Recycling petroleum coke in blended cement mortar to produce lightweight material for Impact Noise Reduction

This work introduces a new way to use low-cost petroleum (pet) coke as lightweight aggregate in cement mortars to make sound barriers. The feasibility of adding pet coke in cement matrix was investigated: an in-depth characterization of as-received coke and the new lightweight mortar was made. The acoustic behaviour herein was assessed by constructing a large dimension mortar slab (made of cement and coke as aggregate) used as floor covering and measuring, according to the procedure described in international standards, the impact noise pressure level over the range of frequencies 100–5000 Hz. Impact Noise Reduction (INR) was also obtained and the results were compared to the ones experimentally obtained from a control mortar slab (made of cement and sand). Results showed that coke addition leads to a decrease in mechanical properties of resultant mortars, this is principally due to an increase of the porosity (∼60%). A gradual increase of impact noise insulation was observed in lightweight floor covering from middle to higher frequencies tested, reaching, within this range, a remarkable improvement of sound insulation compared to control slab (∼14 dB).