کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
10274904 461773 2005 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Improving the economics of biodiesel production through the use of low value lipids as feedstocks: vegetable oil soapstock
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
Improving the economics of biodiesel production through the use of low value lipids as feedstocks: vegetable oil soapstock
چکیده انگلیسی
Semirefined and refined vegetable oils are the predominant feedstocks for the production of biodiesel. However, their relatively high costs render the resulting fuels unable to compete with petroleum-derived fuel. We have investigated the production of fatty acid methyl esters (FAME; biodiesel) from soapstock (SS), a byproduct of edible oil refining that is substantially less expensive than edible-grade refined oils. Multiple approaches were taken in search of a route to the production of fatty acid methyl esters from soybean soapstock. The most effective method involved the complete saponification of the soapstock followed by acidulation using methods similar to those presently employed in industry. This resulted in an acid oil with a free fatty acid (FFA) content greater than 90%. These fatty acids were efficiently converted to methyl esters by acid-catalyzed esterification. The fatty acid composition of the resulting ester product reflected that of soy soapstock and was largely similar to that of soybean oil. Following a simple washing protocol, this preparation met the established specifications for biodiesel of the American Society for Testing and Materials. Engine emissions and performance during operation on soy soapstock biodiesel were comparable to those on biodiesel from soy oil. An economic analysis suggested that the production cost of soapstock biodiesel would be approximately US$ 0.41/l, a 25% reduction relative to the estimated cost of biodiesel produced from soy oil.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fuel Processing Technology - Volume 86, Issue 10, 25 June 2005, Pages 1087-1096
نویسندگان
,