Effect of artificial roughness on heat transfer and friction characteristics having multiple arc shaped roughness element on the absorber plate

• An experimental investigation of heat transfer and friction factor study has been carried out.
• Multiple arc-shaped artificial roughened rectangular duct was chosen for the present study.
• Thermo-hydraulic performance parameter were investigated and compared.

In this present experimental investigation the effect of geometrical parameters of multiple arc shaped roughness element on heat transfer and friction characteristics of rectangular duct solar air heater having roughness on the underside of the absorber plate have been studied. The parameters were selected on the basis of practical considerations and operating conditions of solar air heaters. The experiments carried out encompasses Reynolds number (Re) in the range of 2200–22,000, relative roughness height (e/D) range of 0.018–0.045, relative roughness width (W/w) ranges from 1 to 7, relative roughness pitch (p/e) range of 4–16 andarc angle (α) ranges from 30 to 75°. The thermo-hydraulic performance parameter was found to be best for relative roughness width (W/w) of 5.