کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
11003902 1463451 2018 22 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Development of bonded joints using novel CNT doped adhesive films: Mechanical and electrical properties
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
پیش نمایش صفحه اول مقاله
Development of bonded joints using novel CNT doped adhesive films: Mechanical and electrical properties
چکیده انگلیسی
The effect of the addition of carbon nanotubes (CNTs) to adhesive films in composite joints has been studied due to their potential in structural health monitoring (SHM) applications. Carbon nanotube dispersion has been prepared by sonication in an aqueous media using sodium dodecyl sulfate (SDS) as surfactant. A dispersion procedure has been developed to promote a homogeneous dispersion of CNTs within an adhesive. Studies of aqueous dispersions have been carried out by FEG-SEM analysis, proving the disaggregation effect that SDS has on the CNT dispersion and the breakage induced by sonication. By mechanical testing of adhesive joints, it has been observed that the addition of CNTs does not have a significant effect on lap shear strength (LSS), with the best results being achieved in the case of dispersions made with 0.25 wt%. A microstructural study of fracture surfaces shows that the main failure mode is cohesive although in some areas adhesive failure has been observed. In this regard, there is no significant difference between doped and non-doped joints. In addition, electrical conductivity through the bonding line is highly improved, making the adhesive joint electrically conductive, which proves its potential for SHM applications.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Adhesion and Adhesives - Volume 86, November 2018, Pages 98-104
نویسندگان
, , , , , ,