کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10145473 | 1646362 | 2019 | 20 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Beech wood gasification in a dense and fast internally circulating fluidized bed
ترجمه فارسی عنوان
گاز زغال چوب راک در یک تخت مایع متراکم و فشرده داخلی در حال گردش است
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
چکیده انگلیسی
This study deals to improve the understanding of biomass thermo-chemical conversion in a dense and fast internally circulating fluidized bed. The experimental rig used in this study ran either as a dense fluidized bed or as a fast internally circulating fluidized bed. The effect of operating parameters, such as bed temperature (ranging from 750 to 850â¯Â°C), steam gas velocity (between 3 and 9.5 times the minimum fluidization velocity of bed material), steam to biomass mass ratio (ranging from 0.7 to 5.6â¯kg.kgâ1) and biomass shape (sawdust and pellets) is investigated in both dense and fast internally circulating fluidized bed with olivine as bed material. In addition, the effect of bed material nature (olivine and sand) is also studied. Results indicated that syngas composition is strongly dependent on steam to biomass mass ratio. Moreover, it was found that syngas yield is favored by rising bed temperature and steam to biomass mass ratio while it is disadvantaged when fluidizing gas velocity increases. In addition, a greater syngas yield was obtained with olivine particles, compared to sand particles. The effect of bed material circulation flow rate was also investigated in fast internally circulating fluidized bed. Results showed that an increase in this parameter leads to a lower syngas yield. Finally, the experimental results presented in this paper were compared to ones reported in the literature and a good agreement was found.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fuel - Volume 236, 15 January 2019, Pages 554-573
Journal: Fuel - Volume 236, 15 January 2019, Pages 554-573
نویسندگان
Sebastien Pecate, Sid Ahmed Kessas, Mathieu Morin, Mehrdji Hemati,