Electrochemical and XPS studies and the potential scan rate dependent pitting corrosion behavior of Zircaloy-2 in 5% NaCl solution Fulltext Access 14 Pages 2005
Relations between sample preparation and SKPFM Volta potential maps on an EN AW-6005 aluminium alloy Fulltext Access 14 Pages 2005
Reproducibility of corrosion parameters for the acidic dissolution of pure iron: potentiostatic polarisation Fulltext Access 14 Pages 2005
Pitting corrosion of titanium by a freshwater strain of sulphate reducing bacteria (Desulfovibrio vulgaris) Fulltext Access 14 Pages 2005
Mineral admixtures in mortars effect of type, amount and fineness of fine constituents on compressive strength Fulltext Access 14 Pages 2005
Amperometric hydrogen permeation measurement in iron using solid polymer electrolyte fuel cells Fulltext Access 14 Pages 2005
Durability of geopolymer materials in sodium and magnesium sulfate solutions Fulltext Access 14 Pages 2005
Atomic-scale structure of α-FeOOH containing chromium by anomalous X-ray scattering coupled with reverse Monte Carlo simulation Fulltext Access 14 Pages 2005
A self-healing protective film prepared on zinc by treatment in a Ce(NO3)3 solution and modification with Ce(NO3)3 Fulltext Access 14 Pages 2005
Modeling the effect of sulphate on strength development of paste backfill and binder mixture optimization Fulltext Access 14 Pages 2005
Automated manufacturing environment to address bulk permeability variations and race tracking in resin transfer molding by redirecting flow with auxiliary gates Fulltext Access 14 Pages 2005
Effective moduli and failure considerations for composites with periodic fiber waviness Fulltext Access 15 Pages 2005
Thermal stress and intensity release in ferroelectric materials by multiple cracking Fulltext Access 15 Pages 2005
The effect of welding conditions on stray grain formation in single crystal welds - theoretical analysis Fulltext Access 15 Pages 2005
Buckling of optimised flat composite plates under shear and in-plane bending Fulltext Access 15 Pages 2005
Analysis of a laminated anisotropic plate by Chebyshev collocation method Fulltext Access 15 Pages 2005
Performance of long fiber reinforced thermoplastics subjected to transverse intermediate velocity blunt object impact Fulltext Access 15 Pages 2005
A theoretical analysis of linear thermoelastic buckling of composite hemispherical shells with a cut-out at the apex Fulltext Access 15 Pages 2005
Carbon composites based on multi-axial multi-ply stitched preforms. Part 4. Mechanical properties of composites and damage observation Fulltext Access 15 Pages 2005
An experimental study of bolt-hole clearance effects in double-lap, multi-bolt composite joints Fulltext Access 15 Pages 2005
Clay exfoliation and organic modification on wear of nylon 6 nanocomposites processed by different routes Fulltext Access 15 Pages 2005
Ultrasonic goniometry immersion techniques for the measurement of elastic moduli Fulltext Access 15 Pages 2005
Optimal design of the press fit joint for a hybrid aluminum/composite drive shaft Fulltext Access 15 Pages 2005
Inhibition of steel corrosion by calcium benzoate adsorption in nitrate solutions Fulltext Access 15 Pages 2005
The ternary rare-earth polychalcogenides LaSeTe2, CeSeTe2, PrSeTe2, NdSeTe2, and SmSeTe2: Syntheses, crystal structures, electronic properties, and charge-density-wave-transitions Fulltext Access 15 Pages 2005
Preparation and chemical properties of the skutterudites (Ce-Yb)yFe4âx(Co/Ni)xSb12 Fulltext Access 15 Pages 2005
Improving corrosion resistance of magnesium-based alloys by surface modification with hydrogen by electrochemical ion reduction (EIR) and by plasma immersion ion implantation (PIII) Fulltext Access 15 Pages 2005
Influence of reinforcement proportion and matrix composition on pitting corrosion behaviour of cast aluminium matrix composites (A3xx.x/SiCp) Fulltext Access 15 Pages 2005
Morphological analysis and classification of types of surface corrosion damage by digital image processing Fulltext Access 15 Pages 2005
Influence of gel-derived nanocrystalline spinel in a high alumina castable: Part 1 Fulltext Access 15 Pages 2005
Heat treatment effect on the corrosion behaviour of black passivated ZnNi alloys Fulltext Access 15 Pages 2005
Localized attack of copper and brass in tap water: the effect of Pseudomonas Fulltext Access 15 Pages 2005
EIS characterisation of anodic films formed on 2024 aluminium alloy, in sulphuric acid containing molybdate or permanganate species Fulltext Access 15 Pages 2005
Thickness effect on the compressive strength of T800/924C carbon fibre-epoxy laminates Fulltext Access 15 Pages 2005
