Fabrication and mechanical behaviors of cementitious composites reinforced by 3D woven lattice sandwich fabrics

• Three-dimensional woven lattice reinforced cement composites were fabricated.
• WTSC enhances the strength of cementitious foam at a rate of 400%.
• Flexural capacity of WLRCC beam is four times greater.
• Excellent bonds make deflections ten times greater.

Glass fibers were firstly woven to form three-dimensional (3D) woven lattice sandwich fabrics (WLSFs) which then were applied to reinforce cementitious foams and mortars to fabricate novel ductile cementitious composites. Failure behaviors of WLSF reinforced cementitious composite structures were studied through compression and three-point bending experiments. The WLSF greatly enhances the strength of cementitious foams at a level of four times. For cementitious mortars, compression strength of WLSF reinforced blocks is a little greater for the fraction of the textile is small as well as the compression strength of the textile pillars is not strong. But in flexure, excellent stretching ability of the glass fiber textiles greatly improves the flexural behavior of WLSF reinforced cementitious composite panels. Load capacity and ultimate deflection of these composite panels were greatly enhanced. Flexural capacity of the WLSF reinforced beam is four times greater. Reinforced by WLSF, failure of the cementitious composite is ductile.