Synthesis and characterization of graphene–nickel oxide nanostructures for fast charge–discharge application

Graphene–metal oxide composites as anode materials for Li-ion batteries have been investigated extensively, but these attempts are mostly limited to moderate rate charge–discharge applications. Here, graphene–nickel oxide nanostructures have been synthesised using a controlled hydrothermal method, which enabled in situ formation of NiO with a coralloid nanostructure on graphene. Graphene/NiO (20%), graphene/NiO (50%) and pure NiO show stable discharge capacities of 185 mAh/g at 20 C (1 C = 300 mA/g), 450 mAh/g at 1 C, and 400 mAh/g at 1 C, respectively. High rate capability and good stability in prolonged charge–discharge cycling permit the application of the material in fast charging batteries for upcoming electric vehicles. To the best of our knowledge such fast rate performance of graphene/metal oxide composite as anode and such stability for pure NiO as anode have not been reported previously.

► Graphene/metal oxide anode for fast charge/discharge application was studied.
► Higher NiO% in graphene showed higher capacity at low current rates.
► Lower NiO% in graphene showed faster and good charge/discharge performance.
► Coralloid nanostructure of NiO showed high stability in cycling as an anode at moderate currents.
► Such stability for pure NiO and such fast rates for NiO/graphene have not been reported previously.