Manufacturing and low-velocity impact characterization of foam filled 3-D integrated core sandwich composites with hybrid face sheets Fulltext Access 15 Pages 2005
Composite failure prediction of single-L joint structures under bending Fulltext Access 15 Pages 2005
Finite element forming simulation for non-crimp fabrics using a non-orthogonal constitutive equation Fulltext Access 15 Pages 2005
The stored energy of cold work: Predictions from discrete dislocation plasticity Fulltext Access 15 Pages 2005
Comparison of solidification/stabilization effects of calcite between Australian and South Korean cements Fulltext Access 15 Pages 2005
A two-dimensional microsegregation model for the description of microstructure formation during solidification in multicomponent alloys: Formulation and behaviour of the model Fulltext Access 15 Pages 2005
Finite approximations to the second-order properties closure in single phase polycrystals Fulltext Access 15 Pages 2005
Direct observations and analyses of dislocation substructures in the α phase of an α/β Ti-alloy formed by nanoindentation Fulltext Access 15 Pages 2005
On the reaction between NiTi melts and crucible graphite during vacuum induction melting of NiTi shape memory alloys Fulltext Access 15 Pages 2005
Effects of plastic yielding on crack propagation near ductile/brittle interfaces Fulltext Access 15 Pages 2005
Fibre distribution optimisation in fibre-reinforced composites by a genetic algorithm Fulltext Access 15 Pages 2005
Assessment of TBC systems failure mechanisms using a fracture mechanics approach Fulltext Access 15 Pages 2005
Texture evolution during multi-pass equal channel angular extrusion of copper: Neutron diffraction characterization and polycrystal modeling Fulltext Access 15 Pages 2005
Duality of the S–N fatigue curve caused by competing failure modes in a titanium alloy and the role of Poisson defect statistics Fulltext Access 15 Pages 2005
A boundary constraint energy balance criterion for small volume deformation Fulltext Access 15 Pages 2005
Experimental methodology for high strain-rates tensile behaviour analysis of polymer matrix composites Fulltext Access 15 Pages 2005
Passive vibration damping enhancement using carbon nanotube-epoxy reinforced composites Fulltext Access 15 Pages 2005
Damage tolerance assessment of composite sandwich panels with localised damage Fulltext Access 15 Pages 2005
Formation and structural characteristics of Pd–Ag/SiO2 and Pd–Cu/SiO2 catalysts synthesized by cogelation Fulltext Access 15 Pages 2005
Thermomechanical postbuckling of composite laminated plates by the spline finite strip method Fulltext Access 15 Pages 2005
Artificial atom solids based on metal nanocrystals: Formation and electrical properties Fulltext Access 15 Pages 2005
Three-dimensional features of void morphology in resin transfer molded composites Fulltext Access 15 Pages 2005
Characterization of stearic acid modified soy protein isolate resin and ramie fiber reinforced 'green' composites Fulltext Access 15 Pages 2005
Ultraviolet/visible reflection spectroscopy of molten and glassy silicates (MeOn–CaO–SiO2) and phosphates (MeOn–CaO–P2O5), Men+ = Fe3+, Mn2+ Fulltext Access 15 Pages 2005
Role of second phases in the stress corrosion cracking of a nickel–aluminium bronze in saline water Fulltext Access 15 Pages 2005
The evaluation of the repassivation tendency of Cr-Mn and Cr-Ni steels using scratch technique Fulltext Access 15 Pages 2005
Carburization of 310 stainless steel exposed at 800–1100 °C in 2%CH4/H2 gas mixture Fulltext Access 15 Pages 2005
Influence of Pb++ ions on the dissolution and passivation of nickel and Ni–21Cr in acidic solutions Fulltext Access 15 Pages 2005
Atmospheric corrosion in subtropical areas: influences of time of wetness and deficiency of the ISO 9223 norm Fulltext Access 15 Pages 2005
Influence of mixed alkali on the spectral properties of vanadyl ions doped xNa2O-(30 â x)K2O-60B2O3 glasses-an EPR and optical study Fulltext Access 16 Pages 2005
Evaluation procedure for leaching studies on naturally weathered potash-lime-silica glasses with medieval composition by scanning electron microscopy Fulltext Access 16 Pages 2005
Photoelastic analysis of matrix stresses around a high modulus sapphire fibre by means of phase-stepping automated polariscope Fulltext Access 16 Pages 2005
Characterization of transient through-thickness permeabilities of Non Crimp New Concept (NC2) multiaxial fabrics Fulltext Access 16 Pages 2005
A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics Fulltext Access 16 Pages 2005
The development of monodispersed alumino-chromate spinel nanoparticles in doped cordierite glass, studied by in situ X-ray small and wide angle scattering, and chromium X-ray spectroscopy Fulltext Access 16 Pages 2005