Development of sintering-resistant CaO-based sorbent derived from eggshells and bauxite tailings for cyclic CO2 capture

- Novel CaO-based sorbents from bauxite tailings and eggshells have been developed.
- High CO2 capture efficiency is maintained during multiple cycles.
- Ca12Al14O33 phase is responsible for excellent CO2 cyclic absorption durability.

Carbon dioxide, one of the major greenhouse gases, are believed to be a major contributor to global warming. As a consequence, it is imperative for us to control and remove CO2 emissions. The CaO, a kind of effective CO2 sorbent at high temperature, has attracted increasing attention due to some potential advantages. The main drawback in practical application is the deterioration of CO2 capture capacity following multiples cycles. In the present study, novel low-cost porous CaO-based sorbents with excellent CO2 absorption-desorption performance were synthesized using bauxite tailings (BTs) and eggshells as raw materials via solid-phase method. Effect of different BTs content on CO2 absorption-desorption properties was investigated. Phase composition and morphologies were analyzed by XRD and SEM, and CO2 absorption properties were investigated by the simultaneous thermogravimetric analyzer. The as-prepared CaO-based sorbent doped with 10 wt% BTs showed superior CO2 absorption stability during multiple absorption-desorption cycles, with being >55% conversion after 40 cycles. This improved CO2 absorption performance was attributed to the particular morphologies of the CaO-based sorbents. Additionally, during absorption-desorption cycles the occurrence of Ca12Al14O33 phase is considered to be responsible for the excellent CO2 absorption performance of CaO-based sorbents. In the meanwhile, the use of solid waste eggshell and BTs not only decreases the release of solid waste, but also moderates the greenhouse effect resulted from CO2.