کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10673539 | 1010258 | 2008 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
3D finite element analysis of tool wear in machining
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The paper is focused on the 3D numerical prediction of tool wear in metal cutting operations. In particular, an analytical model, able to take into account the diffusive wear mechanism, was implemented through a specific subroutine. Furthermore, an advanced approach to model heat transfer phenomena at the tool-chip interface was included in the numerical simulation. The adopted simulation strategy gave the possibility to properly evaluate the tool wear. The 3D FEM results were compared with some experimental data obtained turning AISI 1045 steel using uncoated WC tool; a good agreement was found out.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 57, Issue 1, 2008, Pages 61-64
Journal: CIRP Annals - Volume 57, Issue 1, 2008, Pages 61-64
نویسندگان
A. Attanasio, E. Ceretti, S. Rizzuti, D. Umbrello, F. Micari,