کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1698486 | 1519307 | 2016 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of Feed on Sub-surface Deformation and Yield Strength of Oxygen-free Pitch Copper in Machining
ترجمه فارسی عنوان
اثر تغذیه بر تغییرات سطح زیر سطحی و مقاومت کششی مس پیت اکسیژن در ماشینکاری ☆
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
تغییر شکل زیر سطح؛ قدرت عملکرد ماشینکاری فلز مس
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
The article deals with the influence of the machining induced surface integrity on tensile properties of 99.99% purity Oxygen-Free Pitch copper (OFC), used in nuclear and research facilities. The increase in the feed in machining was found to lead to an increase, up to 55%, in yield strength of the OFC specimens. Intensive sub-surface deformation and a high degree of work-hardening in the near-surface layer are attributed to this effect. Increase of feed resulted in an increase of deformation depth ɛIII and work-hardening ΔH detected via SEM and nanoindentation. The correlation coefficient between the tensile properties and sub-surface deformation was found to equal R = 0.983.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia CIRP - Volume 45, 2016, Pages 103–106
Journal: Procedia CIRP - Volume 45, 2016, Pages 103–106
نویسندگان
Mike Olsson, Volodymyr Bushlya, Jinming Zhou, Jan-Eric Ståhl,