کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1290456 | 1498037 | 2008 | 9 صفحه PDF | دانلود رایگان |
The development of a cathode catalyst layer based on a supported Pt catalyst using an ordered mesoporous carbon (OMC) for direct methanol fuel cell is reported. An OMC with a mesopore structure between hexagonally arranged carbon nanorods is prepared using a template method. Platinum nanoparticles are supported on the OMC (Pt/OMC) with high metal loading of 60 wt.%. Compositional and morphological variations are made by varying the ionomer content and by compressing the catalyst layer to detect a parameter that determines the power performance. Increase in power density with decrease in the volume fraction of ionomer in the agglomerate comprising the Pt/OMC and the ionomer indicates that mass transport through the ionomer phase governs the kinetics of oxygen reduction. Impedance spectroscopic analysis suggests that a significant mass-transport limitation occurs at high ionomer content and in the compressed cathode. The power density of the optimum cathode layer, which employs a Pt/OMC catalyst with a Pt loading of 2 mg cm−2, is greater than that of a catalyst layer with 6 mg cm−2 Pt-black catalyst at a voltage higher than 0.4 V. This would lead to a significant reduction in the cost of the membrane electrode assembly.
Journal: Journal of Power Sources - Volume 180, Issue 2, 1 June 2008, Pages 724–732