کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10135827 | 1645672 | 2019 | 14 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Enhancement of surface reflectivity of fused deposition modeling parts by post-processing
ترجمه فارسی عنوان
افزایش بازتابی سطح قطعات مدل سازی رسوبدهی شده توسط پردازش پس از آن
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
چاپ سه بعدی، مدل سازی رسوب بافته شده، تست مواد، زبری سطح،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
مواد الکترونیکی، نوری و مغناطیسی
چکیده انگلیسی
Fused deposition modeling (FDM) parts were enhanced by post-processing to improve surface quality. After reforming with loading and heating applied, the surface can reflect light. Hence, FDM parts with reflective surfaces fabricated from the regular FDM process can be used as optical elements. In printed specimen tests, one surface of the specimen is put on a sheet glass, and both are heated and pressured together to reform the surface of FDM parts. After testing several materials, almost every printed specimen is affected by post-processing, and the optical reflectivity of the FDM parts is increased. However, shrinkage causes a reduced height, and the shape of the FDM parts is deformed dramatically in higher temperature heating condition. The proposed post-processing method improves the surface of FDM parts, and a fabrication process combining this method and investment casting to manufacture optical CCR arrays (possibly with smaller pitches than the original purchased acylic model) was established.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optics Communications - Volume 430, 1 January 2019, Pages 479-485
Journal: Optics Communications - Volume 430, 1 January 2019, Pages 479-485
نویسندگان
Yu-Fan Chen, Yen-Hung Wang, Jui-che Tsai,