Preparation and characterization of porous alumina ceramics through starch consolidation casting technique

This work aims at studying the influence of thermal treatment on the microstructure, resistivity and technological properties of porous alumina ceramics prepared via starch consolidation casting (SCC) technique. Colloidal suspensions were prepared with three different contents of alumina solid loading (55, 60 and 65 mass%) and corn starch (3, 8 and 13 mass%). The sintered samples at 1400, 1500, 1600 and 1700 °C, show open porosity between 46 and 64%, depending on the starch content in the precursor suspensions and sintering temperature. The pore structures were analyzed by SEM. The effect of corn starch content on the apparent porosity, pore size distribution, linear shrinkage and electrical resistivity as well as cold crushing strength of the sintered porous alumina ceramics was also measured. These porous alumina ceramics are promising porous ceramic materials for using in a wide range of thermal, electrical and bioceramics applications as well as filters/membranes and gas burners, due to their excellent combination properties.