Evolution of mechanical properties in aerial lime mortars of traditional manufacturing, the relationship between putty and powder lime

In recent years, numerous studies have been published on the technology of industrial aerial lime mortars. These papers refer to the incidence of carbonation process and mechanical behavior in its properties as construction material, of interest for its application in Cultural Heritage conservation. Among other issues, the importance of the type of aggregate (composition and granulometry) and relation binder/water (B/W) in its properties are highlighted. There are fewer papers in which the type of lime is about, especially on the basis of its manufacturing process (traditional or industrial), on the presentation of the product (powder or putty), or referred to the different types of mortars (prepared in situ or pre-dosed). In this paper, the behavior of aerial lime mortars elaborated with traditional lime has been determined and a comparative study has been carried out with pre-dosed mortars of powder (mCL) and in putty (mSPL) lime for its application in render mortar (B) and plaster mortar (F). The control parameters have been mechanical resistances-elasticity, ultrasound velocity, carbonation process and distribution pore size and surface area by mercury porosimetry. It is concluded that the behavior of traditional lime mortars, both in putty and powder, depends on the B/W ratio, the type of aggregates and the lime content. The importance of the application of the product in the building as the behavior of the mortar is very sensitive to kneading water content it shows; aspects that define the plasticity of the mortar. It is also concluded that the carbonation of traditional lime mortars is not slow and that, under optimal dosages conditions, can be finished before 90 days. It is also verified that a higher carbonation rate does not imply better properties of the mortar in its long-term construction. The utility of ultrasound velocity test as a non-destructive test and easy to apply on building for the quality control of traditional lime mortars and its consistence values it highlights, as is a macroscopic property of easy control during the elaboration of the product.