Determination of the Optimal Configuration of Energy Recovery Ventilator through Virtual Prototyping and DoE Techniques

This study presents an approach based on Design of Experiment (DoE) technique for the optimization of an energy recovery ventilator (ERV). This system is one of the efficient ways to enhance the thermo-hygrometric comfort without increase excessively the thermal load in domestic kitchen. However, there is a major concern, which energy recovery cannot trade off ERV's fan power consumption. The goal of this study is to obtain the information about the relation between factors and response in an empirical way. This approach integrates three different levels of analysis: the virtual prototyping, Design of Experiment (DoE) and rapid prototyping. The virtual analysis allows to define the principal parameterization of a simplified model and to simulate the performance of each configuration at working condition. The proposed approach investigates the effect of the defined parameters and noise factor on the experimental results. In particular, the applied method for DoE analysis is based on virtual experiments in according to the necessity to reduce time and costs during the early design phase. The optimum parameters configuration, which is defined by the previous step, is useful to define the geometry and the working condition of a reliable virtual model. The final level is the realization of a 3D ERV with a rapid prototyping printer. The obtained component is now evaluable at the test bench to investigate the air flow rate and the electric power consumption.