Effect of Milk Protein Standardization Using Different Methods on the Composition and Yields of Cheddar Cheese

Two sets of Cheddar cheese were made in which the milk protein level (%, wt/wt) was increased from 3.3 (Control A, CA) to 3.6 (set A) or from 3.3 (control B, CB) to 4.0 (set B) by the addition of phosphocasein (PC), milk protein concentrate (MPC), or freshly prepared ultrafiltered milk retentate (UFR). The cheeses were denoted CA, PCA, MPCA, and UFRA from set A, and CB, PCB, MPCB, and UFRB, from set B, respectively. The level of cheese moisture decreased significantly on increasing milk protein level from 3.3 to 3.6 or 4.0% (wt/wt), but was not affected significantly by the method of protein standardization. The percentage milk fat recovered to cheese increased significantly on increasing the level of milk protein from 3.3 to 3.6% (wt/wt) with PC, and from 3.3 to 4.0% (wt/wt) with PC, MPC, and UFR. Increasing milk protein level from 3.3 to 4.0% (wt/wt) with PC significantly increased the percentage of milk protein recovered to cheese. Actual cheese yield increased significantly with milk protein level. The yield of cheese per 100 kg of milk normalized to reference levels of fat (3.4%, wt/wt) and casein (2.53%, wt/wt) indicated no significant effects of protein content or standardization treatment on yield. However, the moisture-adjusted yield per 100 kg of milk with reference levels of fat and casein increased significantly on increasing the protein content from 3.3 to 3.6% (wt/wt) with MPC and from 3.3 to 4.0% (wt/wt) with PC, MPC, and UFR.