Design and test of a device for acceleration reproducibility of hand held olive harvesters

• Construction of a device for HAV laboratory measurements of hand held olive harvester.
• Reproducibility among laboratories of HAV measures of hand held olive harvesters.
• Field and laboratory measurements on HAV produced by hand held olive harvesters.

Hand held olive harvesters may cause severe HAV (Hand Arm Vibration) pathologies to the operators. The measured vibration data should be available to the end users in the instruction manual issued by the manufacturers, who should follow the procedures specified by a C type European standard.Since the hand held olive harvesters do not have such a standard, manufacturers are not able to provide reliable data. This paper describes a test methodology in view of a C type European standard for these machines.The work started with field activities to collect acceleration data to compare with laboratory results, as requested by the EN ISO 20643. A device to simulate the dynamic vibration response of olive tree branches was then designed, assembled and tested with different configurations, to obtain repeatable acceleration data of hand held olive harvester. When the final prototype was configured, a second laboratory was involved, equipped with a different measurement chain to test the reproducibility.Relevance to industryThis paper describes the use of a new custom built device (designed and assembled by the Authors) to simulate the dynamic vibration response of olive tree branches, to obtain repeatable acceleration data of hand held olive harvester. Laboratory tests showed that device can support companies in their task of designing safe and health hand held olive harvesters.