Effects of TiO2 film thickness on photovoltaic properties of dye-sensitized solar cell and its enhanced performance by graphene combination

• DSSC based on TiO2 film with 8 printing layers showed the highest efficiency.
• The photoelectric conversion efficiency of the DSSC increased from 5.52% to 6.49% by graphene combination.
• A mechanism for the enhanced performance of the DSSC was proposed.

Dye-sensitized solar cells based on TiO2 films with different printing layers (6-10) were fabricated by screen printing method. The prepared samples were characterized by scanning electron microscopy, X-ray diffraction and UV–vis absorption spectroscopy. The effects of thickness on the photoelectric conversion performance of the as-fabricated DSSCs were investigated. An optimum photoelectric conversion efficiency of 5.52% was obtained in a DSSC with 8 printing layers. Furthermore, after a moderate amount of graphene was combined with TiO2, the photoelectric conversion efficiency of the DSSC based on graphene/TiO2 composite film rose from 5.52% to 6.49%, with an increase of η by 17.6%. The results indicated that graphene not only enhances the transport of electrons from the film to the fluorine doped tin oxide substrates and reduces the charge recombination rate, but also reduces the electrolyte–electrode interfacial resistance, clearly increasing the photoelectric conversion efficiency.

Figure optionsDownload as PowerPoint slide