Effects of a magnetic field on the anodic dissolution, passivation and transpassivation behaviour of iron in weakly alkaline solutions with or without halides

The effects of a 0.4 T horizontal magnetic field on the anodic dissolution, passivation and transpassivation behaviour of iron in bicarbonate solutions of various concentrations and in dilute bicarbonate solutions with or without halides are investigated by electrochemical polarisation measurements. The applied magnetic field does not affect the activation-controlled anodic current, the steady passive current and the transpassive current, but significantly affects the activation–passivation transition processes for iron in bicarbonate solutions without halides. The effects of magnetic field are strongly dependent on passivation mechanisms that result in different types of surface films and corresponding rate determining steps of film dissolution. There is a synergistic effect between the applied magnetic field and halides, chlorides or bromides, on attacking the passivation of iron in dilute bicarbonate solutions. The effects of the magnetic field are analysed based on the previously proposed electrochemical kinetics equations. The magnetic field affects the anodic polarisation behaviour through its enhancing effects on mass transport processes at the precipitation–dissolution type surface film/solution interfaces. The magnetic field shows little or no effects on continuous and steady passivation films where the oxidation rate is controlled by mass transport processes within surface films. Magnetoelectrochemistry measurements are suggested as a prospective method for researches on corrosion or passivation mechanisms.