Phosphorescent dye-doped hole transporting layer for organic light-emitting diodes

• Organic phosphorescent dye-doped charge transporting layer is introduced in OLEDs.
• Energy barrier and charge accumulation can be reduced by dye-doped charge transporting layer.
• OLEDs based on this structure show significantly enhanced operational stability.

Hole transport materials are critical to the performance of organic light-emitting diodes (OLEDs). While 1,1-bis(di-4-tolylaminophenyl)cyclohexane (TAPC) with a high triplet energy is widely used for high efficiency phosphorescent OLEDs, devices using TAPC as a hole transport layer (HTL) have a short operating lifetime due to the build-up of trapped charges at the TAPC/emitting layer (EML) interface during device operation. In this work, to solve the operating stability problem, instead of using conventional HTLs, we use a(fac-tris(2-phenylpyridine)iridium (III))(Ir(ppy)3) doped layer as an HTL to replace the conventional HTLs. Because of the hole injecting and transporting abilities of the phosphorescent dye, holes can be directly injected into the emitting layer without an injection barrier. OLEDs based on a phosphorescent dye-doped HTL show significant improvement in operational stability without loss of efficiency.

Figure optionsDownload as PowerPoint slide