کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1698426 | 1519306 | 2016 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Geometry Optimization of Polycrystalline Diamond Tools for the Milling of Sintered ZrO2
ترجمه فارسی عنوان
بهینه سازی هندسه ابزار الماسی پلی کریستالی برای فرز متخلخل ذرات ZrO2
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
فرزکاری؛ سرامیک؛ ابزار الماس
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
Recent developments on tangential ultrashort-pulsed laser processing enable the generation of solid polycrystalline diamond composite tools with increasing geometric flexibility. To exploit this potential, an experimental study on the influence of the tool geometry on the cutting characteristics and the tool wear while milling sintered Zirconia dioxide is conducted. Three different tool geometries and a variation in rake and flank angles are produced to investigate the effects on processing forces and tool lifetime. The results are applied to the design of an end mill achieving 1.2 mm3/mm s specific material removal rate over a tool lifetime of 8000 mm3/mm.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia CIRP - Volume 46, 2016, Pages 290–293
Journal: Procedia CIRP - Volume 46, 2016, Pages 290–293
نویسندگان
Maximilian Warhanek, Josquin Pfaff, Pablo Martin, Lukas Schönbächler, Jens Boos, Konrad Wegener,