کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10632175 | 992391 | 2005 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Densification of nanocrystalline ITO powders in fast firing: effect of specimen mass and sintering atmosphere
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Nano-sized indium tin oxide (ITO) powders were prepared by a coprecipitation method, and the sintering characteristics in fast firing were examined. The mass of the specimen, sintering atmosphere and sintering temperature varied. Oxygen atmosphere promoted the densification in normal rate sintering, while oxygen inhibited the densification in fast firing. Fast firing severely retarded densification as the mass of the specimen and the sintering temperature increased. This was explained by differential densification, which could easily occur in conditions with a high densification rate and a high thermal gradient in the specimen, where the outer region of the specimen densifies much faster than the center. Once the highly densified outer skeleton is formed, the inside of the specimen is difficult to densify because the outer skeleton geometrically constrains densification.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Research Bulletin - Volume 40, Issue 2, 15 February 2005, Pages 395-404
Journal: Materials Research Bulletin - Volume 40, Issue 2, 15 February 2005, Pages 395-404
نویسندگان
Bong-Chull Kim, Joon-Hyung Lee, Jeong-Joo Kim, Hee Young Lee, Jai-Sung Lee,