کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1162787 1490900 2016 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Determination of the four major surfactant classes in cleaning products by reversed-phase liquid chromatography using serially connected UV and evaporative light-scattering detection
ترجمه فارسی عنوان
تعیین چهار گروه عمده مواد سورفکتانت در تمیز کردن محصولات با استفاده از کروماتوگرافی مایع فاز برگشتی با استفاده از تشخیص پراکندگی نوری و تبخیری از طریق سریال متصل
کلمات کلیدی
تشخیص پراکندگی نور تبخیری، اسیدهای چرب، اتوکسیلات الکل چرب، آلکیل اتر سولفات، آلکیل بنزنولفونات های خطی، ایلین، محصولات پاک کننده
موضوعات مرتبط
مهندسی و علوم پایه شیمی شیمی آنالیزی یا شیمی تجزیه
چکیده انگلیسی


• Single run LC determination of the four major surfactant classes in cleaning products.
• Serially connected UV and ELSD detection.
• Quantitation of coeluting LAS and AES in real commercial samples.
• Use of UV to correct ELSD predictions.

A method for the simultaneous determination of the most frequently used surfactant families –linear alkyl benzenesulphonates (LAS), alkyl ether sulphates (AES), fatty alcohol ethoxylates (FAE) and oleins (soaps, fatty acid salts) – in cleaning products, has been developed. The common reversed phase octyl (C8), pentafluorophenyl and biphenyl columns were not capable of separating the anionic LAS and AES classes; however, since only LAS absorbs in the UV, these two classes were independently quantified using a C8 column and serially connected UV and ELSD detection. The best compromise to resolve the four surfactant classes and the oligomers within the classes was achieved with a C8 column and an ACN/water gradient. To enhance retention of the anionic surfactants, ammonium acetate, as an ion-pairing agent compatible with ELSD detection, was used. Also, to shift the olein peaks with respect to that of the FAE oligomers, acetic acid was used. In the optimized method, modulation of the mobile phase, using ammonium acetate during elution of LAS and AES, and acetic acid after elution of LAS and AES, was provided. Quantitation of the overlapped LAS and AES classes was achieved by using the UV detector to quantitate LAS and the ELSD to determine AES by difference. Accuracy in the determination of AES was achieved by using a quadratic model, and by correcting the predicted AES concentration according to the LAS concentration previously established using the UV chromatogram. Another approach also leading to accurate predictions of the AES concentration was to increase the AES concentrations in the samples by adding a standard solution. In the samples reinforced with AES, correction of the predicted AES concentration was not required. FAE and olein were quantified using also quadratic calibration.

Figure optionsDownload as PowerPoint slide

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Analytica Chimica Acta - Volume 932, 17 August 2016, Pages 106–113
نویسندگان
, , ,