Quasi-static and fatigue performance of a cellular FRP bridge deck adhesively bonded to steel girders Fulltext Access 13 Pages 2005
Rapid tooling by laser powder deposition: Process simulation using finite element analysis Fulltext Access 13 Pages 2005
The influence of different alloying elements on the development of the γ/γ′ microstructure of nickel-base superalloys during high-temperature annealing and deformation Fulltext Access 13 Pages 2005
Thermodynamic prediction of thixoformability in alloys based on the Al–Si–Cu and Al–Si–Cu–Mg systems Fulltext Access 13 Pages 2005
Microstructure and stability of nanocrystalline aluminum 6061 created by large strain machining Fulltext Access 13 Pages 2005
Modeling of ferrite formation in a duplex stainless steel weld considering non-uniform starting microstructure Fulltext Access 13 Pages 2005
Solidification behaviour of AZ91D alloy under intensive forced convection in the RDC process Fulltext Access 13 Pages 2005
Grain boundary networks: Scaling laws, preferred cluster structure, and their implications for grain boundary engineering Fulltext Access 13 Pages 2005
Temporal evolution of the nanostructure of Al(Sc,Zr) alloys: Part I – Chemical compositions of Al3(Sc1−xZrx) precipitates Fulltext Access 13 Pages 2005
Origin of 2-stage R-phase transformation in low-temperature aged Ni-rich Ti–Ni alloys Fulltext Access 13 Pages 2005
Interfacial diffusion in a two-phase material accommodated by elastic relaxation Fulltext Access 13 Pages 2005
Magnetic Barkhausen noise from strain-induced martensite during low cycle fatigue of 304L austenitic stainless steel Fulltext Access 13 Pages 2005
An evaluation of residual stresses in graphite/PMR-15 composites by X-ray diffraction Fulltext Access 13 Pages 2005
Relationship between wear rate, surface pullout and microstructure during abrasive wear of alumina and alumina/SiC nanocomposites Fulltext Access 13 Pages 2005
Microstructure and crystallographic texture of an ultrafine grained C-Mn steel and their evolution during warm deformation and annealing Fulltext Access 14 Pages 2005
Simulation of faceted film growth in three dimensions: microstructure, morphology and texture Fulltext Access 14 Pages 2005
Effect of “475 °C embrittlement” on duplex stainless steels localized corrosion resistance Fulltext Access 14 Pages 2005
Prohesion and outdoors tests on corrosion products developed over painted galvanized steel sheets with and without Cr(VI) species Fulltext Access 14 Pages 2005
NiP/SiC composite coatings: the effects of particles on the electrochemical behaviour Fulltext Access 14 Pages 2005
Corrosion performance of conducting polymer coatings applied on mild steel Fulltext Access 14 Pages 2005
A coupled consistent third-order theory for hybrid piezoelectric plates Fulltext Access 14 Pages 2005
Dislocation-based modeling of the mechanical behavior of epitaxial metallic multilayer thin films Fulltext Access 14 Pages 2005
Effects of substrate crystallographic orientations on crystal growth and microstructure development in laser surface-melted superalloy single crystals. Mathematical modeling of single-crystal growth in a melt pool (Part II) Fulltext Access 14 Pages 2005
A computational model of ferroelectric domains. Part I: model formulation and domain switching Fulltext Access 14 Pages 2005
Determining the site occupancy of Ru in the L12 phase of a Ni-base superalloy using ALCHEMI Fulltext Access 14 Pages 2005
Modelling of composite and sandwich plates by a trigonometric layerwise deformation theory and radial basis functions Fulltext Access 14 Pages 2005
Micromechanical modeling of three-dimensional open-cell foams using the matrix method for spatial frames Fulltext Access 14 Pages 2005
The quasi-static, cyclic fatigue and final fracture behavior of a magnesium alloy metal-matrix composite Fulltext Access 14 Pages 2005
Secondary bending in multi fastener, composite-to-aluminium single shear lap joints Fulltext Access 14 Pages 2005
On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: experimental Fulltext Access 14 Pages 2005
Influence of localized imperfection on the instability of isotropic/cross-ply cylindrical shells/rings under external pressure Fulltext Access 14 Pages 2005
Novel joint deformation models and their application to delamination fracture analysis Fulltext Access 14 Pages 2005
Effects of TiO2 and SiO2 additions on phase formation, microstructures and PTCR characteristics of Sb-doped barium strontium titanate ceramics Fulltext Access 14 Pages 2005
Solid state coordination chemistry: temperature dependence of the crystal chemistry of the oxovanadium-phenylphosphonate-copper(II)-2,2â²-bipyridine system. Crystal structures of the one-dimensional [{Cu(bpy)}VO2(O3PC6H5)(HO3PC6H5)], [{Cu3(bpy)3(H2O)}V4O Fulltext Access 14 Pages 2005
Synthesis, structure and properties of Mn(II), Zn(II), Ag(I) and Cu(II) complexes with 1,3-bis(imidazole-1-ylmethyl)-5-methylbenzene Fulltext Access 14 Pages 2005
The calcium based fullerenoïd Ca33Bi22.7Al48O139.05: An enantiomorphic structure of strontium aluminate Fulltext Access 14 Pages 2005
EPR and optical absorption studies of Cu2+ ions in alkaline earth alumino borate glasses Fulltext Access 14 Pages 2005
