Chemically activated fungi-based porous carbons for hydrogen storage

A set of porous carbons has been prepared by chemical activation of various fungi-based chars with KOH. The resulting carbon materials have high surface areas (1600–2500 m2/g) and pore volumes (0.80–1.56 cm3/g), regardless of the char precursors. The porosities mainly derived from micropores in activated carbons strongly depend on the activation parameters (temperature and KOH amount). All activated carbons have uniform micropores with pore size of 0.8–0.9 nm, but some have a second set of micropores (1.3–1.4 nm pore size), further broadened to 1.9–2.1 nm as a result of increasing either the activation temperature to 750 °C or KOH/char mass ratio to 5/1. These fungi-based porous carbons achieve an excellent H2 uptake of up to 2.4 wt% at 1 bar and −196 °C, being in agreement with results from other porous carbonaceous adsorbents reported in the literature. At high pressure (ca. 35 bar), the saturated H2 uptake reaches 4.2–4.7 wt% at −196 °C for these fungi-based porous carbons. The results imply a great potential of these fungi-based porous carbons as H2 on-board storage media.