Mineral admixtures in mortars effect of type, amount and fineness of fine constituents on compressive strength

This work is the third part of an overall project the aim of which is the development of general mix design rules for concrete containing different kinds of mineral admixtures (also named mineral additions or mineral constituents). It deals with the compressive strength of mortars made with up to 75% of crushed quartz, limestone filler or fly ash of different fineness. The paper presents all the experimental results as a sort of database and emphasizes the effects on strength of the nature, amount and fineness of mineral admixtures. For short hydration times (1 to 2 days), the nature of mineral admixture is not a significant parameter, as mortars containing the same amount of different kinds of admixtures having equivalent fineness present similar strengths. For long hydration times (up to 6 months), the excess strength due to fly ash pozzolanic activity is quantified by the difference between the strengths of mortars containing the same proportions of inert and pozzolanic admixtures with the same fineness. In the case of inert mineral admixtures, the increase in strength with the fineness of mineral admixtures cannot be explained by the filler effect, but can be attributed to the physical effect of heterogeneous nucleation. In the next part of this work, these results will be used for the elaboration of an empirical model leading to the quantification of both physical and chemical effects. This model presents strong similarities with the previous model based on calorimetric results.