A SO2 gas sensor based upon composite Nasicon/Sr-β-Al2O3 bielectrolyte Fulltext Access 14 Pages 2005
Structure of partially reduced xPbO (1 â x)SiO2 glasses: combined EXAFS and MD study Fulltext Access 14 Pages 2005
Creep resistance of the directionally solidified ceramic eutectic of Al2O3/c-ZrO2(Y2O3): experiments and models Fulltext Access 14 Pages 2005
Study of conversion coatings obtained from tungstate-phosphoric acid solutions Fulltext Access 14 Pages 2005
Crystal structures of CeO2-ZrO2-Ta2O5 ternary system studied by Rietveld method Fulltext Access 14 Pages 2005
Drying mechanisms and stress development in aqueous alumina tape casting Fulltext Access 14 Pages 2005
Diphasic aluminosilicate gels with two stage mullitization in temperature range of 1200-1300 °C Fulltext Access 14 Pages 2005
A comparison study of tialite ceramics doped with various oxide materials and tialite-mullite composites: microstructural, thermal and mechanical properties Fulltext Access 14 Pages 2005
Strain-rate dependence of low cycle fatigue behavior in a simulated BWR environment Fulltext Access 14 Pages 2005
Oxide and sulphide layers on copper exposed to H2S containing moist air Fulltext Access 14 Pages 2005
Film formation and surface growth on tin electrodes in bicarbonate solutions: an impedance spectroscopy study Fulltext Access 14 Pages 2005
Temporal evolution of the nanostructure of Al(Sc,Zr) alloys: Part II-coarsening of Al3(Sc1−xZrx) precipitates Fulltext Access 14 Pages 2005
Mechanistic interpretation of electrochemical behaviour of galvannealing coating in saline environment Fulltext Access 14 Pages 2005
Corrosion inhibition of copper by potassium ethyl xanthate in acidic chloride solutions Fulltext Access 14 Pages 2005
Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins Fulltext Access 14 Pages 2005
Vacancy clustering and relaxation behavior in rapidly solidified B2 FeAl ribbons Fulltext Access 14 Pages 2005
Study of atom diffusivity and related relaxation phenomena in Fe3Al–(Ti,Nb)–C alloys Fulltext Access 14 Pages 2005
On the evolution of faceted grain-boundary grooves by surface diffusion Fulltext Access 14 Pages 2005
Grain structure formation during friction stir welding observed by the ‘stop action technique’ Fulltext Access 14 Pages 2005
Transition of deformation mechanisms and its connection to grain size distribution in nanocrystalline metals Fulltext Access 14 Pages 2005
Pit-to-crack transition in pre-corroded 7075-T6 aluminum alloy under cyclic loading Fulltext Access 14 Pages 2005
Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steel Fulltext Access 14 Pages 2005
Constituent phase diagrams of the Al–Cu–Fe–Mg–Ni–Si system and their application to the analysis of aluminium piston alloys Fulltext Access 14 Pages 2005
Effects of interfacial debonding on the rate-dependent response of metal matrix composites Fulltext Access 14 Pages 2005
Mechanical behavior of Σ tilt grain boundaries in nanoscale Cu and Al: A quasicontinuum study Fulltext Access 14 Pages 2005
Intrinsic diffusion simulation for single-phase, multicomponent systems Fulltext Access 14 Pages 2005
Morphology of ceramic particulates formed in a premixed oxygen/acetylene flame from liquid precursor droplets Fulltext Access 14 Pages 2005
Characterization of interfacial mechanical properties in carbon fiber/aluminium matrix composites by the nanoindentation technique Fulltext Access 14 Pages 2005
Thermal postbuckling analysis of laminated cross-ply truncated circular conical shells Fulltext Access 14 Pages 2005
Flexural-torsional buckling of fiber-reinforced plastic composite open channel beams Fulltext Access 14 Pages 2005
Strength and failure mechanisms of composite laminates subject to localised transverse loading Fulltext Access 14 Pages 2005
Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites – A comparative study Fulltext Access 14 Pages 2005
Consideration of material variability in reliability analysis of FRP strengthened bridge decks Fulltext Access 14 Pages 2005
Two-order-parameter model of the liquid–glass transition. I. Relation between glass transition and crystallization Fulltext Access 14 Pages 2005
Dielectric spectroscopy and micellization of aqueous solutions p-isononylphenoloxyethyleneglycolether Fulltext Access 14 Pages 2005
Time and temperature dependence of the viscoelastic properties of CFRP by dynamic mechanical analysis Fulltext Access 14 Pages 2005
The effect of structural heterogeneity on the pitting corrosion behavior of melt-spun amorphous NiZr alloys Fulltext Access 14 Pages 2005
The thermal stability in air of hot-pressed diboride matrix composites for uses at ultra-high temperatures Fulltext Access 14 Pages 2005
Validation of corrosion rates measured by the Tafel extrapolation method Fulltext Access 14 Pages 2005
Studies of the corrosion of mild steel in alkali-activated slag cement mortars with sodium chloride admixtures by a galvanostatic pulse method Fulltext Access 14 Pages 2005
Ultrathin protective films of two-dimensional polymers on passivated iron against corrosion in 0.1 M NaCl Fulltext Access 14 Pages 2005
Influence of deposited particles of Ni and Co on the passivity of aluminium Fulltext Access 14 Pages 2005
Galvanic current induced by heterogeneous structures on stainless steel wire Fulltext Access 14 Pages 2005