کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
157640 | 456979 | 2009 | 10 صفحه PDF | دانلود رایگان |
The commercially established slurry bubble column and fixed-bed reactors for low temperature Fischer–Tropsch synthesis were compared with novel micro- and monolith-reactors by mathematical modeling. Special attention was paid to the influence of catalytic activity on the reactor efficiency and the losses by mass and heat transfer resistances. The simulation results show that a micro-structured reactor exhibits the highest productivity per unit of catalyst volume followed by slurry bubble column reactor and monolith reactor. The fixed-bed reactor that was assumed to operate in the trickle-flow regime has a particularly low catalyst specific productivity due to severe mass transfer resistances. However, caused by a very low ratio of catalyst and reactor volume the micro-reactor has only a similarly low productivity per unit of reactor volume as the fixed-bed reactor. In contrast, the reactor specific productivity of slurry bubble column reactor and monolith reactor is up to one order of magnitude higher.
Journal: Chemical Engineering Science - Volume 64, Issue 5, March 2009, Pages 955–964