fulltext Access 11 Pages 2005
Stabilization of polyamides. V. Thermo-oxidation of hexano-6-lactam in the presence of copper salts Fulltext Access 11 Pages 2005
Kinetics and mechanism of the monomeric products from abiotic hydrolysis of poly[(R)-3-hydroxybutyrate] under acidic and alkaline conditions Fulltext Access 11 Pages 2005
Weathering of wood modified with the N-methylol compound 1,3-dimethylol-4,5-dihydroxyethyleneurea Fulltext Access 11 Pages 2005
Studying single-pass degradation of a high-density polyethylene in an injection molding process Fulltext Access 11 Pages 2005