A comparison of devices using thermal desorption for mercury speciation in solids

• 3 thermal desorption-based mercury species identification devices were compared.
• The desorption temperatures of each mercury compound were similar in the 3 devices.
• A new set-up for identifying mercury species in all types of solids was developed.

The goal of this work is to emphasize the reliability of the thermal desorption technique in identifying mercury species. The analysis of mercury species in solids is essential for assessing the risk of disposal or re-use of mercury-contaminated materials. This study evaluates the accuracy and reliability of thermal desorption as a technique for identifying mercury species by means of different thermo-desorption devices. For this purpose, mercury species present in samples related with coal utilization processes were identified. Three devices were compared for analyzing samples free of carbon or with a low carbon content (fly ashes, gypsums and soils), and a new equipment was developed to analyze samples with a high carbon content (coal). In spite of the fact that the first three devices employ different experimental conditions (i.e., heating rate, gas flow and carrier gas), the mercury species identified in the samples were comparable in all cases. The need for new equipment for mercury speciation in materials containing carbon was a consequence of interferences produced from the pyrolysis products of the organic matter. The new device consists of two furnaces and two gas inlets to allow thermal oxidation of organic pyrolysis products and the identification of mercury species in carbonaceous samples. This new approach offers the application of thermal desorption to mercury speciation in all types of materials contaminated with mercury.

Figure optionsDownload as PowerPoint slide