Determination of psilocybin in hallucinogenic mushrooms by reversed-phase liquid chromatography with fluorescence detection

The determination of psilocybin was carried out by reversed-phase liquid chromatography (HPLC) with fluorescence (FL) detection. Psilocybin was labeled with 5-dimethylaminonaphthalene-1-[N-(2-aminoethyl)]sulfonamide (DNS-ED) at 60 °C for 4 h in the presence of 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) as the activation reagent. The resulting derivative was separated on a Mightysil RP-18 GP column (150 mm × 4.6 mm, i.d. 3 μm) with the mixture of 50 mM ammonium acetate (AcONH4) and CH3CN, and detected at 539 nm (excitation at 321 nm). The structure of the derivative was identified by HPLC-ESI-MS. A good linear relation of the calibration curve of psilocybin was observed under the proposed conditions for labeling, separation and detection. The quantification limit was 4.4 ng in 1 mg dried mushroom. The proposed procedure was successfully used for the determination of psilocybin in real samples. The contents of psilocybin in six magic mushrooms by the proposed HPLC-FL method were less than 20.0 ng in 1 mg dried samples.