Flower-like self-assembly of gold nanoparticles for highly sensitive electrochemical detection of chromium(VI)

We report here the fabrication of a flower-like self-assembly of gold nanoparticles (AuNPs) on a glassy carbon electrode (GCE) as a highly sensitive platform for ultratrace Cr(VI) detection. Two AuNP layers are used in the current approach, in which the first is electroplated on the GCE surface as anchors for binding to an overcoated thiol sol–gel film derived from 3-mercaptopropyltrimethoxysilane (MPTS). The second AuNP layer is then self-assembled on the surface of the sol–gel film, forming flower-like gold nanoelectrodes enlarging the electrode surface. When functionalized by a thiol pyridinium, the fabricated electrode displays a well-defined peak for selective Cr(VI) reduction with an unusually large, linear concentration range of 10–1200 ng L−1 and a low detection limit of 2.9 ng L−1. In comparison to previous approaches using MPTS and AuNPs on Au electrodes, the current work expands the use of AuNPs to the GCE. Subsequent functionalization of the secondary AuNPs by a thiol pyridinium and adsorption/preconcentration of Cr(VI) lead to the unusually large detection range and high sensitivity. The stepwise preparation of the electrode has been characterized by electrochemical impedance spectroscopy (EIS), scanning electronic microscopy (SEM), and IR. The newly designed electrode exhibits good stability, and has been successfully employed to measure chromium in a pre-treated blood sample. The method demonstrates acceptable fabrication reproducibility and accuracy.

Figure optionsDownload as PowerPoint slideHighlights
► Fabrication of a flower-like self-assembly of two AuNP layers on a GCE.
► Cr(VI) detection: 10–1200 ng L−1 concentration range; 2.9 ng L−1 detection limit.
► The 1st AuNP layer on the GCE surface as anchors for a thiol sol–gel film.
► The sol–gel film link the 1st AuNP layer to the 2nd AuNP layer.
► Functionalization of the 2nd AuNP layer by a thiol pyridinium for HCrO4− detection.