کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
11003906 1463451 2018 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Low-stress creep deformation in two opto-electronic glass-epoxy joints: Part II - Joint measurements and FEA
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
پیش نمایش صفحه اول مقاله
Low-stress creep deformation in two opto-electronic glass-epoxy joints: Part II - Joint measurements and FEA
چکیده انگلیسی
The creep deformation of two glass-epoxy adhesive joints, representative of joint designs used in opto-electronic devices, was measured at various temperatures and relatively low stress levels using a novel, ultra-sensitive method employing optical interference fringes. The adhesive creep models obtained in Part I were then used as the constitutive equations in finite element models of the joints with the objective of assessing the accuracy of the predictions of creep deformation at the low stresses typical of opto-electronic applications. Good agreement was obtained for both adhesives; however, the higher modulus adhesive was more complicated, exhibiting highly non-linear creep behavior as the stress levels approached zero. The lower modulus adhesive was shown to be linearly viscoelastic over the entire range of stresses encountered in the opto-electronic joints.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Adhesion and Adhesives - Volume 86, November 2018, Pages 131-138
نویسندگان
, , , ,